| Quantity: | |
|---|---|
KYA 15 Degree Stainless Steel Torx Plastic Sheet Coil Nail Screws combine pneumatic collated installation with a threaded nail-screw design that can provide increased withdrawal resistance and allows adjustment or removal when the Torx drive remains accessible.
This model is 2.8mm × 50mm / approximately 0.11 in. × 2 in., KYA code KYA-28X50S, with 15° plastic sheet collation and a Torx drive. KYA's stainless nail-screw range includes 304 and 316 stainless steel and multiple thread configurations; confirm the required grade and thread for the 2.8×50mm configuration when ordering.
This type of fastener is designed for compatible plastic-sheet coil nailers and can be considered for decking, boardwalks, exterior wood assemblies, fencing, siding, outdoor furniture and other applications where corrosion resistance, threaded holding performance and possible fastener removal are required.
| Specification | Details |
|---|---|
| Model | 2.8mm × 50mm |
| KYA Code | KYA-28X50S |
| Fastener Type | Plastic Sheet Coil Nail Screw / Nail-Screw Hybrid Fastener |
| Nominal Diameter | 2.8mm / approximately .110 in. |
| Length | 50mm / approximately 2 in. |
| Collation | Plastic Sheet Coil |
| Collation Angle | 15° |
| Drive Type | Torx Drive; Confirm Exact Torx Size for the Ordered Configuration |
| Thread Options | Fine Thread / Coarse Thread / Other Nail-Screw Thread Configurations |
| Material Options | Stainless Steel 304 / 316; confirm the selected grade for the 2.8×50mm configuration |
| Family Coil Capacity | 200–325 pcs across the product range depending on diameter and configuration; confirm the exact 2.8×50mm coil count when ordering |
| Compatible Tool Type | Compatible 15° Plastic Sheet Coil Nailers Rated for the Exact Fastener Dimensions |
| Typical Applications | Decking, Boardwalks, Siding, Fencing, Exterior Woodwork, Outdoor Furniture and Selected Coastal Applications |
Ordering note: coil count varies by fastener diameter and configuration. For the 2.8×50mm model, confirm the exact coil capacity, Torx recess size, thread profile and head dimensions when placing an order.
Request 2.8x50mm Nail Screw PricingA coil nail screw is a threaded fastener designed to be driven through a compatible pneumatic coil nailer. It combines collated pneumatic installation with a screw-like thread and a drive recess in the head.
Unlike a conventional coil nail, the Torx recess can allow the installed nail screw to be adjusted or removed with a matching driver when the head remains accessible. This makes nail screws useful in assemblies that may require repair, replacement or disassembly after installation.
Plastic-sheet collation holds the fasteners in a coil and feeds them through a compatible 15° magazine. Tool matching should be based on the complete fastener geometry rather than the 15° angle alone.
The Torx recess provides positive engagement with a matching driver bit. When the head remains accessible after pneumatic installation, the fastener can potentially be tightened, adjusted or backed out.
Plastic-sheet collation organizes the nail screws into a coil for automatic feeding. The fastener separates from the carrier during driving, allowing repetitive installation with compatible pneumatic equipment.
The threaded shank engages surrounding wood fibers after installation and can provide greater resistance to withdrawal than a comparable smooth nail. Actual performance depends on thread geometry, wood species, penetration and installation conditions.
Stainless steel provides higher corrosion resistance than ordinary carbon-steel fasteners. KYA's stainless nail-screw range includes 304 and 316 options. Select the grade according to humidity, outdoor exposure, chloride conditions and the project specification, and confirm availability for the required 2.8×50mm configuration.
Point geometry affects entry into wood and the tendency of some materials to split. The exact point specification should be confirmed for the ordered configuration, especially for sensitive softwood or exterior decking applications.
| Feature | Plastic Sheet Nail Screw | Standard Coil Nail | Conventional Screw |
|---|---|---|---|
| Installation | Compatible pneumatic coil nailer | Compatible pneumatic coil nailer | Screwdriver or screw gun |
| Shank | Threaded | Smooth, ring or screw shank depending on product | Threaded |
| Drive Recess | Yes, Torx on this product family | Normally no screwdriver recess | Yes |
| Post-Installation Adjustment | Possible when drive remains accessible | Generally not designed for adjustment | Yes |
| Removal | Can be backed out with matching bit where accessible | Usually pulled or pried out | Can be unscrewed |
The 2.8×50mm product uses a Torx drive. Other KYA nail-screw configurations may use Phillips, Pozi or Square drives. Specify the required drive type and recess size when ordering because these systems are not interchangeable.
| Material | General Characteristics | Typical Selection |
|---|---|---|
| Stainless Steel 304 / A2 | Good corrosion resistance for many exterior and humid environments | General outdoor woodwork, decking, furniture and humid environments where 304 is specified |
| Stainless Steel 316 / A4 | Higher resistance to chloride exposure than 304 | Coastal, salt-air and more aggressive environments where 316 is specified |
Material selection should follow the actual exposure environment, timber treatment and project requirements. The term “stainless steel” alone is not enough when chloride or coastal exposure is significant.
