| Material: | |
|---|---|
| Finish: | |
| Point: | |
| Quantity: | |
KYA 16G110B galvanized C-rings are 16 gauge collated hog rings with approximately 1.6mm wire, a 3/4-inch ring-size class and blunt points. The rings are designed for compatible pneumatic C-ring tools used in upholstery, bedding, automotive seating, wire cages, bag closure and other industrial fastening operations.
The KYA 16110 series uses an approximately 23.8mm crown dimension, 12mm ring height and 1.6mm wire. The 3/4-inch designation identifies the ring size class rather than a simple 19mm staple crown measurement.
The featured 16G110B configuration uses galvanized steel and blunt points. KYA lists 110 rings per collated strip and 11,000 rings per box for this model.
| Product Type | Collated C-Ring / Hog Ring Fastener |
| Model | 16G110B |
| KYA Code | KYA-RING16G110B |
| Gauge | 16 Gauge |
| Wire Diameter | Approximately 1.6mm |
| Ring Size Class | 3/4" |
| Published Crown Dimension | Approximately 23.8mm |
| Ring Height | Approximately 12mm |
| Published Nominal Closure | Approximately 3/16" / 4.8mm; actual finished closure depends on tool and joined material |
| Material | Steel |
| Finish | Galvanized; current KYA product page identifies the featured version as electro-galvanized |
| Point Type | Blunt Point |
| Collation | Glue-Collated Strip |
| Rings per Strip | 110 pcs |
| Rings per Box | 11,000 pcs |
| Published Box Weight | Approximately 15 lbs |
| Primary Applications | Automotive seating, bedding, upholstery, caging, bag closure, insulation blankets, wire and cord fastening |
The 16G110B belongs to the 16 gauge 16110 C-ring family. The open ring is fed from a collated strip into a compatible pneumatic tool, positioned around the components being joined and formed by the tool jaws into a closed C-shaped connection.
Unlike a conventional staple, the ring is formed around the assembly rather than driven as two straight legs into a substrate. For this reason, open ring dimensions, wire diameter, ring height, tool jaws and finished closure all matter when selecting a replacement fastener.
The 16G110B uses approximately 1.6mm wire. Wire diameter is an important compatibility parameter because the magazine, feeder and forming jaws are designed around a specific C-ring family.
The 3/4-inch designation identifies the common size class of this 16GA C-ring system. KYA's product catalog publishes a crown dimension of approximately 23.8mm and ring height of approximately 12mm for the 16110 series.
For cross-brand replacement, compare the actual technical dimensions rather than interpreting the 3/4-inch designation as a simple 19mm staple crown.
The B suffix identifies the blunt-point version. Blunt rings are used where the fastener is intended primarily to close around wire, spring, cord, mesh or another component instead of intentionally piercing the material.
Blunt point should not be described as completely eliminating injury or material damage. Normal handling precautions and correct tool operation are still required.
The featured 16G110B uses galvanized steel. KYA currently describes this product as electro-galvanized, providing a zinc-coated surface compared with untreated steel.
Galvanized steel should be selected according to the actual environment. For constant moisture, salt exposure or corrosive chemicals, consider whether stainless steel or another coating is required.
The 16110 family is supplied with 110 rings per strip. KYA lists 11,000 rings per box, providing 100 strips per box when packed according to the published configuration.
The key difference between the 16G110B and 16G110 is point type. Both belong to the same 16 gauge galvanized 3/4-inch C-ring family.
| Model | Material / Finish | Point | Strip Size | Box Quantity |
|---|---|---|---|---|
| 16G110 | Galvanized Steel | Sharp | 110 rings | 11,000 rings |
| 16G110B | Galvanized Steel | Blunt | 110 rings | 11,000 rings |
| Point Type | General Selection Guidance |
|---|---|
| Blunt Point | Use where the ring primarily forms around wire, springs, cord, mesh or similar components without intentional piercing. |
| Sharp Point | Use where the fastening process requires the ring to pierce suitable fabric, covering material or another penetrable component before closing. |
The featured product is the galvanized blunt-point 16G110B. KYA also lists other material and point configurations within the same 16110 family.
| Part Number | Material / Finish | Point |
|---|---|---|
| 16G110 | Galvanized Steel | Sharp |
| 16G110B | Galvanized Steel | Blunt |
| 16GF110 | Galfan / Zn-Al Coated Steel | Sharp |
| 16SS110 | Stainless Steel | Sharp |
| 16AL110 | Aluminum | Sharp |
These configurations should be treated as separate product references rather than as finishes of one exact 16G110B SKU.
