15GA 3/4 Inch Bright Finish Upholstery Hog Rings for Fencing

Product Description

Overview

15GA 3/4 Inch Bright Finish Upholstery Hog Rings for Fencing


●  15 Gauge 3/4'' crown c ring staples.

●  Made of Galvanized Steel.

●  Staples Compatible with C7E, C7CA

● These rings have a good bundle effect.

● Made of high quality metal, better corrosion resistance.

Sharp point nails deliver efficient and dependable performance.

Ideal for mattress, car seat, sofa, fencing, pet cage, traps, sausage casings and dozen more uses around farm and home.


Product Description


Upholstery Hog Rings 15100:

Item: 15GA 3/4 Inch Bright Finish Upholstery Hog Rings for Fencing
Gauge: 15 Gauge
Fastener Type: Hog rings
Material: Galvanized Wire
Surface Finishing: Bright Finish
Point: Sharp
Outside Diameter: 3/4 inch
Thickness: 1.80mm
Height 12.0mm
Packing: 10000 pcs/ctn
Fitting Tools: C7E, C7CA


Other Rings in this Series:

Description Part # Strip Size Box Count Box Weight Box Per Skid Skid Weight
Bright Basic Sharp Point 15100 100 rings 10,000 rings 17 lbs. 100 boxes 1,700 lbs.
Bright Basic Blunt Point 15100B 100 rings 10,000 rings 17 lbs. 100 boxes 1,700 lbs.
Galvanized Sharp Point 15G100 100 rings 10,000 rings 17 lbs. 100 boxes 1,700 lbs.
Galvanized Blunt Point 15G100B 100 rings 10,000 rings 17 lbs. 100 boxes 1,700 lbs.
Stainless Steel Sharp Point 15SS100 100 rings 10,000 rings 17 lbs. 100 boxes 1,700 lbs.
Stainles Steel Blunt Point 15SS100B 100 rings 10,000 rings 17 lbs. 100 boxes 1,700 lbs.
Application

1. Gabion fixing
2. Steel cages
3. Fence
4. Gadernning fixure
5. Closing bag
6. River mattress
7. Outdoor industries fixing etc

Finishing

Bright Finish

Bright fasteners have no coating to protect the steel and are susceptible to corrosion if exposed to high humidity or water. They are not recommended for exterior use or in treated lumber, and only for interior applications where no corrosion protection is needed. Bright fasteners are often used for interior framing, trim and finish applications.


Hot Dip Galvanized (HDG)

Hot dip galvanized fasteners are coated with a layer of Zinc to help protect the steel from corroding. Although hot dip galvanized fasteners will corrode over time as the coating wears, they are generally good for the lifetime of the application. Hot dip galvanized fasteners are generally used for outdoor applications where the fastener is exposed to daily weather conditions such as rain and snow. Areas near the coasts where the salt content in rain water is much higher, should consider Stainless Steel fasteners as salt accelerates the deterioration of the galvanization and will accelerate corrosion. 


Electro Galvanized (EG)

Electro Galvanized fasteners have a very thin layer of Zinc that offers some corrosion protection. They are generally used in areas where minimal corrosion protection is needed such as bathrooms, kitchens and other areas that are susceptible to some water or humidity. Roofing nails are electro galvanized because they are generally replaced before the fastener begins to wear and are not exposed to harsh weather conditions if installed properly. Areas near the coasts where salt content in rain water is higher should consider a Hot Dip Galvanized or Stainless Steel fastener. 


Stainless Steel (SS)

Stainless steel fasteners offer the best corrosion protection available. The steel may oxidize or rust over time but it will never lose its strength from corrosion. Stainless Steel fasteners can be used for exterior or interior applications and generally come in 304 or 316 stainless steel. 


Pneumatic Hog Ring Tool C-7EA

Air Powered Hog Ring Gun C-7CA52

Hog Ring Plier SC-7C

Pneumatic 18 Gauge 1/4 Inch Narrow Crown Stapler 440KB

Pneumatic 18 Gauge 1/4 in Narrow Crown Stapler 9025

Pneumatic 18 Gauge 1/4 Inch Narrow Crown Stapler 9040

Pneumatic Hog Ring Stapler C7