KYA 2-inch 16 gauge L-cleat flooring nails are designed for professional installation of tongue-and-groove hardwood flooring using compatible manual or pneumatic flooring nailers. The L-shaped head, straight-strip collation and flooring-cleat profile make the L50 suitable for common 5/8" and 3/4" nail-down hardwood flooring applications when the flooring manufacturer permits 16 gauge cleats.
The featured L50 measures approximately 2" / 50 mm long and is supplied at 1,000 cleats per box. KYA also lists 1-1/2" and 1-3/4" L-cleats in the same 16 gauge flooring fastener range.
2" / 50 mm length: commonly used for nail-down tongue-and-groove hardwood flooring within the tool and flooring manufacturer's specified range.
16 gauge flooring cleat: robust fastener format used by many professional hardwood flooring nailers.
L-shaped head: designed specifically for seating into the tongue area of nail-down wood flooring.
Barbed cleat profile: provides mechanical engagement with the wood subfloor after installation.
Formed flooring point: designed for penetration into hardwood and compatible subfloor materials.
Straight-strip collation: supplied in collated strips for compatible 16 gauge L-cleat flooring nailers.
1,000 pieces per box: commercial packaging suitable for flooring contractors, distributors and industrial buyers.
Three common lengths: L38, L45 and L50 cover 1-1/2", 1-3/4" and 2" flooring-cleat requirements.
| Parameter | Specification |
|---|---|
| Model | L50 |
| Fastener Type | L-Cleat Flooring Nail |
| Gauge | 16 Gauge |
| Length | 2" / approximately 50 mm |
| Head Type | L-Shaped Flooring Cleat Head |
| Collation | Straight Strip |
| Material | Steel |
| Profile | Barbed Flooring Cleat |
| Pieces per Box | 1,000 pcs |
| Boxes per Carton | 10 boxes |
| Typical Application | Tongue-and-groove nail-down hardwood flooring |
KYA supplies three common 16 gauge L-cleat lengths. Select the fastener length according to the flooring thickness, tongue profile, subfloor and the flooring manufacturer's installation instructions.
| Model | Length | Gauge | Pieces / Box | Boxes / Carton |
|---|---|---|---|---|
| L38 | 1-1/2" / 38 mm | 16 Ga | 1,000 | 10 |
| L45 | 1-3/4" / 45 mm | 16 Ga | 1,000 | 10 |
| L50 | 2" / 50 mm | 16 Ga | 1,000 | 10 |
L-cleats are purpose-designed for nail-down tongue-and-groove wood flooring. During installation, the flooring nailer positions the cleat through the tongue at the required angle so the next flooring board can engage with the groove.
The L-shaped head provides a seating surface while the flooring-cleat body engages with the subfloor. Professional cleat manufacturers use this design for solid hardwood and compatible engineered flooring systems.
The formed barbs along the cleat provide mechanical engagement with compatible wood and subfloor materials after the fastener has been driven. This design is commonly used in professional flooring cleats to help secure the installed flooring while still allowing the wood flooring system to respond to normal seasonal movement.
Holding performance depends on the complete installation, including wood species, fastener length, subfloor material, cleat spacing, moisture conditions and flooring manufacturer's requirements.
Two-inch 16 gauge L-cleats are commonly used with 5/8" and 3/4" tongue-and-groove hardwood flooring. Some professional cleat systems also list 2" fasteners for thicker flooring profiles.
The correct fastener length should not be selected by flooring thickness alone. The tongue position, flooring construction, subfloor thickness and flooring manufacturer's installation instructions also determine the appropriate cleat length.
| Flooring Consideration | Selection Guidance |
|---|---|
| 5/8" Hardwood | 2" 16GA cleats are supported by several professional flooring-nailer systems; verify flooring profile and subfloor. |
| 3/4" Hardwood | A common application for 2" 16GA L-cleats in nail-down tongue-and-groove flooring. |
| Engineered Flooring | Use 16GA L-cleats only when the engineered-flooring manufacturer permits this fastener type and length. |
| Thin or Very Dense Flooring | A thinner cleat may be specified to reduce the risk of tongue damage; follow the flooring manufacturer's instructions. |
Oak flooring: nail-down tongue-and-groove installations using compatible 16 gauge flooring nailers.
Maple flooring: professional flooring installation where the manufacturer specifies 16 gauge cleats.
Walnut flooring: compatible solid hardwood flooring systems.
Hickory flooring: use only when the flooring manufacturer permits 16 gauge cleats for the specific product.
Other solid hardwood: 5/8", 3/4" and other compatible tongue-and-groove flooring profiles.
Selected engineered flooring: only where the flooring construction and manufacturer permit a 16 gauge L-cleat installation.
Discuss Your Flooring Application
Two-inch 16 gauge L-cleats are supported by a number of established professional flooring-nailer platforms. Exact compatibility should be checked against the tool manufacturer's fastener specification.
| Tool Family | Published Fastener Reference |
|---|---|
| Powernail 445 Series | 16 gauge L-cleats from 1-1/2" to 2". |
| Powernail Model 45 | Manual flooring nailer for 16 gauge L-cleats from 1-1/2" to 2". |
| BOSTITCH MFN-201 | 16 gauge L-type flooring cleats in 1-1/2" and 2" lengths. |
| SENCO SHF200 | 16 gauge L-head flooring cleats from 1-1/2" to 2". |
| Primatech P250 L-Cleat Configurations | Available with dedicated 16 gauge L-cleat magazines. |
| DEWALT DWFP12569 | Drives 16 gauge L-cleats from 1-1/2" to 2". |
| Freeman 16GA Flooring Nailers | Selected Freeman flooring nailers accept 16 gauge L-cleats from 1-1/2" to 2". |
Do not select a flooring nail solely by brand name. Confirm 16 gauge L-cleat compatibility, accepted length, strip dimensions and flooring-nailer model before placing a bulk order.