The 16 gauge 3/4-inch C-ring system is used in industrial fastening operations where the ring closes around wire, springs, cord, mesh or related components.
Automotive seat assembly
Furniture upholstery
Mattress and bedding assembly
Bedding ticking to innerspring or border wire
Animal cages and wire enclosures
Medium and large bag closure
Bungee cord fastening
Insulation blankets
Oil-absorption socks
Nursery and pot tagging
Selected wire mesh and netting applications
For gabion baskets, structural mesh and other load-sensitive wire assemblies, confirm the approved ring material, wire diameter, closure and fastening specification. Do not assume that every 16GA C-ring is suitable solely because it can physically close around the wire.
Bostitch identifies 16G110B-type rings for automotive seat assembly and bedding applications. The blunt-point format is useful where the ring closes around seat wires, springs or other components rather than intentionally piercing upholstery material.
Seat and furniture construction varies by manufacturer. Confirm the required C-ring series, finished closure and tool nose before replacing an existing production fastener.
The ring can be formed around suitable wire, mesh, cord or bag material to produce a compact mechanical closure. Common industrial uses include animal cages, packaging, bag closure, insulation products and nursery applications.
The combined diameter and compressibility of the joined materials should be compatible with the closure produced by the selected C-ring tool.
Tool compatibility should be based on the complete 16110 / 16G110B ring system, not simply on the words "16 gauge" or "3/4 inch."
| Reference Tool / System | Published Ring Reference | Compatibility Guidance |
|---|---|---|
| Bostitch SC742B | RING16G110B officially listed | Strong direct market reference for 16GA 3/4" galvanized blunt C-rings |
| Bostitch SC743B | RING16G110B officially listed | Strong direct market reference for the same ring size class |
| Great Lakes GLF443 | 16G110B listed within its 16 Series ring system | Relevant 3/4" 16GA C-ring tool reference |
| KYA C7-Series Tools | KYA identifies C7-family tools with this ring family | Confirm exact KYA tool model, nose and closure before ordering |
| Other 16GA C-Ring Tools | Varies by manufacturer | Must match wire diameter, ring dimensions, strip geometry, magazine and closure range |
KYA also lists C7E, C7CA and BeA C7 tools for this ring family. Check the exact tool nose, strip feed and closure setup before ordering.
Avoid stating that 16G110B fits every 3/4-inch C-ring tool. Different tools can use different magazines, jaw profiles, strip geometry and finished closure ranges.
KYA currently lists approximately 3/16" as the closure reference for this ring family. In practice, the final ring shape is produced by the pneumatic tool's jaws and can vary according to the nose configuration and material being fastened.
For example, published SC742 / SC743 16-series systems list an approximate closure range of 3/16"–11/32" / 4.8–8.7mm. This means the finished closure should not be treated as one fixed dimension for every tool and application.
| Published Ring Size | 3/4" class |
| KYA Nominal Closure Reference | Approximately 3/16" / 4.8mm |
| Published SC742 / SC743 Closure Range | Approximately 3/16"–11/32" / 4.8–8.7mm |
| What Controls Final Closure | Tool jaws, nose configuration, ring geometry and material thickness |
| Material / Finish | General Selection Guidance |
|---|---|
| Galvanized Steel | Featured 16G110B configuration for general industrial applications where the galvanized coating meets the service environment |
| Galfan / Zn-Al Coated Steel | Separate 16GF110 configuration where that coating system is specified |
| Stainless Steel | Separate 16SS110 family configuration for applications requiring stainless steel corrosion resistance |
| Aluminum | Separate 16AL110 configuration where aluminum rings are required |
The exact product shown on this page is 16G110B galvanized steel with a blunt point. Other materials belong to separate part numbers and should not be represented as finishes of the same SKU.
