| Material: | |
|---|---|
| Surface Treatment: | |
| Quantity: | |
KYA 1.83×25mm plastic sheet coil nails are smooth-shank collated fasteners with a nominal 15-degree collation angle. The featured nail has a 1.83mm / approximately .072" shank diameter and a 25mm / approximately 1" length.
Plastic sheet collation keeps multiple nails aligned in coil form for automatic feeding through a compatible plastic-sheet coil nailer. The fastener should be selected according to the exact nail dimensions, head geometry, collation format, coil geometry and the receiving material rather than by the 15-degree description alone.
KYA lists #45 steel, stainless steel and aluminum material options within the broader plastic sheet coil nail range, together with bright, electro-galvanized and hot-dip galvanized configurations. Buyers should specify the exact material and finish required for the 1.83×25mm smooth-shank version when requesting a quotation.
| Product Type | Plastic Sheet Collated Coil Nail |
| KYA Model | 1.83 × 25mm |
| Product Code | KYA-1.83X25M |
| Shank Diameter | 1.83mm / approximately .072" |
| Nail Length | 25mm / approximately 1" |
| Shank Type | Smooth Shank |
| Collation | Plastic Sheet |
| Nominal Collation Angle | 15° |
| Head Type | Full Round Head within the KYA plastic sheet coil nail family |
| Exact Head Diameter | Confirm for this exact 1.83×25mm production configuration |
| Material Options | #45 Steel / Stainless Steel 304 or 316 / Aluminum |
| Finish Options | Bright / Electro-Galvanized / Hot-Dip Galvanized |
| Point | Confirm exact point configuration when ordering |
| Nails per Coil | Confirm exact packing; broader KYA family range is 50–300 nails per coil |
| Required Tool Type | Plastic-sheet coil nailer accepting 1.83mm diameter, 25mm length and the exact coil geometry |
The featured product combines a small 1.83mm smooth shank with a 25mm nail length and plastic sheet collation. The compact fastener size makes accurate tool matching especially important because many common 15-degree framing, siding and roofing nailers are designed for significantly larger nail diameters and lengths.
This exact KYA product uses a smooth 1.83mm shank. A smooth shank has a straight cylindrical profile without annular rings or a twisted screw pattern and is intended for applications where that fastener geometry is specified.
The featured nail is 25mm long. Because this is a relatively short coil nail, the attached material thickness and required penetration into the receiving material should be checked before specifying it for a particular installation.
The plastic carrier holds the nails in an aligned coil for automatic feeding. Plastic-sheet and wire-welded coil nails are different collation systems and should not be treated as interchangeable simply because both may use a nominal 15-degree angle.
KYA lists full round heads within its plastic sheet coil nail family. For buyers replacing another manufacturer's fastener, the exact head diameter should be confirmed because head size affects magazine feeding and passage through the tool nose.
KYA lists #45 steel, stainless steel 304/316 and aluminum within the broader plastic sheet coil nail range. Bright, electro-galvanized and hot-dip galvanized steel configurations are also listed. Availability should be confirmed for the exact 1.83×25mm smooth-shank specification.
KYA manufactures plastic sheet coil nails with different shank profiles. These configurations serve different fastening requirements and should not be combined into the specification of this exact smooth-shank SKU.
| Shank Type | Profile | Selection Consideration |
|---|---|---|
| Smooth Shank | Straight cylindrical shank | Exact configuration featured on this page |
| Ring Shank | Annular rings around the shank | Separate configuration for applications requiring increased mechanical engagement with suitable wood fibers |
| Screw Shank | Twisted or helical shank profile | Separate configuration used where a screw-shank nail is specified |
Holding performance depends on more than the shank profile. Wood species, material density, moisture content, penetration depth, nail diameter and installation conditions all affect the completed fastening.
