| Material: | |
|---|---|
| Finish: | |
| Point: | |
| Quantity: | |
KYA 516SS100 stainless steel hog rings are 16 gauge collated C-rings with a nominal 1/2-inch open size, approximately 1.6mm wire diameter, 8.5mm ring height and sharp points. The featured configuration is manufactured from SS304 stainless steel for fastening applications involving wire, mesh, netting, fabric, cord and related materials.
The sharp-point configuration is designed for applications where the ring may need to penetrate suitable fabric, netting or other soft material before being formed around the assembly. Common uses include cages, traps, mesh bags, cargo netting, upholstery, insulation products, rope and cord fastening.
KYA lists 100 rings per collated strip and 10,000 rings per box for the 516SS100. The current KYA specification lists a 1/8-inch closed diameter, but the actual finished closure depends on the pneumatic tool nose and forming jaws. Compatible 516-series tools can form the same ring to different closed diameters.
| Product Type | Collated C-Style Hog Ring / C-Ring Fastener |
| Model | 516SS100 |
| KYA Code | KYA-516SS100 |
| Gauge | 16 Gauge |
| Wire Diameter | Approximately 1.60mm |
| Open C-Ring Size | 1/2" / approximately 12.7mm |
| Ring Height | Approximately 8.5mm |
| KYA Listed Closed Diameter | 1/8" / approximately 3.2mm; finished closure depends on the tool configuration |
| Material | SS304 Stainless Steel |
| Point Type | Sharp Point |
| Collation | Collated Strip / Glue Collated |
| Rings per Strip | 100 pcs |
| Rings per Box | 10,000 pcs |
| Published Box Weight | Approximately 9 lbs |
| Reference Tool Class | 16GA pneumatic tools designed for 1/2" 516-series C-rings |
| Primary Applications | Caging, traps, mesh bags, netting, upholstery, insulation, cargo nets, rope and cord fastening |
The 516SS100 belongs to the 16 gauge 516-series C-ring system. During installation, the collated ring is fed into a compatible pneumatic tool, positioned around the material being joined and formed into a closed C-shaped connection by the tool jaws.
Because the C-ring is formed around the assembly rather than driven like a conventional staple, the open ring size, wire diameter, ring height, point type, tool magazine and finished closure all need to match the production process.
The 516SS100 uses approximately 1.6mm wire. Wire diameter is an important compatibility parameter because the tool magazine, feeder and forming jaws are designed for a defined fastener series.
The open ring size is approximately 1/2" / 12.7mm. This compact C-ring format is intended for assemblies requiring a smaller finished loop than larger 11/16" or 3/4" C-ring systems.
KYA currently lists an approximately 8.5mm ring height. When replacing another brand, open size alone is not enough; compare ring height, wire diameter and collation geometry as well.
The 516SS100 is the sharp-point stainless version of the 516 series. Sharp points are useful where the fastening process requires the C-ring to penetrate suitable fabric, mesh, netting or other soft material before being formed.
Where intentional piercing is not required, the related 516SS100B blunt-point configuration may be more appropriate.
The featured KYA 516SS100 is manufactured from SS304 stainless steel. Stainless steel provides greater corrosion resistance than ordinary uncoated carbon steel and is useful for suitable exterior, humid and corrosion-sensitive applications.
SS304 should not be described as completely rust-proof in every environment. Salt concentration, chemicals, temperature, crevices, dissimilar metals and long-term exposure can affect corrosion performance.
KYA lists 100 rings per strip and 10,000 rings per box for the stainless 516 series, providing a production-oriented collated format for compatible pneumatic C-ring tools.
516SS100 and 516SS100B share the same general 16 gauge, 1/2-inch stainless C-ring size class. The primary distinction is point type.
| Specification | 516SS100 | 516SS100B |
|---|---|---|
| Gauge | 16GA | 16GA |
| Wire Diameter | Approximately 1.6mm | Approximately 1.6mm |
| Open Size | 1/2" | 1/2" |
| Material | Stainless Steel | Stainless Steel |
| Point | Sharp | Blunt |
| Strip Size | 100 rings | 100 rings |
| Box Quantity | 10,000 rings | 10,000 rings |
| Typical Selection | Applications where material penetration is required | Applications where the ring primarily closes around the joined components |
| Point Type | Selection Guidance |
|---|---|
| Sharp Point | Useful where the C-ring needs to pierce suitable fabric, mesh, netting, insulation covering or another penetrable material before closing. |
| Blunt Point | Useful where intentional piercing is not required and the ring primarily closes around wire, cord, rope or another component. |
The blunt version should not simply be described as "safer" in every application. Point selection should follow the materials, tool setup and fastening process.
