| Material: | |
|---|---|
| Surface Treatment: | |
| Quantity: | |
KYA 15° Plastic Sheet Concrete Steel Coil Nails 2.6×25mm are #45 high-carbon steel fasteners designed for professional direct-fastening applications involving compatible concrete, steel, wood and metal track assemblies.
This specification features a 2.6 mm (0.102") shank diameter, 25 mm (1") length, 5.2 mm head diameter, smooth shank, diamond point and electro-galvanized finish. The nails are collated in a 15° plastic sheet coil with 300 nails per coil.
The combination of #45 high-carbon steel, a compact 25 mm length and smooth-shank construction is intended for compatible direct-fastening work where fast driving and hardened steel fasteners are required. Actual fastening performance depends on the substrate, attached material, embedment depth and fastening tool.
| Parameter | Specification |
|---|---|
| Model | 2.6×25mm |
| Product Code | KYA-2.6X25SM |
| Product Type | Plastic Sheet Collated Concrete Steel Coil Nail |
| Shank Diameter | 2.6 mm (0.102") |
| Length | 25 mm (1") |
| Head Diameter | 5.2 mm |
| Shank Type | Smooth |
| Point Type | Diamond |
| Collation | 15° Plastic Sheet |
| Finish | Electro-Galvanized |
| Material | #45 High-Carbon Steel |
| Nails per Coil | 300 |
| Coils per Carton | 40 |
| Tool Requirement | Direct-fastening or concrete nailer specifically rated for 2.6×25mm, 15° plastic-sheet-collated concrete steel nails |
The featured 2.6×25mm nail is manufactured from #45 high-carbon steel. This material is used for hardened fastening applications where the nail must be driven into compatible concrete, masonry, steel or composite assemblies.
The current product information references penetration into steel up to 2 mm for the #45 steel configuration. Actual penetration capability depends on steel grade and hardness, tool driving energy, substrate support and installation conditions.
The 2.6×25mm concrete steel nail uses a diamond point. The pointed geometry concentrates the driving force at the tip of the nail during installation into compatible base materials.
Concrete strength, aggregate hardness, steel thickness, edge distance, fastener embedment and tool power can all affect penetration and final fastening performance.
This model uses a smooth shank. The straight shank profile is designed for direct driving through compatible attached components and into the approved base material.
The smooth-shank configuration differs from screw and ring shanks. Selection should be based on the required fastening system, substrate and installation specification rather than substituting one shank style for another without verification.
The featured nail has a 5.2 mm head diameter. Head diameter is an important part of both attachment performance and tool compatibility because the magazine, feed mechanism and driver must accommodate the complete nail geometry.
The concrete steel nails are collated in a 15° plastic sheet coil. The carrier holds the nails in position for automatic feeding through a compatible direct-fastening nailer.
Each coil contains 300 nails. The plastic-sheet configuration, nail diameter, nail length, head dimensions and feed geometry must all match the fastening tool used on the job.
The featured 2.6×25mm concrete steel nail uses a diamond point. The wider KYA coil nail range includes additional point profiles for other fastening requirements.
KYA supplies smooth, screw and ring shank configurations across different coil nail product ranges. The product described on this page is specifically a 2.6×25mm smooth-shank concrete steel nail.
Different shank profiles should not be treated as interchangeable without confirming the fastening application and tool specification.
The featured concrete steel nail measures 2.6 mm in shank diameter and 25 mm in length. Additional plastic sheet coil nail dimensions are available within the wider KYA product range for different fastening requirements.
The 2.6×25mm #45 steel nail is intended for professional direct-fastening applications where the complete fastener specification, base material and fastening tool are compatible.
Explore Plastic Sheet Coil Nails
A nominal 15° angle alone does not establish tool compatibility. Different 15° and 16° coil nailers can use different collation materials, fastener diameters, lengths, head dimensions and feed systems.
| Compatibility Parameter | This Product |
|---|---|
| Fastener Type | Concrete Steel Coil Nail |
| Shank Diameter | 2.6 mm (0.102") |
| Nail Length | 25 mm (1") |
| Head Diameter | 5.2 mm |
| Shank | Smooth |
| Point | Diamond |
| Collation | 15° Plastic Sheet |
| Material | #45 High-Carbon Steel |
| Tool Requirement | Direct-fastening tool specifically approved for the complete 2.6×25mm plastic-sheet fastener configuration |
Before ordering, compare the fastener requirements in the tool manufacturer's manual. When replacing an existing fastener, provide the exact nailer manufacturer, tool model, existing fastener code and physical nail dimensions.
