15 Degree Galvanized Trox Head Plastic Sheet Coil Nail Screw 2.8x50mm
Product Description
15 Degree Galvanized Trox Head Plastic Sheet Coil Nail Screw 2.8x50mm
●Twice as fast as ordinary collated screws
● Can be used in most popular nailers
● Compatable with Bostitch, Hitachi, Senco
● Fine thread or Coarse Threaded.
● Can be used for very many different applications, both outdoors and indoors, due to the residue-free processing.
15 Degree Galvanized Trox Head Plastic Sheet Coil Nail Screw 2.8x50mm
Collation type: | Plastic Sheet Coil |
Inner diameter: | 2.5 - 3.2 mm | 0.099 - 0.126" |
Outer diameter: | 2.8 - 3.9 mm | 0.113 - 0.153" |
Length: | 25 - 90 mm | 1 - 3 1/2" |
Thread type: | Fine Thread, Coarse Thread, Steelthread, |
Surface treatment : | Electro galvanized,Hot dip galvanized,Bright,Mechanical galvanized |
Drive type | phillips®, pozi (Pozidriv®), Torx®, square, versa |
Coil capacity : | 200 - 325 |
Material : | Standard steel, Stainless Steel 304 / A2, Stainless Steel 316 / A4 |
Collation degrees : | 0° & 15° |
Screw Head
Screw Point
These fasteners come in five different styles:
Speed and Flexibilit
Improve work efficiency with Screw fasteners. These products perform two times quicker than collated screws and eight times faster than bulk screws. Because they work with existing pneumatic nailers, you don't have to invest in new equipment to enjoy their efficient functionality.
In addition, Screws fasteners aren't just quickly driven; they're adjustable and removable after you place them. Unlike collated screws, you get reliable flexibility that's suited to a wide array of applications.
Commercial metal roofing
Residential roofing
Siding installation
Subflooring
Pallet and crate construction
Fencing
Outdoor furniture assembly and more
Screws are more dependable than other screws. Their holding power gives you greater peace of mind than you'd enjoy with other less powerful fasteners.
Bright Finish
Bright fasteners have no coating to protect the steel and are susceptible to corrosion if exposed to high humidity or water. They are not recommended for exterior use or in treated lumber, and only for interior applications where no corrosion protection is needed. Bright fasteners are often used for interior framing, trim and finish applications.
Hot Dip Galvanized (HDG)
Hot dip galvanized fasteners are coated with a layer of Zinc to help protect the steel from corroding. Although hot dip galvanized fasteners will corrode over time as the coating wears, they are generally good for the lifetime of the application. Hot dip galvanized fasteners are generally used for outdoor applications where the fastener is exposed to daily weather conditions such as rain and snow. Areas near the coasts where the salt content in rain water is much higher, should consider Stainless Steel fasteners as salt accelerates the deterioration of the galvanization and will accelerate corrosion.
Electro Galvanized (EG)
Electro Galvanized fasteners have a very thin layer of Zinc that offers some corrosion protection. They are generally used in areas where minimal corrosion protection is needed such as bathrooms, kitchens and other areas that are susceptible to some water or humidity. Roofing nails are electro galvanized because they are generally replaced before the fastener begins to wear and are not exposed to harsh weather conditions if installed properly. Areas near the coasts where salt content in rain water is higher should consider a Hot Dip Galvanized or Stainless Steel fastener.
Stainless Steel (SS)
Stainless steel fasteners offer the best corrosion protection available. The steel may oxidize or rust over time but it will never lose its strength from corrosion. Stainless Steel fasteners can be used for exterior or interior applications and generally come in 304 or 316 stainless steel.