The featured 516SS100 is the stainless steel sharp-point configuration. KYA lists additional material and point combinations in the same 516 size family.
| Part Number | Material / Finish | Point | Strip | Box |
|---|---|---|---|---|
| 516G100 | Galvanized Steel | Sharp | 100 | 10,000 |
| 516G100B | Galvanized Steel | Blunt | 100 | 10,000 |
| 516GF100 | Galfan / Zn-Al Coated Steel | Sharp | 100 | 10,000 |
| 516SS100 | SS304 Stainless Steel | Sharp | 100 | 10,000 |
| 516SS100B | Stainless Steel | Blunt | 100 | 10,000 |
| 516AL100 | Aluminum | Sharp | 100 | 10,000 |
| 516AL100B | Aluminum | Blunt | 100 | 10,000 |
These are separate purchasing configurations. Galvanized, Galfan, stainless steel and aluminum should not be presented as finishes of the same exact 516SS100 SKU.
The compact 1/2-inch C-ring format is used where wire, mesh, fabric, cord or related materials need to be joined with a relatively tight finished loop.
Wire cages and animal enclosures
Lobster and crab-pot components
Bait bags and mesh bags
Cargo nets
Bird and garden netting
Wire and plastic mesh joining
Insulation blankets and insulation fastening
Rope and bungee-loop forming
Electrical cord strain-relief assemblies
Selected upholstery and fabric fastening
Nursery, landscaping and erosion-control products
The ring should be selected according to the combined material diameter and the finished closure produced by the tool. Do not assume that every 1/2-inch C-ring is suitable for every mesh, rope or wire combination.
Stainless 516-series rings are used in trap, cage and netting applications where improved corrosion resistance is required. Bostitch specifically lists lobster pots, bait bags, caging and cargo nets among the applications for its equivalent 516SS100 stainless C-ring.
SS304 provides useful corrosion resistance for many wet environments, but it should not be described as immune to saltwater corrosion. Continuous seawater exposure, chlorides and crevice conditions can require a different stainless grade or fastening specification.
The small open C-ring is suitable for selected welded wire, plastic mesh, bird netting, cargo netting and cage assemblies where the joined materials fit within the closure range of the selected tool.
For chain-link fencing, heavy structural mesh or other load-sensitive assemblies, verify the approved fastener size and closure rather than assuming that a 16GA 1/2-inch C-ring is suitable for every fence system.
The most reliable cross-reference for 516SS100 is a pneumatic tool specifically designed for 16 gauge 1/2-inch 516-series C-rings. Tool model matters because different noses can form the same ring to different closed diameters.
| Reference Tool | Published Ring / Closure | 516SS100 Guidance |
|---|---|---|
| Bostitch SC760B | 16GA 1/2" open C-ring; approximately 1/8" closed | Bostitch officially lists RING516SS100 as compatible; closest reference to KYA's listed 1/8" closure |
| Bostitch SC761B | 16GA 1/2" open C-ring; approximately 3/16" closed | Bostitch officially lists the same RING516SS100; demonstrates that finished closure depends on the tool nose |
| HC516-Type Tool | 516-series 16GA C-rings; published around 1/2" open / 3/16" closed | Relevant 516-series tool reference; confirm magazine and closure requirement |
| KYA C760 / SC760 Reference | KYA lists C760 and SC760 for its 516SS100 | Confirm the exact model and required closed diameter before ordering |
| Other 16GA C-Ring Tools | Varies by manufacturer | Must match the 516-series ring dimensions, strip geometry, wire diameter and forming jaws |
Do not state that 516SS100 fits every 1/2-inch hog ring plier or every C7-type tool. Some C7 tools are designed for larger 3/4-inch rings and are not part of the 516 system.
KYA currently lists a 1/8-inch / approximately 3.2mm closed diameter for the 516SS100. This is an appropriate reference for a tool configured to form the ring to that size.
However, the same 516SS100-type ring can be used with different forming tools. Bostitch specifies the RING516SS100 for both SC760B and SC761B: SC760B produces an approximately 1/8-inch closure, while SC761B produces an approximately 3/16-inch closure.
| Tool / Reference | Open Ring | Published Closed Size |
|---|---|---|
| KYA Product Reference | 1/2" | 1/8" listed |
| Bostitch SC760B | 1/2" | 1/8" |
| Bostitch SC761B | 1/2" | 3/16" |
For production purchasing, specify the required finished closure together with the tool model. Ring part number alone does not fully define the final loop diameter after installation.