The featured 2.6×25mm smooth-shank model uses #45 high-carbon steel with an electro-galvanized finish. Additional finishes and materials are available within the wider KYA coil nail range.
| Finish / Material | Product Range Information |
|---|---|
| Bright | Uncoated option available within the wider product range. |
| Electro-Galvanized | Featured finish for this 2.6×25mm product, providing light corrosion resistance. |
| Hot Dip Galvanized | Available within the broader product range for applications requiring a heavier galvanized coating. |
| Stainless Steel 304 / 316 | Available within the wider range for applications requiring stainless steel material. |
| #45 Steel Electro-Galvanized | Featured material and finish combination for this 2.6×25mm concrete steel nail. |
In addition to the featured 2.6×25mm smooth-shank specification, the current product range lists custom nail diameters from approximately 1.60–3.33 mm and nail lengths from 18–50 mm.
Different lengths and finishes can be discussed according to the required fastening application. Provide the nail diameter, length, head size, shank type, material, finish and application when requesting a custom specification.
| Item | Information |
|---|---|
| Nails per Coil | 300 |
| Coils per Carton | 40 |
| MOQ | 1 pallet |
| Custom Options | Custom length and finish |
| Lead Time | 15–25 days |
This model has a 2.6 mm (0.102") shank diameter, 25 mm (1") length and 5.2 mm head diameter.
The featured nail is made from #45 high-carbon steel with an electro-galvanized finish.
This 2.6×25mm model uses a smooth shank.
The product specification lists a diamond point.
The featured product uses an electro-galvanized finish.
Each coil contains 300 nails, with 40 coils per carton.
It is designed as a concrete steel nail for compatible direct-fastening applications. Suitability depends on the concrete or masonry strength, attached material, required embedment and fastening tool.
The current product information references 2 mm steel penetration for the #45 steel configuration. Actual penetration depends on steel grade, hardness, thickness, tool driving energy and installation conditions.
No. The nailer must accept the complete 2.6 mm diameter, 25 mm length, 5.2 mm head and 15° plastic-sheet collation specification. A 15° designation by itself does not establish compatibility.
The product is intended for compatible steel-to-concrete fastening, furring strips, drywall track, formwork, framing and attachment of suitable clips or electrical components.
The current product range lists custom diameters from approximately 1.60–3.33 mm and lengths from 18–50 mm, with different finish options available according to the required specification.
The currently listed minimum order quantity is 1 pallet.
Provide the required nail diameter, length, head diameter, shank type, point, material, finish, collation, nailer manufacturer and model, base material, attached component and purchasing quantity whenever available.
KYA Fasteners has produced industrial fasteners since 2003 and supplies fastening products to customers in more than 50 countries. This featured product combines #45 high-carbon steel, a smooth shank, diamond point, electro-galvanized finish and 15° plastic sheet collation.
For bulk purchasing or specification confirmation, provide your required quantity, fastening application, base material and exact fastening-tool information together with the existing fastener specification when available.
KYA Fasteners, a 20+ year factory, produces 15° plastic sheet collated concrete steel coil nails for steel-to-concrete, furring strips, drywall track. 2.6mm × 25mm, smooth shank, electro-galvanized. 300 nails/coil. Fits Max CN55, Hitachi NV45AB2, Bostitch N55CD. Exported to USA, Canada, UK, Australia and 50+ countries.
Plastic sheet — no debris
Smooth shank — fast drive
300 nails/coil — high capacity
EG finish — corrosion resistant
Global shipping: USA, EU, AU, CA in 15–25 days
| Parameter | Specification |
|---|---|
| Shank Diameter | 2.6 mm (0.102") |
| Length | 25 mm (1") |
| Head Diameter | 5.2 mm |
| Shank Type | Smooth |
| Point Type | Diamond |
| Collation | 15° Plastic Sheet |
| Finish | Electro-Galvanized |
| Material | #45 High-Carbon Steel |
| Nails/Coil | 300 |
| Coils/Carton | 40 |
| Compatible Nailers | Max CN55, Hitachi NV45AB2, Bostitch N55CD, Senco SCN45 |
Plastic sheet — zero debris
Smooth shank — fast drive
300 nails/coil — less reload
EG finish — corrosion resistant
#45 steel — penetrates 2mm steel
Steel-to-concrete – furring strips
Steel-to-wood – framing
Concrete formwork – temporary fix
Drywall track – metal studs
Electrical boxes – conduit clips
Bright – interior, no coating
Electro Galvanized – light corrosion resistance
Hot Dip Galvanized – exterior, long-term
Stainless Steel 304/316 – marine, max durability
#45 Steel EG – high hardness, 2mm steel penetration
No plastic scraps — cleaner job site, no jamming.
300 nails/coil — less downtime.
Smooth shank + #45 steel — penetrates 2mm steel.
1 pallet (40 cartons).
Yes — 1.60–3.33mm, 18–50mm length.
Ask a QuestionSince 2003, KYA Fasteners has produced 15° plastic sheet concrete steel coil nails for steel-to-concrete contractors in USA, Canada, UK, Australia and 50+ countries. #45 steel + smooth shank for 2mm steel penetration.
Export: 50+ countries
MOQ: 1 pallet
OEM: Custom length/finish
Lead time: 15–25 days
Need 2.6×25mm concrete steel nails? Get a quote from KYA today.
Contact Us
