| Length: | |
|---|---|
| Material: | |
| Color: | |
| Quantity: | |
KYA 8010 / 80-10 Fine Wire Staples are 21 gauge upholstery staples with a 12.8mm / 1/2 inch crown and 10mm / 3/8 inch leg length. They are designed for fastening fabric, upholstery, furniture components, screening, insulation, roofing felt and other thin or flexible materials with compatible 80 Series staplers.
The 8010 uses a nominal 0.90mm wire width × 0.70mm wire thickness, chisel point and galvanized / zinc-plated finish. Each strip contains 125 staples, with 10,000 staples per box.
The 10mm leg length is a common choice for upholstery and light fastening where the material stack requires more penetration than shorter 6mm or 8mm staples but does not require the deeper penetration of 12mm, 14mm or 16mm staples.
| Specification | 8010 Details |
|---|---|
| Model | 8010 / 80-10 |
| KYA Code | KYA-8010 |
| Fastener Type | Fine Wire Staple / Upholstery Staple / 80 Series Staple |
| Gauge | 21 Gauge |
| Crown | 12.8mm / 1/2 in. |
| Leg Length | 10mm / 3/8 in. |
| Wire Width | 0.90mm / approximately .036 in. |
| Wire Thickness | 0.70mm / approximately .028 in. |
| Point Type | Chisel Point |
| Standard Finish | Galvanized / Zinc Plated |
| Collation | Glue-Collated Strip |
| Staples per Stick | 125 pcs |
| Staples per Box | 10,000 pcs |
| Material Options | Galvanized Wire, Stainless Steel, Aluminum |
| Main Applications | Upholstery, Furniture, Fabric, Screening, Insulation, Roofing Felt, Automotive Interior Trim, Cabinet Backs and Crafts |
Important: 8010 identifies the 10mm / 3/8-inch leg version of the 80 Series. The wider 80 Series includes other leg lengths from 4mm to 16mm, but those dimensions should not be presented as the specification of this individual SKU.
Request 8010 Staple PricingThe 21 gauge wire profile creates a relatively small fastening mark compared with heavier staple types, making 80 Series staples useful where appearance and reduced material damage are important.
The 12.8mm / 1/2-inch crown distributes holding force across a wider area of fabric, felt, mesh, foam or thin sheet material and helps reduce localized tearing compared with narrower-crown fasteners in suitable applications.
The 10mm leg provides a mid-range option within the 80 Series. It is commonly selected where 6mm or 8mm staples are too short but 12mm or longer staples would provide unnecessary penetration.
The chisel point assists penetration into suitable fabric-backed wood, upholstery frames, felt, insulation and other light fastening substrates.
Staples are aligned in strips for consistent feeding through compatible pneumatic or manual 80 Series staplers. Tool condition, magazine geometry and staple dimensions all affect feeding reliability.
8010 staples are suitable for attaching upholstery fabric, backing material, dust covers and selected foam or textile layers to compatible wood furniture frames.
Fine wire staples can be used in selected automotive trim, seat and interior-panel applications where the staple size and receiving substrate are appropriate.
The wide 12.8mm crown is useful for fastening suitable screen mesh and similar thin materials to wood frames without concentrating all holding force in a narrow area.
80 Series staples can be used for selected roofing felt, membrane and house-wrap fastening where the material manufacturer and project specification permit fine wire staples.
Fine wire staples can secure selected insulation facings, vapor barriers and flexible sheet materials to suitable wood substrates.
The 8010 can also be used for appropriate cabinet backs, drawer components, light trim and craft assemblies where 10mm penetration is suitable.
The wider KYA 80 Series includes leg lengths from 4mm to 16mm. All use the same 12.8mm crown family, while the required leg length should be selected according to the material stack and receiving substrate.
| Item | Leg Length | Crown | Pcs / Stick | Pcs / Box |
|---|---|---|---|---|
| 80/04 | 4mm / 5/32" | 12.8mm / 1/2" | 125 | 10,000 |
| 80/06 | 6mm / 1/4" | 12.8mm / 1/2" | 125 | 10,000 |
| 80/08 | 8mm / 5/16" | 12.8mm / 1/2" | 125 | 10,000 |
| 80/10 / 8010 | 10mm / 3/8" | 12.8mm / 1/2" | 125 | 10,000 |
| 80/12 | 12mm / 1/2" | 12.8mm / 1/2" | 125 | 10,000 |
| 80/14 | 14mm / 9/16" | 12.8mm / 1/2" | 125 | 10,000 |
| 80/16 | 16mm / 5/8" | 12.8mm / 1/2" | 125 | 10,000 |
| Leg Length | General Selection Consideration |
|---|---|
| 4–6mm | Very thin fabrics, liners and light materials where minimal penetration is required |
| 8mm | Light upholstery, fabric and thin material stacks |
| 10mm / 8010 | General upholstery, furniture fabric, screening, felt and light assembly |
| 12–16mm | Thicker material stacks or applications requiring deeper penetration into suitable substrates |
These are general selection guidelines only. The correct leg length depends on fabric thickness, backing layers, foam, substrate density and the fastening depth required by the application.