For this 2" 16 gauge L-cleat, the relevant Powernail platforms are the Model 45 and Model 445. Both are designed for 16 gauge Powercleats in lengths up to 2".
The Powernail 50P uses 18 gauge cleats up to 1-3/4", while the Powernail 2000F uses 20 gauge cleats up to 1-1/4". Those tools should not be listed as compatible with a 2" 16 gauge L-cleat.
Sixteen gauge L-cleats are widely used for conventional 5/8" and 3/4" nail-down hardwood flooring. Thinner 18 gauge cleats are available for thinner flooring and for selected dense or exotic species where the flooring or tool manufacturer recommends a smaller fastener.
For bamboo, very hard exotic flooring or thinner engineered products, do not assume that a 16 gauge 2" cleat is the correct choice. Follow the flooring manufacturer's installation instructions and select the cleat gauge and length accordingly.
The L-cleats are supplied in straight collated strips for loading into compatible flooring nailers. The current KYA packing information lists 1,000 cleats per box and 10 boxes per carton.
For palletized distributor orders, the current product information lists approximately 45–60 boxes per pallet. Confirm the final carton and pallet configuration when requesting a quotation because export packing can vary by order.
For quotations, provide the required cleat length, quantity, destination market, flooring thickness, wood type and flooring nailer model. If the cleat will be used with an engineered or specialty flooring product, include the flooring manufacturer's fastening requirements.
The current KYA product information lists an MOQ of 50 boxes and indicates that sample quantities can be arranged. Confirm current MOQ, sample quantity, freight terms and packing when requesting pricing.
The L50 is a 2" / approximately 50 mm long, 16 gauge L-shaped flooring cleat.
Yes. Two-inch 16 gauge L-cleats are commonly used with 3/4" tongue-and-groove hardwood flooring. Confirm the flooring manufacturer's required fastener length and subfloor conditions before installation.
Several professional 16 gauge flooring-nailer systems support 2" L-cleats for 5/8" hardwood flooring. Verify the specific flooring profile and manufacturer's installation instructions.
Only when the engineered-flooring manufacturer permits 16 gauge L-cleats and the selected 2" length. Engineered flooring varies significantly in thickness and construction.
Do not assume that a 16 gauge 2" cleat is suitable for every bamboo floor. Some professional flooring-tool manufacturers recommend thinner 18 gauge cleats for dense bamboo and other hard flooring species to reduce the risk of tongue damage.
L-cleat geometry is designed for hardwood flooring installation, but no fastener can guarantee that tongue splitting will never occur. Wood species, moisture content, tongue geometry, cleat gauge, tool setup and installation technique all affect the result.
The Powernail 445 is designed for 16 gauge L-cleats from 1-1/2" to 2", so the 2" L50 falls within its published fastener range.
Yes. The manual Powernail Model 45 is specified for 16 gauge Powercleats from 1-1/2" to 2".
No. The Powernail 50P is an 18 gauge flooring nailer and its published fastener range stops at 1-3/4". It should not be listed as compatible with a 2" 16 gauge L-cleat.
No. The Powernail 2000F uses 20 gauge flooring cleats in 1" and 1-1/4" lengths, so it is a different fastener platform.
The BOSTITCH MFN-201 is specified for 16 gauge L-type flooring cleats in 1-1/2" and 2" lengths, so the L50 size falls within its published range.
Yes. The SENCO SHF200 accepts 16 gauge L-head flooring cleats from 1-1/2" to 2".
Primatech P250 tools are available in dedicated 16 gauge L-cleat configurations. Confirm that the exact P250 version has the L-cleat magazine before use.
The DEWALT DWFP12569 is designed to drive 16 gauge L-cleats from 1-1/2" to 2", so this 2" size falls within the tool's published range.
The KYA L50 packing specification lists 1,000 flooring cleats per box.
KYA lists L38 at 1-1/2", L45 at 1-3/4" and L50 at 2", all in the 16 gauge L-cleat flooring nail range.
The current product information lists approximately 45–60 boxes per pallet. Confirm the final export packing configuration with KYA before ordering.
The current product information lists a minimum order quantity of 50 boxes. Confirm the current MOQ and packaging when requesting a quotation.
The current product information indicates that sample quantities can be arranged. Confirm the available sample quantity and freight arrangement when contacting KYA.
Provide the required length, quantity, destination market, flooring thickness, wood species or flooring type, subfloor material and flooring nailer model. For engineered or specialty flooring, include the flooring manufacturer's fastener requirements.
KYA supplies 2" 16 gauge L-cleat flooring nails for flooring fastener distributors, hardwood flooring suppliers, flooring contractors and professional installers. Send your required quantity, flooring thickness, flooring type and nailer model to confirm the appropriate L-cleat configuration.
