| Head: | |
|---|---|
| Finish: | |
| Degree: | |
| Quantity: | |
KYA 30 Degree SS304 Ring Shank Framing Nails are paper-tape collated framing nails made from S304 stainless steel. The featured configuration measures 2-3/8" × .113" / approximately 60mm × 2.87mm and uses a ring shank for increased withdrawal resistance in wood.
These stainless steel framing nails are intended for compatible 30-degree paper-tape framing nailers and can be considered for treated lumber, exterior framing, decking, siding, sheathing, subflooring, fencing and other corrosion-sensitive wood fastening applications where the fastener dimensions, material and head configuration meet the project requirements.
| Specification | Details |
|---|---|
| Product Type | Paper Tape Collated Framing Nail |
| Featured Size | 2-3/8" × .113" / approx. 60mm × 2.87mm |
| Material | S304 Stainless Steel |
| Collation Angle | 30° |
| Collation Type | Paper Tape |
| Shank Type | Ring Shank |
| Nominal Diameter | 2.87mm / .113" |
| Length | 60mm / 2-3/8" |
| Point | Diamond Point |
| Head | Confirm clipped or offset round head according to ordered configuration and nailer specification |
| Packaging | 3,000 nails/carton |
| Compatible Tool Type | Compatible paper-tape framing nailers that accept the required angle, .113" diameter, 2-3/8" length and head configuration |
| Typical Applications | Framing, Decking, Siding, Sheathing, Subflooring, Fencing, Treated Lumber and Exterior Wood Fastening |
Important: the specifications above describe the featured 2.87 × 60mm SS304 ring-shank configuration. Other KYA paper-tape framing nails are available in different diameters, lengths, shank types, materials, finishes and collation angles. These family options should not be treated as specifications for this exact SKU.
S304 stainless steel provides higher corrosion resistance than ordinary carbon-steel framing nails and is suitable for many exterior, humid and treated-lumber applications.
For severe salt-air, chloride or marine exposure, confirm whether the project specification requires SS316 or another higher-corrosion-resistance material.
The ring shank engages the surrounding wood fibers and increases withdrawal resistance compared with a comparable smooth-shank nail. This makes ring-shank framing nails useful where additional holding performance is required.
Paper-tape collation allows the nails to feed through compatible framing nailers while leaving minimal collation material at the fastening point.
Do not assume that every tool labeled 30–34 degrees accepts this exact fastener. Confirm the paper-tape angle, head style, .113" diameter and 2-3/8" length against the nailer manual.
The featured nail measures approximately 60mm long × 2.87mm diameter. Always confirm that this fastener size meets the required penetration, wood member thickness and applicable project specification.
| Application | Selection Consideration |
|---|---|
| Exterior Framing | Use where SS304, .113" diameter and 2-3/8" length meet the engineering or project fastening specification. |
| Decking | Ring shank provides withdrawal resistance; select stainless grade according to moisture and corrosion exposure. |
| Siding | Confirm nail diameter, head type, length and material against the siding manufacturer's fastening requirements. |
| Sheathing | Use only where 2-3/8" × .113" framing nails are permitted by the applicable fastening schedule. |
| Subflooring | Ring shank can help resist fastener backout where the selected nail size is suitable for the flooring assembly. |
| Treated Lumber | Stainless steel can be selected where treated-lumber chemistry requires increased corrosion resistance. |
| Fencing & Outdoor Woodwork | Suitable when SS304 corrosion resistance and the selected dimensions match the project requirements. |
| Material / Finish | General Corrosion Resistance | Typical Selection |
|---|---|---|
| Bright Steel | Low | Dry indoor applications where corrosion protection is not required |
| Electro-Galvanized | Basic | Indoor or low-moisture applications |
| Hot-Dip Galvanized | Higher than basic zinc coating | Outdoor construction when permitted by the project specification |
| SS304 | High | Exterior, humid and treated-lumber applications where SS304 is specified |
| SS316 | Higher chloride resistance than SS304 | Severe coastal, salt-air or marine exposure where SS316 is specified |
Framing nail compatibility should be checked by the complete fastener specification rather than by tool brand alone.
| Compatibility Item | Featured Nail Specification |
|---|---|
| Collation | Paper Tape |
| Nominal Angle | 30° |
| Diameter | .113" / 2.87mm |
| Length | 2-3/8" / approximately 60mm |
| Shank | Ring Shank |
| Head | Confirm exact ordered head configuration against the tool manual |
A framing nailer labeled 30°, 31°, 33° or 34° should not automatically be considered compatible. Confirm the manufacturer's permitted paper-tape fastener dimensions before ordering or use.
KYA supplies paper-tape framing nails for fastener distributors, building-material wholesalers, framing nailer dealers, contractors, treated-lumber suppliers and OEM buyers.
For quotations on the 2.87 × 60mm / 2-3/8" × .113" SS304 ring-shank configuration, provide the nailer model, required head style, order quantity, application, destination market and packaging requirements.
The featured size is 2-3/8" × .113", approximately 60mm long × 2.87mm diameter.
The featured configuration is made from S304 stainless steel.
The ring shank engages the surrounding wood fibers and increases withdrawal resistance compared with a comparable smooth-shank nail.
No. Confirm that the nailer accepts paper-tape nails with the required angle, head configuration, .113" diameter and 2-3/8" length.
SS304 can be suitable for many treated-lumber applications, but the required fastener material should follow the lumber treatment, exposure conditions and project specification.
SS304 provides good corrosion resistance for many exterior applications. For severe salt-air, chloride or marine exposure, confirm whether SS316 is required.
The featured 2.87 × 60mm SS304 ring-shank configuration is listed at 3,000 nails per carton.
They can be considered for decking, siding and other exterior wood fastening when the nail dimensions, stainless grade, head configuration and fastening schedule meet the material manufacturer's and project requirements.
Contact KYA Fasteners to confirm sample availability for dimensional, material and nailer-compatibility testing before bulk purchasing.
KYA can support packaging and labeling requirements for distributors and OEM buyers. Provide the required carton label, private-label and pallet-packing specifications when requesting a quotation.
