KYA A11 Series fine wire staples are 20 gauge glue-collated staples for compatible upholstery, furniture and light-duty fastening tools. The published A11 profile has a 10.55mm nominal crown, 1.25mm wire width and 0.50mm wire thickness.
The series is available in 6mm, 8mm, 10mm, 12mm, 14mm and 16mm leg lengths, covering nominal sizes from 1/4" through 5/8". Each published configuration is packed with 84 staples per stick and 5,000 staples per box.
| Parameter | Published Specification |
|---|---|
| Series | A11 Series / A1110 |
| KYA Code | KYA-A1110 |
| Gauge | 20 Gauge |
| Fastener Type | Fine Wire Staple |
| Crown | 10.55mm, nominal 3/8" |
| Wire Width | 1.25mm / 0.049" |
| Wire Thickness | 0.50mm / 0.020" |
| Published Wire Designation | 0.88# |
| Length Range | 6mm–16mm / 1/4"–5/8" |
| Available Sizes | A11/06, A11/08, A11/10, A11/12, A11/14, A11/16 |
| Published Materials | Steel / Stainless Steel / Aluminum |
| Published Finish | Zinc Plated / Galvanized |
| Point Type | Chisel Point |
| Collation | Glue Collated |
| Pcs/Stick | 84 pcs |
| Pcs/Box | 5,000 pcs |
| Boxes/Carton | 20 boxes |
| Cartons/Pallet | 60 cartons |
The published 0.88# value is retained as KYA's series designation. For actual dimensional matching with a stapler, use the published 1.25mm × 0.50mm wire profile and 10.55mm crown.
KYA currently uses A1110 as the model and KYA-A1110 as the page code while also listing the complete A11/06–A11/16 size range. For purchasing, specify the exact leg-length model rather than relying only on the A1110 page name.
For example, A11/10 identifies the 10mm (3/8") leg-length configuration, while A11/06, A11/08, A11/12, A11/14 and A11/16 identify the other published lengths.
| Model | Leg Length | Crown | Wire | Finish | Pcs/Box |
|---|---|---|---|---|---|
| A11/06 | 6mm / 1/4" | 10.55mm | 1.25 × 0.50mm | Galvanized | 5,000 |
| A11/08 | 8mm / 5/16" | 10.55mm | 1.25 × 0.50mm | Galvanized | 5,000 |
| A11/10 | 10mm / 3/8" | 10.55mm | 1.25 × 0.50mm | Galvanized | 5,000 |
| A11/12 | 12mm / 1/2" | 10.55mm | 1.25 × 0.50mm | Galvanized | 5,000 |
| A11/14 | 14mm / 9/16" | 10.55mm | 1.25 × 0.50mm | Galvanized | 5,000 |
| A11/16 | 16mm / 5/8" | 10.55mm | 1.25 × 0.50mm | Galvanized | 5,000 |
| Model | Length | Pcs/Stick | Pcs/Box | Boxes/Carton | Cartons/Pallet |
|---|---|---|---|---|---|
| A11/06 | 6mm / 1/4" | 84 | 5,000 | 20 | 60 |
| A11/08 | 8mm / 5/16" | 84 | 5,000 | 20 | 60 |
| A11/10 | 10mm / 3/8" | 84 | 5,000 | 20 | 60 |
| A11/12 | 12mm / 1/2" | 84 | 5,000 | 20 | 60 |
| A11/14 | 14mm / 9/16" | 84 | 5,000 | 20 | 60 |
| A11/16 | 16mm / 5/8" | 84 | 5,000 | 20 | 60 |
The A11 profile is commonly referenced in the market together with T50-style fine wire staples. Crown descriptions can vary between suppliers, so the nominal crown name alone should not be used to determine interchangeability.
For KYA A11 staples, use the published 10.55mm crown and 1.25mm × 0.50mm wire dimensions when comparing the staple with an existing fastener or tool specification.