The broader KYA plastic sheet coil nail family is supplied for applications including siding, fencing, crating, sheathing, subflooring, decking and other wood fastening. The exact 1.83×25mm fastener is considerably shorter and thinner than many conventional siding or sheathing nails, so application suitability should be confirmed separately.
Before specifying this 25mm nail, determine the thickness of the material being attached and the amount of nail penetration required into the receiving substrate.
Light wood fastening where a 25mm smooth nail is specified
Panel or component fastening where the available penetration is appropriate
Production and assembly applications using a compatible plastic-sheet coil nail system
Replacement applications already using 1.83×25mm plastic collated nails
Other fastening operations where the receiving material, nail length and tool have been verified
Do not substitute this 25mm nail for a longer siding, roof-sheathing, subfloor or structural fastener unless the relevant installation specification allows the 1.83×25mm size.
Many commercially available 15-degree plastic-sheet siding nails are significantly larger than this 1.83×25mm product. A buyer should therefore avoid matching fasteners only by descriptions such as "15-degree coil nail" or "plastic siding nail."
| Compatibility Factor | Featured KYA Nail |
|---|---|
| Shank Diameter | 1.83mm / approximately .072" |
| Nail Length | 25mm / approximately 1" |
| Shank Type | Smooth |
| Collation Type | Plastic Sheet |
| Nominal Angle | 15° |
| Head | Full round family design; confirm exact diameter |
| Coil Geometry | Must match the exact nailer magazine and feed system |
Plastic sheet and wire-welded coil nails use different methods to hold the fasteners together. A nailer designed around one collation system should not automatically be assumed to accept the other.
| Feature | Plastic Sheet Coil Nail | Wire-Weld Coil Nail |
|---|---|---|
| Collation Medium | Plastic carrier sheet | Metal wires welded to the nails |
| Magazine Requirement | Tool must support the exact plastic-sheet feed geometry | Tool must support wire-collated coil geometry |
| Interchangeability | Not automatically interchangeable with wire coil nails | Not automatically interchangeable with plastic sheet nails |
| Selection | Confirm angle, nail dimensions, head diameter, coil diameter and feed geometry | Confirm angle, nail dimensions, wire position and magazine geometry |
The description "15-degree coil nailer" alone does not establish compatibility with this 1.83×25mm nail. Many widely used 15-degree roofing, siding and framing nailers accept substantially larger fastener diameters or different collation systems.
Before ordering replacement nails, compare the existing fastener and tool specification with the 1.83mm diameter, 25mm length, smooth shank and plastic sheet collation used by this product.
| KYA Product Code | KYA-1.83X25M |
| Shank Diameter | 1.83mm / .072" |
| Length | 25mm / 1" |
| Collation | Plastic Sheet |
| Nominal Angle | 15° |
| Required Compatibility Check | Nail diameter, length, head diameter, coil diameter, plastic carrier geometry and feed mechanism |
| Recommended Inquiry Information | Provide the exact nailer manufacturer and model |
Do not assume compatibility with a MAX, BOSTITCH, SENCO, HiKOKI, Metabo HPT or other coil nailer unless its published fastener range and magazine geometry match this exact plastic-sheet fastener.
Bright steel is an uncoated configuration. It should be used only where the application does not require additional corrosion protection.
Electro-galvanizing applies a zinc coating to the steel fastener and provides more corrosion protection than untreated bright steel. It should not automatically be considered equivalent to hot-dip galvanized or stainless steel in demanding environments.
Hot-dip galvanized versions can be selected where a heavier zinc coating is required. Confirm the required coating and compatibility with the material being fastened before ordering.
KYA lists stainless steel 304 and 316 options within the broader plastic sheet coil nail family. The required stainless grade should be selected according to the service environment and purchasing specification.
Aluminum is also listed within the KYA product family. Suitability depends on the receiving material, required fastening performance and environmental conditions.
Confirm that the requested material and finish are available specifically in the 1.83×25mm smooth-shank configuration before placing a bulk order.