| Part Number | 16G110B |
| Gauge | 16 Gauge |
| Wire Diameter | Approximately 1.6mm |
| Ring Size Class | 3/4" |
| Published Crown | Approximately 23.8mm |
| Ring Height | Approximately 12mm |
| Point Type | Blunt |
| Finish | Galvanized |
| Collation | Glue-Collated |
| Strip Size | 110 rings |
| Box Quantity | 11,000 rings |
| Tool Information | Provide exact C-ring tool manufacturer, model and required closure |
For accurate quotation and tool matching, provide the required quantity, pneumatic C-ring tool manufacturer and exact model, materials being joined, application, required finished closure and delivery destination.
For the exact product shown on this page, specify KYA-RING16G110B, 16 gauge, 1.6mm galvanized steel C-ring, 3/4-inch size class, approximately 23.8mm crown, 12mm height and blunt point.
The listing states that custom finishes and packaging are available and gives a 20–30 day shipping lead time. KYA states that it exports to more than 50 countries. Confirm the current schedule, minimum order, selected finish, package details and destination when requesting a quotation.
| KYA Code | KYA-RING16G110B |
| Gauge | 16 Gauge |
| Wire Diameter | Approximately 1.6mm |
| Ring Size | 3/4" class |
| Published Crown | Approximately 23.8mm |
| Ring Height | Approximately 12mm |
| Point | Blunt |
| Finish | Galvanized |
| Strip | 110 rings |
| Packing | 11,000 rings / box |
| Published Box Weight | Approximately 15 lbs |
| Inquiry Information | Quantity, exact tool model, application, joined materials, required closure and delivery destination |
The 16G110B is a 16 gauge C-ring with approximately 1.6mm wire. It belongs to the 3/4-inch ring-size class, while KYA publishes an approximately 23.8mm crown and 12mm ring height for the 16110 series.
The 3/4-inch description is best treated as the ring-size designation. KYA's technical catalog lists the crown dimension at approximately 23.8mm rather than 19.05mm.
The B suffix identifies the blunt-point version. The related 16G110 is the galvanized sharp-point configuration.
The page identifies this version as electro-galvanized, while another product description refers to hot-dip galvanized wire. Confirm the coating process in the purchase specification if the zinc-coating type is critical.
KYA lists 110 rings per collated strip for the 16110 series.
KYA and Bostitch both list 11,000 rings per box for the 16G110B size class.
Not necessarily. KYA publishes 3/16" as a nominal closure reference, while compatible SC742 / SC743 systems publish an approximate 3/16"–11/32" closure range. Tool jaws and joined material affect the final shape.
Yes. Bostitch officially lists RING16G110B for the SC742B pneumatic hand tool.
Yes. Bostitch officially lists RING16G110B for the SC743B pneumatic hand tool.
No. A compatible tool must match the 16110 / 16G110B ring dimensions, strip geometry, magazine, wire diameter and required closure.
Blunt points are useful where intentional piercing is not required, but they do not eliminate all handling or installation risks. The correct point type should be selected for the materials being joined.
Yes. Automotive seat assembly is an established application for this 16GA C-ring family when the seat design and tool call for the same ring dimensions.
Yes. Bedding applications include fastening ticking and related components to innerspring or border-wire assemblies where the 16G110B ring size is suitable.
Yes, the 16110 ring family is used for selected cages, wire products and netting. Confirm that the wire combination fits the closure produced by the tool.
Do not assume suitability solely from the ring size. Gabion systems can require specific wire materials, coatings, ring strength and closure dimensions. Follow the gabion manufacturer's fastening specification.
No. Zinc plating provides corrosion protection compared with untreated steel, but performance depends on moisture, chemicals, salt exposure and service conditions.
16G110B uses galvanized steel. Stainless versions belong to the separate 16SS110 family and are selected where stainless steel corrosion resistance is required.
Provide the required quantity, exact C-ring tool manufacturer and model, materials being joined, application, required finished closure and delivery destination. Reference KYA-RING16G110B for the galvanized blunt-point version.
