The Eclipser 2000-1234 pneumatic clinch clip tool is a hand-held pneumatic fastening tool designed for animal cages, traps, wire assemblies and smaller wire mesh. The EA2000-1234 model uses 52A14SG collated clips and is suitable for professional production where lighter-gauge wires need fast and repeatable mechanical clinching.
With a net weight of 2.0 kg (4.4 lbs), operating pressure of 80–90 PSI and a lightweight composite housing and magazine, the Eclipser 2000-1234 is designed for repetitive wire fastening. Its quick-release front plate provides convenient driver-blade access, while the curved magazine and constant-force spring support reliable clip feeding.
The Eclipser 2000-1234 is manually triggered and powered by compressed air. It uses a standard clipping head to wrap and press a compatible metal clip around wire components, creating a secure mechanical connection without welding.
52A14SG clip compatibility: Configured for the specified E-Clip used in wire fastening.
Cage and trap applications: Suitable for lighter-gauge wire and smaller mesh assemblies.
80–90 PSI operation: Designed for compatible industrial compressed-air systems.
2.0 kg tool weight: Lightweight construction supports repetitive fastening work.
Quick-release front plate: Allows driver blade access without tools.
Constant-force spring feed: Maintains clip pressure through the curved magazine.
Review the tool specifications before ordering to confirm compatibility with your wire diameter, clip supply, compressed-air system and production requirements.
| Parameter | Specification |
|---|---|
| Model | EA2000-1234 |
| Series | Eclipser 2000 |
| Brand | ENCORE |
| Tool Type | Hand-Held Pneumatic Clinch Clip Tool |
| Clipping Head | Standard Head |
| Dimensions | 178 × 102 × 419 mm |
| Net Weight | 2.0 kg (4.4 lbs) |
| Operating Air Pressure | 80–90 PSI (5.5–6.2 bar) |
| Compatible Clip | 52A14SG |
| Magazine Format | Curved Magazine |
| Magazine Capacity | Up to 50 Clips per Strip |
| Clip Feeding Method | Constant-Force Spring |
| Main Cylinder | 3.06 in (78 mm) Bore, Spring Return |
| Main Material | Hardened Alloy Steel |
| Housing and Magazine | Composite Material |
| Main Applications | Animal Cages, Traps and Wire Assemblies |
| Optional Accessory | Tool Hanger, Sold Separately |
The Eclipser 2000-1234 is designed for 52A14SG clips. This tool and clip combination is used primarily for lighter-gauge wire, cages, traps and smaller wire mesh applications.
Correct clip-to-tool matching is important because Eclipser models with similar external designs may use different clips and clipping heads. For replacement purchases, confirm the existing tool model and clip reference before ordering.
| Compatibility Item | Eclipser 2000-1234 |
|---|---|
| Clip Reference | 52A14SG |
| Primary Industries | Farming, Agriculture, Wire Products |
| Typical Products | Animal Cages, Traps and Wire Assemblies |
| Typical Material | Lighter-Gauge Wire and Smaller Mesh |
| Clip Supply Format | Collated Clip Strips |
| Feature | Function |
|---|---|
| Quick-Release Front Plate | Allows access to the driver blade without requiring tools to remove the front plate. |
| 2.0 kg Tool Weight | Supports easier handling during repetitive cage and wire assembly work. |
| Small Contoured Handle | Designed to improve operator comfort and control. |
| Curved Magazine | Carries collated clips and feeds them toward the clipping head. |
| Constant-Force Spring | Maintains feeding pressure as clips are consumed during operation. |
| Composite Housing | Reduces tool weight while providing a durable exterior housing. |
| Optional Hanger | Available separately for workstation installation. |
The Eclipser 2000-1234 is primarily intended for fastening lighter-gauge wires and smaller mesh. It is particularly suitable for cage and trap manufacturers that need a pneumatic method for repeatedly closing clips around accessible wire intersections.
| Application | Typical Fastening Work |
|---|---|
| Animal Cages | Joining compatible wire and smaller mesh sections during cage production. |
| Animal Traps | Fastening accessible wire intersections during trap assembly. |
| Wire Products | Clinching compatible lighter-gauge wire components. |
| Smaller Wire Mesh | Joining mesh at accessible connection points using compatible 52A14SG clips. |
| Agricultural Wire Products | Assembly of compatible wire structures used in farming and agricultural applications. |
The tool uses compressed air to drive a 52A14SG clip through the clipping head. The clip is formed around the wire components positioned inside the head, creating a mechanical connection.