| Material | General Characteristic | Typical Selection |
|---|---|---|
| Galvanized / Zinc-Plated Steel | General corrosion protection | Indoor upholstery, furniture, screening, insulation and general production |
| Stainless Steel | Higher corrosion resistance | Humid or corrosion-sensitive applications where stainless is specified |
| Aluminum | Lightweight and non-ferrous | Special applications requiring aluminum staples |
Material availability can vary by staple length and production configuration. Confirm the required material for the exact 8010 specification when requesting a quotation.
KYA currently cross-references the 80 Series with tool families including PREBENA A, BeA 80, SENCO AT, BOSTITCH 86/AZ33, DUOFAST 301, FASCO 80, OMER 80, HAUBOLD 800 and HOLZHER K.
These references should be treated as compatibility families rather than a guarantee that every model accepts every 80 Series length. Verify the stapler's required crown, wire cross-section, leg-length range and magazine geometry before bulk purchasing.
| Ordering Information | Required Detail |
|---|---|
| Model | 8010 / 80-10 |
| Gauge | 21 Gauge |
| Crown | 12.8mm / 1/2 in. |
| Leg Length | 10mm / 3/8 in. |
| Material | Specify galvanized, stainless steel or aluminum |
| Stapler Model | Provide exact brand and model for compatibility confirmation |
| Application | Upholstery, fabric, screening, insulation, felt, furniture or other use |
| Quantity | Boxes, cartons, pallets or annual purchasing volume |
| Packaging | Standard or OEM/private-label requirements |
The KYA 8010 / 80-10 is a 21 gauge staple with a 12.8mm / 1/2-inch crown and 10mm / 3/8-inch leg length.
Typical applications include furniture upholstery, sofa manufacturing, fabric fastening, automotive trim, screening, insulation, roofing felt, cabinet backs, crafts and other light fastening work.
“80” identifies the staple family and “10” identifies the nominal 10mm leg length. KYA also uses the product model 8010 for this configuration.
The current KYA specification lists a 12.8mm / 1/2-inch crown.
KYA's current specification lists approximately 0.90mm wire width × 0.70mm wire thickness. When replacing another supplier's 80 Series staple, compare the exact wire cross-section as well as the crown and leg length.
The current KYA packing specification lists 125 staples per stick.
The standard KYA specification lists 10,000 staples per box.
Yes. Upholstery and furniture production are core applications for 21 gauge 80 Series fine wire staples because the fine wire profile and wide crown are well suited to fastening fabric and other flexible materials to suitable substrates.
10mm is a common general-purpose upholstery length, but the correct size depends on the fabric, padding, backing layers and receiving wood. Test the staple in the actual assembly before production use.
Both belong to the same 80 Series and use the same 12.8mm crown family. The main difference is leg length: 8010 is 10mm, while 80/12 is 12mm.
KYA cross-references 80 Series staples with PREBENA A, BeA 80, SENCO AT, BOSTITCH 86/AZ33, DUOFAST 301, FASCO 80, OMER 80, HAUBOLD 800 and HOLZHER K tool families. Verify the exact stapler model before ordering.
No. The same nominal crown width does not guarantee compatibility. Gauge, wire width, wire thickness, leg length, collation and magazine geometry must also match the stapler specification.
KYA lists stainless steel as a material option within the 80 Series. Confirm availability for the exact 10mm leg configuration when requesting a quotation.
Yes, aluminum is listed as another material option within the KYA 80 Series. Exact size availability should be confirmed before ordering.
Contact KYA Fasteners regarding current sample availability. For production evaluation, test the staples with the actual stapler, fabric and substrate before bulk purchasing.
Ask About 8010 Fine Wire StaplesKYA supplies 80 Series fine wire staples for upholstery factories, furniture manufacturers, automotive interior suppliers, cabinet makers, insulation contractors, fastener distributors and pneumatic-tool distributors.
For quotations on 21 gauge 8010 / 80-10 fine wire staples, provide the required material, stapler model, quantity, application, packaging and destination market.
Request a Bulk Quote View Full 80 Series
