| Material: | |
|---|---|
| Surface Treatment: | |
| Quantity: | |
KYA 15° Plastic Sheet Concrete Steel Coil Nails 2.5×18mm are #45 high-carbon steel fasteners designed for professional direct-fastening applications involving compatible concrete, steel and wood assemblies.
The featured nail has a 2.5 mm (0.098") shank diameter, 18 mm (0.71") length, 5.0 mm head diameter, screw shank, diamond point and electro-galvanized finish. It is collated in a 15° plastic sheet coil with 300 nails per coil.
The #45 high-carbon steel construction and compact 18 mm length make this specification suitable for applications where a hardened short concrete steel nail is required. Actual suitability depends on the base material, attached component, required penetration and approved fastening tool.
| Parameter | Specification |
|---|---|
| Product Type | Plastic Sheet Collated Concrete Steel Coil Nail |
| Size | 2.5 × 18 mm |
| Shank Diameter | 2.5 mm (0.098") |
| Length | 18 mm (0.71") |
| Head Diameter | 5.0 mm |
| Shank Type | Screw Shank |
| Point Type | Diamond Point |
| Collation | 15° Plastic Sheet |
| Finish | Electro-Galvanized |
| Material | #45 High-Carbon Steel |
| Nails per Coil | 300 |
| Coils per Carton | 40 |
| Tool Requirement | Concrete or direct-fastening nailer specifically rated for 2.5×18mm, 15° plastic-sheet-collated concrete steel nails |
This 2.5×18mm concrete steel nail is made from #45 high-carbon steel. The material is used where higher hardness is required for driving into compatible hard substrates.
The current product specification references the #45 steel electro-galvanized version for applications involving penetration into steel up to 2 mm. Final performance depends on steel hardness, substrate thickness, fastening tool power and installation conditions.
The featured nail uses a diamond point. The pointed geometry concentrates the driving force at the nail tip during installation into compatible substrates.
Concrete strength, aggregate hardness, steel thickness, edge distance and tool driving energy can all affect penetration and fastening performance.
The 2.5×18mm model uses a screw shank. Its helical shank profile is designed to increase mechanical engagement after the nail has been driven into a suitable fastening assembly.
Holding performance varies with the receiving material, embedment depth, fastener geometry and installation conditions. Trial fastening should be carried out when the substrate or application changes.
The featured concrete steel nail has a 5.0 mm head diameter. Head size is an important part of both attachment performance and nailer compatibility because the magazine, feed system and driver must accommodate the complete fastener profile.
The nails are connected in a 15° plastic sheet coil for automatic feeding through a compatible nailer. The plastic carrier maintains nail alignment in the coil and separates as each fastener is driven.
Each coil contains 300 nails, providing a high-capacity format for repetitive fastening work. The exact plastic-sheet geometry must match the magazine and feed system of the fastening tool.
The featured 2.5×18mm concrete steel nail uses a diamond point. KYA's wider coil nail range includes additional point geometries for different fastening requirements.
This product specifically uses a screw shank. Smooth, screw and ring shank configurations are available across the wider KYA coil nail range. Shank type should be selected according to the substrate, fastening requirement and approved tool specification.
The featured concrete steel nail measures 2.5 mm in shank diameter and 18 mm in length. Additional plastic sheet coil nail dimensions are available within the wider KYA product range.
2.5×18mm compact specification: 2.5 mm shank diameter and 18 mm nail length for compatible direct-fastening applications.
#45 high-carbon steel: Hardened steel material intended for suitable concrete and steel fastening applications.
Screw shank: Helical shank profile designed for mechanical engagement after driving.
Diamond point: Concentrates driving force at the nail tip.
15° plastic sheet collation: Holds the nails in coil form for automatic feeding through compatible tools.
Electro-galvanized finish: Zinc-coated surface providing light corrosion resistance.
300 nails per coil: High-capacity coil configuration for repetitive fastening.
40 coils per carton: Standard listed carton packing for this specification.
The 2.5×18mm #45 steel coil nail is intended for professional direct-fastening work where the nail dimensions, tool and substrate are compatible.
Furring strip fastening to compatible concrete or masonry substrates.
Steel-to-wood fastening in suitable framing and assembly applications.
Concrete formwork for suitable temporary fixing applications.
Drywall track fastening involving compatible metal track and base materials.
Electrical and conduit attachments where clips or boxes are fastened using an approved direct-fastening system.
Explore Plastic Sheet Coil Nails
Do not select a fastening tool based only on the 15° collation angle. A compatible concrete nailer must accept the complete fastener specification, including diameter, length, head size, collation material and coil geometry.
| Compatibility Parameter | Required Specification |
|---|---|
| Fastener Type | Concrete Steel Coil Nail |
| Shank Diameter | 2.5 mm (0.098") |
| Length | 18 mm (0.71") |
| Head Diameter | 5.0 mm |
| Collation | 15° Plastic Sheet |
| Shank Type | Screw Shank |
| Point | Diamond Point |
| Tool Type | Concrete or direct-fastening nailer approved for the complete 2.5×18mm plastic-sheet fastener configuration |
When replacing an existing fastener, provide the nailer manufacturer, exact tool model, existing fastener code and physical nail dimensions before ordering.