Stainless nail screws can be used in suitable decking assemblies where a corrosion-resistant threaded fastener and possible post-installation adjustment are desirable. Confirm timber species, fastener length, thread and stainless grade before use.
Boardwalks, promenades and exterior timber walkways can benefit from stainless fastening systems where moisture exposure and future board replacement are important considerations.
Threaded stainless fasteners can be used in compatible fencing assemblies where holding performance and corrosion resistance are required.
Benches, tables and other outdoor wood products can use stainless nail screws where the fastener dimensions and material grade match the assembly requirements.
Selected wood and compatible siding systems may use stainless nail screws where the specified head, thread, length and installation method are appropriate.
The 2.8×50mm product is one configuration within a broader KYA plastic-sheet nail-screw family. The following figures are family ranges rather than specifications that apply to every individual SKU.
| Family Parameter | Available Range / Options |
|---|---|
| Diameter | 2.5–3.2mm / .099"–.126" |
| Length | 25–90mm / 1"–3-1/2" |
| Drive | Torx; Phillips, Pozi and Square options listed within the family |
| Thread | Fine, Coarse and other specified thread profiles |
| Material | Stainless Steel 304 / 316 |
| Coil Capacity | 200–325 pcs depending on fastener configuration |
| Collation | 15° Plastic Sheet Coil |
Compatibility varies by nailer model. A 15° rating alone does not establish fit; the nailer must accept plastic-sheet collation, the 2.8mm diameter, 50mm length, head geometry, coil dimensions and feed configuration used by the ordered fastener.
| Compatibility Factor | What to Confirm |
|---|---|
| Collation Angle | 15° |
| Collation Type | Plastic Sheet Coil |
| Fastener Diameter | 2.8mm |
| Fastener Length | 50mm |
| Head Diameter / Shape | Confirm against nailer driver and magazine specifications |
| Coil Diameter / Capacity | Must fit the tool magazine |
| Tool Model | Provide exact manufacturer and model for confirmation |
| Purchasing Information | Information to Provide |
|---|---|
| Size | 2.8mm × 50mm |
| Material | Specify SS304 or SS316 |
| Drive | Specify Torx recess and required bit size |
| Thread | Fine, coarse or required thread profile |
| Nailer Model | Provide exact tool brand and model |
| Application | Decking, siding, fencing, outdoor furniture or other wood assembly |
| Timber / Substrate | Provide wood species, treated lumber or other material details |
| Quantity | Coils, boxes, pallets or annual volume |
| Packaging | Standard or OEM/private-label requirements |
This model is 2.8mm × 50mm, code KYA-28X50S.
The nail screws are connected by a plastic carrier in a 15° coil configuration designed to feed through compatible plastic-sheet coil nailers.
The Torx recess provides positive driver-bit engagement and can allow the installed nail screw to be adjusted or removed when the head remains accessible.
Yes, if the drive recess remains accessible and undamaged, a matching Torx bit can be used to back the nail screw out.
KYA's stainless nail-screw range includes both 304 and 316 stainless steel. Confirm which grade is available for the required 2.8×50mm configuration when requesting a quotation.
316 stainless steel generally provides better resistance to chloride exposure than 304 and is commonly considered for more demanding coastal or salt-air environments. Final selection should follow the project specification and actual exposure conditions.
Yes, decking is a relevant application for stainless plastic-sheet nail screws when the fastener size, thread, stainless grade, timber species and installation requirements are compatible.
They can be considered for compatible exterior wood structures, but the correct stainless grade and complete fastening specification should be selected according to salt, moisture and structural exposure.
Coil capacity across the KYA product range is 200–325 fasteners per coil, depending on fastener size and configuration. Confirm the exact coil count for the 2.8×50mm model when ordering.
No. Compatibility depends on plastic-sheet collation, fastener diameter, length, head geometry and magazine dimensions. Provide the exact nailer model for confirmation.
Some coil nailers from Bostitch, Hitachi / Metabo HPT, Senco and Max may use related 15° fastener systems, but compatibility must be checked by exact model. Brand name alone does not establish fit.
Fine, coarse and other nail-screw thread configurations are available within the KYA range. Specify the thread required for the substrate and application when ordering.
Their main productivity advantage is pneumatic collated installation rather than manual placement of individual screws. Actual installation speed depends on the tool, operator, substrate and fastening process, so no fixed speed multiplier should be assumed without application-specific testing.
Provide size, stainless grade, Torx size, thread type, nailer model, application, wood species or substrate, quantity, destination market and packaging requirements.
Contact KYA Fasteners to check sample availability. Test the exact fastener configuration with the intended nailer, timber and application before bulk production use.
Ask About Stainless Coil Nail ScrewsKYA supplies stainless steel plastic-sheet coil nail screws for fastener distributors, pneumatic-tool distributors, decking suppliers, outdoor furniture manufacturers, fencing suppliers, construction suppliers and professional wood-product manufacturers.
For quotations on 2.8×50mm 15° stainless steel Torx plastic sheet coil nail screws, provide the required stainless grade, thread, Torx size, nailer model, quantity, application and packaging requirements.
Request a Bulk Quote View More Coil Nail Screws
