| Length: | |
|---|---|
| Material: | |
| Color: | |
| Quantity: | |
KYA STCR5019 galvanized staples are 20 gauge fine wire staples designed for compatible pneumatic staplers, hand tackers and hammer tackers. The STCR5019 profile has a published 11.6mm crown, 1.25mm wire width and 0.50mm wire thickness.
Available leg lengths include 6mm, 8mm, 10mm, 12mm, 14mm and 16mm. KYA specifies a chisel point, glue collation and galvanized finish, with 84 staples per stick and 5,000 staples per box.
| Parameter | Specification |
|---|---|
| Series | STCR5019 |
| KYA Code | KYA-STCR5019 |
| Gauge | 20 Gauge |
| Fastener Type | Fine Wire Staple |
| Crown | 11.6mm; nominal 7/16" STCR5019 crown designation |
| Wire Width | 1.25mm |
| Wire Thickness | 0.50mm |
| Length Range | 6mm–16mm / 1/4"–5/8" |
| Available Sizes | STCR5019/06, STCR5019/08, STCR5019/10, STCR5019/12, STCR5019/14, STCR5019/16 |
| Point Type | Chisel Point |
| Standard Material | Galvanized Steel |
| Published Material Options | Steel / Stainless Steel / Aluminum |
| Surface Finish | Electrogalvanized / Galvanized |
| Collation | Glue Collated |
| Pcs/Stick | 84 pcs |
| Pcs/Box | 5,000 pcs |
The 7/16" description is the common nominal crown designation used for the STCR5019 profile. For dimensional matching with a fastening tool, use the actual published crown and wire dimensions rather than relying only on the nominal inch description.
All six KYA STCR5019 lengths use the same published crown and wire profile. Carton quantities remain consistent, while the number of cartons per pallet changes with staple length.
| Model | Leg Length | Pcs/Stick | Pcs/Box | Boxes/Carton | Cartons/Pallet |
|---|---|---|---|---|---|
| STCR5019/06 | 6mm / 1/4" | 84 | 5,000 | 20 | 60 |
| STCR5019/08 | 8mm / 5/16" | 84 | 5,000 | 20 | 60 |
| STCR5019/10 | 10mm / 3/8" | 84 | 5,000 | 20 | 60 |
| STCR5019/12 | 12mm / 1/2" | 84 | 5,000 | 20 | 40 |
| STCR5019/14 | 14mm / 9/16" | 84 | 5,000 | 20 | 40 |
| STCR5019/16 | 16mm / 5/8" | 84 | 5,000 | 20 | 40 |
The 16mm / 5/8" model is part of KYA's published STCR5019 range. Some other manufacturers publish shorter maximum leg lengths, so buyers replacing another brand should verify that their exact tool accepts 16mm staples before ordering.
STCR5019 staples are intended for tools that accept the corresponding STCR5019-style staple profile. Common market references include Bostitch STCR5019, Rapid 31, PREBENA FB and other similar staple families.
These names should be treated as cross-reference families rather than universal compatibility guarantees. Before ordering, compare the exact crown, wire dimensions, leg length and tool specification.
| Reference | Selection Note |
|---|---|
| Bostitch STCR5019 | Common industry reference for this staple profile. Confirm the accepted leg length for the exact tool. |
| PREBENA FB | Similar market reference. PREBENA publishes its own dimensional specification, so verify the exact tool and staple dimensions. |
| Rapid 31 | Frequently cross-referenced with STCR5019 products; confirm the specific tacker and accepted staple length. |
| JK 694 | Common industry cross-reference for selected STCR5019-type staples and tools. |
Examples of tools commonly listed in the STCR5019 market include Bostitch H30-8, PC2K, JB600, P6C-8 and T6-8, together with other tools designed around the same staple profile. Always check the current manual for the exact tool model before bulk purchasing.
STCR5019 and PREBENA FB are frequently referenced together in the fastening market, but published dimensions are not necessarily identical between manufacturers.
| Reference | Published Crown Information |
|---|---|
| KYA STCR5019 | 11.6mm crown; nominal 7/16" STCR5019 designation |
| PREBENA FB | Separate manufacturer specification; compare exact dimensions before substitution |
When replacing another brand, use actual crown width, wire profile, leg length and tool requirements as the primary selection criteria rather than assuming that two series names are dimensionally identical.