KYA identifies the following staple families as similar references for the A11 profile. These references are useful when comparing existing fasteners, but similarity does not guarantee that every length or material configuration fits every tool.
| Reference Series | Selection Note |
|---|---|
| PREBENA PF | Compare crown, wire dimensions and leg length before substitution. |
| DUOFAST A11 | A11 family reference; verify the exact tool and accepted staple length. |
| FASCO A11 | Compare the exact A11 profile and tool specification. |
| SENCO H | Published by KYA as a similar series; verify dimensions and tool model. |
| SPOTNAILS A11 | A11/T50-style reference; verify crown and leg-length acceptance. |
| RAPID 140 | Published reference series; confirm actual fastener dimensions and tool specifications. |
Always check the exact stapler manual for accepted crown profile, gauge, wire dimensions and leg-length range before placing a bulk order.
KYA specifies a chisel point for the A11 series. The point is designed for penetration through compatible upholstery, fabric and light fastening materials.
The staples are glue collated in strips for feeding through compatible staplers. Correct staple dimensions, loading procedure and tool condition all affect feeding performance.
A11 20 gauge fine wire staples are intended for light fastening applications where a relatively narrow wire profile and broad crown are suitable for the material being attached.
Furniture and sofa upholstery
Fabric and vinyl fastening
Automotive trim and headliners
Furniture trim
Screening
Craft and decorative work
Roofing felt
House wrap
Insulation and vapor barrier
Cabinet backs and drawers
Picture frames and molding
Bedding and furniture assembly
KYA publishes steel, stainless steel and aluminum as material options for the A11 series, together with zinc-plated or galvanized surface finishes. Confirm the required material and finish combination for the exact size before ordering.
| Material / Finish | Selection Consideration |
|---|---|
| Galvanized / Zinc-Plated Steel | Published standard configuration for many upholstery, furniture and light fastening applications. |
| Stainless Steel | Published material option where a stainless fastener is required. Confirm the exact grade and size combination before ordering. |
| Aluminum | Published material option for applications requiring an aluminum staple. Confirm the required size and tool compatibility. |
Do not assume every material is available in every leg length or that one finish is suitable for every environment. Specify the required material, finish and size when requesting a quotation.
Select the leg length according to the thickness of the material being fastened and the required penetration into the supporting substrate.
A stapler that accepts the A11 profile may not necessarily accept every 6–16mm length. Verify the exact tool's published leg-length range.
For KYA A11 staples, confirm the 10.55mm crown and 1.25mm × 0.50mm wire profile. Similar series names alone do not guarantee dimensional compatibility.
Specify steel, stainless steel or aluminum and the required surface finish according to the fastening environment and purchase specification.
Required A11 model: A11/06, /08, /10, /12, /14 or /16
Required leg length
Required material: steel, stainless steel or aluminum
Required finish
Required quantity
Stapler brand and exact model
Required crown and wire dimensions
Application and material being fastened
Packaging requirements, if applicable
Delivery destination
Send Your A11 Staple Requirements
KYA identifies the A11 series as 20 gauge fine wire staples.
KYA publishes a 10.55mm crown, commonly described as a nominal 3/8-inch crown.
The published wire profile is 1.25mm wide × 0.50mm thick. KYA also publishes a series designation of 0.88#.
The current published range includes 6mm, 8mm, 10mm, 12mm, 14mm and 16mm, identified as A11/06 through A11/16.
KYA currently uses A1110 as the model name for this product page while listing the complete A11 series. Within the published size chart, A11/10 specifically identifies the 10mm (3/8") leg-length version.
KYA publishes 84 staples per stick for the listed A11 series configurations.
The published quantity is 5,000 staples per box.
A11 and T50 are commonly referenced as similar fine-wire staple profiles, but crown descriptions and dimensions can vary between manufacturers. Confirm the actual staple dimensions and tool specification before treating two products as interchangeable.
KYA lists Rapid 140 as a similar reference series. Confirm the exact Rapid tool model, accepted crown profile and leg-length range before ordering.
Yes, A11 fine wire staples are commonly used for upholstery and furniture fastening when the stapler accepts the required A11 profile and leg length.
KYA publishes steel, stainless steel and aluminum as material options for the A11 series. Confirm the exact material and leg-length combination before ordering.
No. Galvanized or zinc-plated steel provides corrosion protection, but suitability depends on the environment, moisture, substrate and project requirements. Select the material and finish according to the actual installation conditions.
KYA supplies A11 fine wire staples for fastener distributors, upholstery suppliers, furniture manufacturers, workshops and professional users. Send the required leg length, material, finish, tool model, quantity and delivery destination for product confirmation and quotation.
