| Material: | |
|---|---|
| Surface Treatment: | |
| Quantity: | |
KYA 15° Stainless Steel Plastic Sheet Coil Nails 1.83×16mm are ring-shank collated fasteners designed for professional exterior and high-moisture fastening applications including marine decking, coastal fencing, siding, pressure-treated wood and greenhouse construction.
The featured nail has a 1.83 mm (0.072") shank diameter, 16 mm (0.63") length, 4.5 mm head diameter, ring shank and diamond point. The nails use 15° plastic sheet collation and are available in Stainless Steel 304 / 316.
Each coil contains 300 nails, with 40 coils per carton. The short 16 mm length should be matched carefully to the substrate thickness, required penetration and the exact fastener range of the pneumatic nailer.
| Parameter | Specification |
|---|---|
| Model | 1.83×16mm |
| Product Code | KYA-1.83X16SS |
| Product Type | Stainless Steel Plastic Sheet Coil Nail |
| Shank Diameter | 1.83 mm (0.072") |
| Length | 16 mm (0.63") |
| Head Diameter | 4.5 mm |
| Shank Type | Ring Shank |
| Point Type | Diamond Point |
| Collation | 15° Plastic Sheet |
| Material | Stainless Steel 304 / 316 |
| Nails per Coil | 300 |
| Coils per Carton | 40 |
| Tool Requirement | Nailer specifically rated for the complete 15° plastic-sheet, 1.83×16mm fastener configuration |
The featured coil nail is available in Stainless Steel 304 / 316 for applications where corrosion resistance is important. Stainless steel is suitable for exterior, humid and coastal fastening applications when the selected grade meets the environmental requirements.
The current product information identifies SS316 for saltwater and more aggressive coastal conditions, while SS304 is offered for humid and general exterior environments. Buyers should specify the required stainless steel grade when requesting a quotation.
The 1.83×16mm nail uses a diamond point. The pointed profile supports penetration into compatible wood and construction materials during pneumatic fastening.
Fastening performance depends on wood density, material thickness, required embedment and nailer settings.
The featured product uses a ring shank. Annular rings along the shank increase mechanical engagement with suitable wood fibers and help resist nail back-out compared with a smooth-shank fastener of similar dimensions.
Holding performance varies according to wood species, density, moisture content, penetration depth and application conditions. The fastener specification should be selected according to the required assembly rather than relying on a fixed holding-power percentage.
The featured 1.83×16mm nail has a 4.5 mm head diameter. Head geometry affects seating, attachment performance and tool compatibility, so the complete nail profile should be checked against the intended nailer before ordering.
The nails are assembled in a 15° plastic sheet coil. The plastic carrier maintains fastener alignment for sequential feeding through compatible pneumatic equipment.
Each coil contains 300 nails. Plastic-sheet collation is different from conventional wire-welded collation, so both the carrier type and nail dimensions must match the tool.
The featured 1.83×16mm stainless steel coil nail uses a diamond point. Other point geometries are available within the wider KYA nail range for different fastening requirements.
KYA supplies smooth, ring and screw shank configurations across different coil nail ranges. The product on this page is specifically a 1.83×16mm ring-shank stainless steel coil nail.
The featured nail measures 1.83 mm in shank diameter and 16 mm in length. Additional plastic sheet coil nail dimensions are available within the broader KYA range.
1.83×16mm specification: 1.83 mm shank diameter with 16 mm nail length.
Stainless Steel 304 / 316: Material options for exterior, humid, coastal and marine-related fastening requirements.
Ring shank: Increased resistance to nail back-out in suitable wood materials.
Diamond point: Pointed geometry for penetration into compatible substrates.
4.5 mm head: Compact full round head configuration.
15° plastic sheet collation: Designed for compatible plastic-sheet coil nailers.
300 nails per coil: High-capacity coil arrangement for repetitive fastening.
40 coils per carton: Standard listed carton quantity.
The 1.83×16mm stainless steel ring-shank nail is intended for professional applications where corrosion resistance and secure fastening in compatible wood materials are required.
Marine decking – docks, piers and related high-moisture wood assemblies.
Coastal fencing – fencing exposed to salt air and humid environments.