KYA specifies a chisel point for the STCR5019 series. The point geometry is intended for penetration into compatible upholstery backing, wood substrates and sheet materials.
The staples are glue collated in 84-piece strips. Correct staple profile, leg length, tool loading and tool condition all affect feeding performance.
STCR5019 fine wire staples are used for professional fastening applications where their crown, wire profile and selected leg length match the material and fastening tool.
Furniture and sofa upholstery
Furniture trim
Roofing felt
House wrap
Insulation and vapor barrier
Automotive vinyl and trim
Picture frame backing
Bedding and furniture frames
Molding and decorative work
The standard product described on this page uses a galvanized steel configuration. The coating provides corrosion protection compared with uncoated steel and KYA recommends the galvanized version primarily for interior applications.
For humid, exterior or corrosion-sensitive applications, select the material according to the actual exposure conditions and project requirements rather than assuming that the galvanized configuration is suitable for every environment.
KYA also publishes steel, stainless steel and aluminum as material options associated with the STCR5019 series. Confirm the exact material, leg length and current configuration before ordering because not every material should be assumed to be available in every size.
| Material | Selection Consideration |
|---|---|
| Galvanized Steel | Standard configuration described on this page for compatible interior fastening applications. |
| Stainless Steel | Published material option where stainless fasteners are required. Confirm grade, size and availability. |
| Aluminum | Published material option for selected fastening requirements. Confirm size and tool compatibility. |
Select the staple leg length according to the thickness of the material being fastened and the required penetration into the supporting substrate.
Not every STCR5019 tool necessarily accepts every KYA leg length from 6mm through 16mm. Check the exact stapler or tacker specification before selecting a size.
KYA publishes an 11.6mm crown with a 1.25mm × 0.50mm wire profile. Compare these dimensions with the fastener requirements of the tool being used.
Specify the required material and finish based on the installation environment. If stainless steel or aluminum is required, confirm the exact size and material specification when requesting a quotation.
Required STCR5019 model and leg length
Required material and finish
Required quantity
Stapler or tacker brand and exact model
Required crown and wire dimensions
Application and material being fastened
Packaging requirements, if applicable
Delivery destination
Send Your STCR5019 Requirements
KYA identifies the STCR5019 series as 20 gauge fine wire staples.
KYA publishes an 11.6mm crown. STCR5019 staples are commonly marketed under a nominal 7/16-inch crown designation.
No. The 7/16" description is a nominal STCR5019 series designation rather than an exact conversion of the published 11.6mm KYA crown dimension. Use the actual dimensions when checking tool compatibility.
KYA publishes a wire profile of 1.25mm wide × 0.50mm thick.
KYA publishes 6mm, 8mm, 10mm, 12mm, 14mm and 16mm leg lengths.
The published KYA packing specification is 84 staples per stick.
All six listed KYA sizes are published at 5,000 staples per box.
They are commonly used as cross-reference families, but manufacturer dimensions can differ slightly. Compare crown width, wire dimensions, leg length and tool specifications before treating them as interchangeable.
Several Bostitch tools are published for STCR5019-type staples, including selected H30-8, PC2K, JB600, P6C-8 and T6-8 models. Confirm the accepted leg length and current tool specification before ordering.
No. KYA publishes a 16mm STCR5019 staple, but some other STCR5019 tools and brands publish shorter maximum leg lengths. Check the exact tool's accepted fastener range before ordering 16mm staples.
KYA recommends the galvanized configuration primarily for interior applications. For humid, exterior or corrosion-sensitive environments, specify the required material and corrosion resistance before ordering.
KYA publishes stainless steel as an available material option for the STCR5019 series. Confirm the required leg length, stainless steel grade and current availability when requesting a quotation.
Typical applications include upholstery, furniture trim, roofing felt, house wrap, insulation, automotive trim, picture frame backing, bedding and other compatible light fastening work.
KYA also supplies additional fine wire staple profiles for upholstery, furniture, packaging and construction-related fastening applications. Compare crown, gauge, wire profile and leg length when selecting an alternative series.
KYA supplies STCR5019 staples for fastener distributors, upholstery suppliers, furniture manufacturers, construction-material suppliers and professional users. Send the required staple length, material, tool model, quantity and delivery destination for product confirmation and quotation.