The featured 2.5×18mm screw-shank model uses #45 high-carbon steel with an electro-galvanized finish. Other finishes and materials are available within the wider KYA plastic sheet coil nail range.
| Finish / Material | Product Range Information |
|---|---|
| Bright | Uncoated finish available within the wider range. |
| Electro-Galvanized | Featured finish for this 2.5×18mm #45 steel model. |
| Hot Dip Galvanized | Available within the broader product range for applications requiring a heavier zinc coating. |
| Stainless Steel 304 / 316 | Available within the broader product range for applications requiring stainless steel material. |
| #45 Steel Electro-Galvanized | Featured material and finish combination for this 2.5×18mm concrete steel nail. |
In addition to this 2.5×18mm screw-shank model, the current product information lists custom nail diameters from approximately 1.60–3.33 mm and lengths from 18–50 mm.
Different lengths and finishes can be produced according to the required fastening application. Provide the required nail diameter, length, head size, shank, material, finish and application when requesting a custom quotation.
| Item | Information |
|---|---|
| Nails per Coil | 300 |
| Coils per Carton | 40 |
| MOQ | 1 pallet |
| Custom Options | Custom length and finish |
| Lead Time | 15–25 days |
The featured product has a 2.5 mm shank diameter, 18 mm nail length and 5.0 mm head diameter.
The featured nail is made from #45 high-carbon steel with an electro-galvanized finish.
This 2.5×18mm product uses a screw shank.
The current specification lists a diamond point.
Each coil contains 300 nails, with 40 coils per carton.
The nails are held together by a plastic carrier in a nominal 15° coil arrangement for automatic feeding through a compatible concrete nailer. The exact plastic-sheet geometry must match the tool.
The product is designed as a concrete steel nail for compatible direct-fastening applications. Suitability depends on the concrete strength, attached material, required embedment and fastening tool.
The current KYA product information references 2 mm steel penetration for the #45 steel electro-galvanized configuration. Actual penetration depends on the steel grade, thickness, tool power and installation conditions.
No. The tool must specifically accept a 2.5 mm diameter, 18 mm long, 5.0 mm head, 15° plastic-sheet-collated concrete steel nail. Do not select a nailer based only on the 15° designation.
The current product information lists custom diameters from approximately 1.60–3.33 mm and lengths from 18–50 mm, together with different finish options.
The currently listed MOQ is 1 pallet.
Provide the required nail diameter, length, head diameter, shank type, point, material, finish, collation, fastening tool model, base material, attached material and purchasing quantity whenever available.
KYA Fasteners has produced industrial fasteners since 2003 and supplies fasteners to customers in more than 50 countries. This featured product combines #45 high-carbon steel, a screw shank, diamond point, electro-galvanized finish and 15° plastic sheet collation.
For specification confirmation or bulk purchasing, provide your required quantity, fastening application, base material and nailer model together with the existing fastener specification when available.
KYA Fasteners, a 20+ year factory, produces 15° plastic sheet collated concrete steel coil nails for steel-to-concrete, steel-to-wood, furring strips. 2.5mm × 18mm, screw shank, electro-galvanized. 300 nails/coil. Fits Max CN55, Hitachi NV45AB2, Bostitch N55CD. Exported to USA, Canada, UK, Australia and 50+ countries.
Plastic sheet — no debris
Screw shank — max hold in concrete
300 nails/coil — high capacity
EG finish — corrosion resistant
Global shipping: USA, EU, AU, CA in 15–25 days
| Parameter | Specification |
|---|---|
| Shank Diameter | 2.5 mm (0.098") |
| Length | 18 mm (0.71") |
| Head Diameter | 5.0 mm |
| Shank Type | Screw |
| Point Type | Diamond |
| Collation | 15° Plastic Sheet |
| Finish | Electro-Galvanized |
| Material | #45 High-Carbon Steel |
| Nails/Coil | 300 |
| Coils/Carton | 40 |
| Compatible Nailers | Max CN55, Hitachi NV45AB2, Bostitch N55CD, Senco SCN45 |
Plastic sheet — zero debris
Screw shank — max hold in concrete
300 nails/coil — less reload
EG finish — corrosion resistant
#45 steel — penetrates 2mm steel
Steel-to-concrete – furring strips
Steel-to-wood – framing
Concrete formwork – temporary fix
Drywall track – metal studs
Electrical boxes – conduit clips
Bright – interior, no coating
Electro Galvanized – light corrosion resistance
Hot Dip Galvanized – exterior, long-term
Stainless Steel 304/316 – marine, max durability
#45 Steel EG – high hardness, 2mm steel penetration
No plastic scraps — cleaner job site, no jamming.
300 nails/coil — less downtime.
Screw shank + #45 steel — penetrates 2mm steel.
1 pallet (40 cartons).
Yes — 1.60–3.33mm, 18–50mm length.
Ask a QuestionSince 2003, KYA Fasteners has produced 15° plastic sheet concrete steel coil nails for steel-to-concrete contractors in USA, Canada, UK, Australia and 50+ countries. #45 steel + screw shank for 2mm steel penetration.
Export: 50+ countries
MOQ: 1 pallet
OEM: Custom length/finish
Lead time: 15–25 days
Need 2.5×18mm concrete steel nails? Get a quote from KYA today.
Contact Us