Humid siding – suitable siding and fiber-cement fastening applications.
Pressure-treated wood – including applications involving ACQ and CCA treated lumber.
Greenhouse framing – fastening applications in high-humidity environments.
Explore Plastic Sheet Coil Nails
A nominal 15° angle alone does not establish nailer compatibility. The pneumatic tool must accept the complete fastener specification, including plastic-sheet collation, nail diameter, nail length and head diameter.
| Compatibility Parameter | This Product |
|---|---|
| Collation Angle | 15° |
| Collation Type | Plastic Sheet |
| Shank Diameter | 1.83 mm (0.072") |
| Nail Length | 16 mm (0.63") |
| Head Diameter | 4.5 mm |
| Shank Type | Ring |
| Tool Requirement | Nailer specifically approved for 15° plastic-sheet nails with the complete 1.83×16mm configuration |
Before purchasing replacement nails, compare these dimensions with the nailer's approved fastener range. Provide the exact nailer manufacturer and model when requesting compatibility confirmation.
The featured 1.83×16mm ring-shank product is offered in Stainless Steel 304 / 316. Other materials and surface treatments are available within the broader KYA coil nail range.
| Material / Finish | Product Range Information |
|---|---|
| Stainless Steel 304 | Available for humid, exterior and general corrosion-resistant fastening requirements. |
| Stainless Steel 316 | Listed for saltwater, coastal and more aggressive corrosion environments. |
| Bright | Available within the wider coil nail range for suitable dry applications. |
| Electro Galvanized | Available within the broader product range for applications requiring light corrosion protection. |
| Hot Dip Galvanized | Available within the broader range for exterior fastening requirements. |
In addition to this 1.83×16mm ring-shank specification, the current product information lists custom nail diameters from approximately 1.60–3.33 mm and lengths from 16–50 mm.
Stainless steel grade and shank configuration can also be discussed according to the required application. Provide the nail dimensions, stainless steel grade, shank, point, collation and application when requesting a custom quotation.
| Item | Information |
|---|---|
| Nails per Coil | 300 |
| Coils per Carton | 40 |
| MOQ | 1 pallet |
| Custom Options | Custom stainless steel grade and shank specification |
| Listed Lead Time | 15–25 days |
The featured nail has a 1.83 mm (0.072") shank diameter, 16 mm (0.63") length and 4.5 mm head diameter.
Yes. The current product specification lists Stainless Steel 304 / 316. Specify the required grade when requesting a quotation.
The current product information identifies SS304 for humid and general corrosion-resistant applications and SS316 for saltwater and more aggressive coastal environments.
The annular rings increase mechanical engagement with suitable wood fibers and help resist nail back-out compared with a smooth-shank fastener of similar dimensions.
Each coil contains 300 nails, with 40 coils per carton.
The product is intended for marine decking, coastal fencing, humid siding and related corrosion-resistant fastening applications. Select SS304 or SS316 according to the service environment and project requirements.
Pressure-treated wood, including ACQ and CCA applications, is listed among the intended uses for this stainless steel coil nail range. Confirm the stainless steel grade and fastener dimensions required by the project.
No. The nailer must accept the complete 15° plastic-sheet, 1.83 mm diameter, 16 mm length and 4.5 mm head configuration. A 15° designation alone does not establish compatibility.
The current product information lists custom diameters from approximately 1.60–3.33 mm and lengths from 16–50 mm, with custom stainless steel grade and shank options.
The currently listed minimum order quantity is 1 pallet.
Provide the required nail diameter, length, head diameter, stainless steel grade, shank type, point, collation type, nailer manufacturer and model, application and purchasing quantity whenever available.
KYA Fasteners has produced industrial fasteners since 2003 and supplies fastening products to customers in more than 50 countries. The featured product combines Stainless Steel 304 / 316, a 1.83×16mm size, ring shank, diamond point and 15° plastic sheet collation.
The current product information lists 300 nails per coil, 40 coils per carton, an MOQ of 1 pallet, custom grade and shank options, and a listed lead time of 15–25 days.
For bulk purchasing or specification confirmation, provide the required stainless steel grade, quantity, application and exact nailer information together with the current fastener specification when available.