KYA offers several 16 gauge C-ring size classes. The 516 series is the compact 1/2-inch family and should not be confused with larger 11/16-inch or 3/4-inch systems.
| C-Ring Class | Typical KYA Reference | Wire | General Use |
|---|---|---|---|
| 1/2" | 516 Series | 16GA / 1.6mm | Compact mesh, cages, traps, cord and netting connections |
| 11/16" | 616 Series | 16GA / 1.6mm | Larger bundles and assemblies requiring a wider open ring |
| 3/4" | 16110 Series | 16GA / 1.6mm | Upholstery, bedding, automotive seating and larger wire/cord assemblies |
Do not choose a larger C-ring solely to obtain more holding strength. The open size and finished closure must match the combined diameter and compressibility of the components being joined.
| Material / Finish | General Selection Guidance |
|---|---|
| Galvanized Steel | 516G100 / 516G100B family for applications where the galvanized coating meets the service environment |
| Galfan / Zn-Al Coated Steel | 516GF100 option where zinc-aluminum coating is specified |
| SS304 Stainless Steel | Featured 516SS100 configuration for applications requiring stainless steel corrosion resistance |
| Aluminum | 516AL100 family for applications requiring an aluminum C-ring |
Material selection should consider moisture, chlorides, chemicals, contact materials and expected service life. Stainless steel should not automatically be treated as the correct choice for every environment.
| Part Number | 516SS100 |
| Gauge | 16 Gauge |
| Wire Diameter | Approximately 1.60mm |
| Open Size | 1/2" / approximately 12.7mm |
| Ring Height | Approximately 8.5mm |
| Material | SS304 Stainless Steel |
| Point | Sharp |
| Collation | Collated Strip / Glue Collated |
| Strip Size | 100 rings |
| Box Quantity | 10,000 rings |
| Required Tool Information | Tool manufacturer, exact model and required finished closure |
| Required Application Information | Wire, mesh, netting, fabric, rope or cord dimensions and service environment |
For accurate quotation and compatibility checking, provide the required quantity, exact C-ring tool manufacturer and model, desired finished closure, materials being joined, application, exposure environment and delivery destination.
For the exact product shown on this page, specify KYA-516SS100, 16 gauge, approximately 1.6mm wire, 1/2-inch open C-ring, 8.5mm height, SS304 stainless steel and sharp point.
Custom finishes and packaging are available on request. The listing gives a 20–30 day shipping lead time and states exports to the USA, Germany, Australia, Canada and more than 50 countries. Confirm the current schedule, minimum order, selected finish, package details and delivery destination when requesting a quotation.
| KYA Code | KYA-516SS100 |
| Gauge | 16 Gauge |
| Wire | Approximately 1.60mm |
| Open Size | 1/2" / approximately 12.7mm |
| Height | Approximately 8.5mm |
| Material | SS304 Stainless Steel |
| Point | Sharp |
| Strip | 100 rings |
| Packing | 10,000 rings / box |
| Published Box Weight | Approximately 9 lbs |
| Inquiry Information | Quantity, tool model, closure, application, joined material and delivery destination |
The 516SS100 is a 16 gauge C-ring with approximately 1.6mm wire, a nominal 1/2-inch / 12.7mm open size and approximately 8.5mm ring height.
KYA identifies the featured 516SS100 configuration as SS304 stainless steel.
516SS100 is the sharp-point stainless configuration. The related 516SS100B uses blunt points.
Both are 16GA 1/2-inch stainless C-rings. 516SS100 has sharp points, while 516SS100B is the blunt-point version.
KYA currently lists 100 rings per collated strip for the 516 series.
KYA and Bostitch both list 10,000 rings per box for this 16GA 1/2-inch stainless C-ring size class.
No. KYA lists 1/8 inch as the closed-diameter reference, and a Bostitch SC760B forms the same 516SS100-type ring to approximately 1/8 inch. A Bostitch SC761B uses the same ring family but forms it to approximately 3/16 inch.
Yes. Bostitch officially lists RING516SS100 for the SC760B 16 gauge 1/2-inch C-ring tool.
Yes. Bostitch also officially lists RING516SS100 for the SC761B. The SC761B produces a larger approximately 3/16-inch finished closure than the SC760B.
No. Compatibility also depends on 16 gauge wire, the 516-series strip geometry, magazine, feed system and forming-jaw design.
Do not assume compatibility from the C7 name alone. Many C7-family tools are designed around larger 3/4-inch C-rings. Confirm the exact BeA tool model and its specified fastener before use.
Yes, trap and cage assembly are established applications for this stainless 516-series C-ring size. Bostitch specifically lists lobster pots and bait bags for its equivalent 516SS100.
No. SS304 provides useful corrosion resistance, but it should not be described as completely immune to saltwater or chloride corrosion. Confirm the required stainless grade for continuous marine exposure.
Yes, where the netting or mesh dimensions fit the closure produced by the selected tool. The sharp-point version can also assist where penetration through suitable soft mesh material is required.
They can be used for selected wire and mesh connections, but do not treat 516SS100 as a universal chain-link fence fastener. Check the fence wire diameter and fastening specification first.
It can be used in selected upholstery and fabric-fastening applications where the 1/2-inch C-ring and finished closure suit the assembly. Larger upholstery components may use wider C-ring systems.
516SS100 is a compact 1/2-inch stainless C-ring. The 16G110 family is a larger 3/4-inch 16GA C-ring system used where a wider open ring is required.
Provide the required quantity, exact C-ring tool manufacturer and model, desired finished closure, application, material being joined and delivery destination. Reference KYA-516SS100 for the SS304 sharp-point configuration.