Connect the tool to a clean compressed-air supply.
Set the operating pressure within the specified 80–90 PSI range.
Load compatible 52A14SG collated clips into the curved magazine.
Position the clipping head around the required wire connection.
Activate the trigger to form the clip around the wire components.
Inspect the finished clinch before beginning continuous production.
Eclipser 2000 tools use different clipping heads and clip sizes for different wire applications. Buyers should confirm the fastener, wire dimensions and required access before choosing a model.
| Check Before Ordering | What to Confirm |
|---|---|
| Tool Model | Confirm EA2000-1234 or the model number of the tool being replaced. |
| Clip Reference | The 2000-1234 is configured for 52A14SG clips. |
| Wire Diameter | Provide the diameter and number of wires being joined. |
| Mesh Size | Confirm available tool access and the size of the wire mesh opening. |
| Application | Identify whether the tool will be used for cages, traps or another wire product. |
| Air Supply | Confirm stable compressed air within the 80–90 PSI range. |
The quick-release front plate provides convenient access to the driver blade for routine inspection and replacement without requiring tools to remove the front plate.
Always disconnect the compressed-air supply and remove clips from the tool before opening the clipping head, clearing a jam or carrying out maintenance.
Operate the tool within the specified 80–90 PSI pressure range.
Use clean and dry compressed air suitable for pneumatic production tools.
Use compatible 52A14SG clips and load them correctly.
Do not use damaged or incorrectly collated clip strips.
Keep the curved magazine and clip feeding path clean.
Inspect the driver blade and clipping head regularly for wear.
Disconnect the air supply and remove clips before clearing jams.
Replace worn components when necessary to maintain consistent fastening.
| Issue | Possible Cause | Recommended Check |
|---|---|---|
| Clip feeding problem | Incorrect or damaged clips | Confirm 52A14SG clips and inspect the magazine. |
| Incomplete clinch | Low air pressure or worn forming components | Check for 80–90 PSI and inspect the driver blade and clipping head. |
| Frequent clip jamming | Damaged clips or contaminated feeding path | Disconnect air, remove clips, clear the jam and clean the magazine. |
| Driver blade wear | Normal production wear | Use the quick-release front plate to access and inspect the driver blade. |
| Air leakage | Loose connection or worn pneumatic seal | Stop operation and inspect pneumatic connections and service components. |
KYA Fasteners supplies clinch clip tools and compatible fastening products for cage manufacturers, trap manufacturers, agricultural wire-product companies, distributors and professional industrial users.
When requesting a quotation, provide the required quantity, destination country, application, wire diameter and clip reference. For replacement purchases, providing the existing tool model or clear identification photos can help confirm compatibility.
The Eclipser 2000-1234 is primarily designed for animal cages, traps and wire applications. It is especially suited to lighter-gauge wire and smaller mesh.
The tool is configured for 52A14SG clips. Confirm the clip reference before ordering because other Eclipser models use different clip sizes.
The specified operating pressure is 80–90 PSI (5.5–6.2 bar).
The tool weighs approximately 2.0 kg (4.4 lbs).
The listed dimensions are 178 × 102 × 419 mm.
The Eclipser 2000-1234 has a listed magazine capacity of up to 50 clips per strip.
Yes. Animal cage production is one of the primary applications specified for this model, particularly where compatible lighter-gauge wire or smaller mesh is used.
Yes. The Eclipser 2000-1234 is specified for trap and wire applications where the standard clipping head has sufficient access to the fastening point.
The quick-release front plate provides access to the driver blade without requiring tools to remove the front plate, simplifying blade inspection and replacement.
Yes. The curved magazine uses a constant-force spring to feed clips toward the clipping head.
Confirm the clip reference, wire diameter, mesh size and available tool access. The 2000-1234 is specifically configured for 52A14SG clips and is primarily intended for cages, traps and lighter-gauge wire applications.
Provide the required quantity, destination country, application, wire diameter and clip reference. For replacement projects, also provide the existing tool model or clear identification photos.
KYA Fasteners has operated since 2003 and exports to more than 50 countries, including the USA, Canada, the UK and Australia. The product listing states a one-year warranty and an MOQ of 50 units. OEM options listed for this product include custom color, logo and packaging.
The stated delivery estimate for the USA, EU, Australia and Canada is 20–30 days. Confirm availability, current lead time, warranty coverage and customization details for the order when requesting a quotation.