KYA supplies a broader plastic sheet coil nail family in additional lengths, diameters, shank styles, points, materials and finishes. These family ranges provide purchasing options but should not be interpreted as the dimensions of this exact 1.83×25mm SKU.
| Family Parameter | KYA Listed Range / Options | Featured SKU |
|---|---|---|
| Length | Approximately 22–100mm within the broader family | 25mm |
| Shank Diameter | Approximately 1.80–3.76mm within current family data | 1.83mm |
| Shank Type | Smooth / Ring / Screw | Smooth |
| Head | Full Round; broader family head sizes vary | Confirm exact head diameter |
| Point Options | Diamond / Clinch / Round / Chisel Blunt / Blunt | Confirm exact point |
| Material Options | #45 Steel / Stainless Steel 304 or 316 / Aluminum | Specify when ordering |
| Finish Options | Bright / Electro-Galvanized / Hot-Dip Galvanized | Specify when ordering |
| Coil Quantity | 50–300 nails per coil within the broader family | Confirm exact packing |
For accurate quotation and product matching, provide the required quantity, material, finish, point requirement, nailer manufacturer and model, attached material, receiving material and delivery destination.
For the exact product shown on this page, reference KYA-1.83X25M and specify 1.83mm diameter × 25mm length, smooth shank and 15-degree plastic sheet collation.
| Product Code | KYA-1.83X25M |
| Size | 1.83 × 25mm / approximately .072" × 1" |
| Shank | Smooth |
| Collation | 15° Plastic Sheet |
| Material | Specify required material |
| Finish | Specify Bright / Electro-Galvanized / Hot-Dip Galvanized or required material configuration |
| Head Diameter | Confirm if required for tool interchange |
| Point | Confirm required point configuration |
| Packing | Confirm nails per coil and carton configuration |
| Nailer Information | Provide exact manufacturer and model for compatibility checking |
| Application Information | Provide attached material, receiving material and material thickness |
The featured product has a 1.83mm / approximately .072" shank diameter and a 25mm / approximately 1" length.
The current KYA product code for the 1.83×25mm smooth-shank version is KYA-1.83X25M.
This specific product uses a smooth shank. Ring and screw shanks are separate configurations within the broader KYA plastic sheet coil nail family.
The featured nail uses plastic sheet collation with a nominal 15-degree coil configuration.
No. The nailer must accept plastic sheet collation, a 1.83mm nail diameter, 25mm nail length, the required head size and the exact coil and feed geometry.
Do not assume compatibility. Many roofing nailers use approximately .120" / 3.05mm wire-collated roofing nails, which are substantially larger than this .072" / 1.83mm plastic-sheet nail.
The published MAX CN55 fastener range commonly uses larger wire-collated nails than this 1.83×25mm plastic-sheet configuration. Do not assume compatibility without checking the exact tool and magazine specification.
The broader plastic sheet coil nail family is used for siding, but siding fastener requirements vary considerably. This 25mm nail is shorter and thinner than many conventional siding nails, so confirm the siding material, substrate and required penetration before use.
Only where the applicable installation specification permits a 1.83×25mm fastener. Do not substitute this short nail for a longer sheathing or subfloor nail solely because both products use coil collation.
KYA lists #45 steel, stainless steel 304/316 and aluminum options within its broader plastic sheet coil nail range. Confirm availability for the exact 1.83×25mm smooth-shank specification.
KYA lists bright, electro-galvanized and hot-dip galvanized steel configurations within the broader product family. Specify the required finish when requesting this 1.83×25mm SKU.
The current KYA family information lists approximately 50–300 nails per coil depending on the configuration. Confirm the exact coil quantity for KYA-1.83X25M before ordering.
Provide the required quantity, material, finish, nailer manufacturer and model, attached material, receiving material, material thickness and any required head or point specification. Reference KYA-1.83X25M for this smooth-shank 1.83×25mm product.
