| Width*Thickness*Pcs: | |
|---|---|
| Quantity: | |
KYA 0.58 × 0.75 × 167 Staple and Brad Nail Wire Band is a collated flat steel wire band designed as production material for manufacturing staples, brad nails and pin nails. The listed specification combines a 0.58 mm × 0.75 mm flattened wire section with 167 individual wires per band.
For this 0.58 × 0.75 × 167 configuration, KYA lists a galvanized version with 950–1050 N/mm² tensile strength and a copper-coated version with 540–750 N/mm² tensile strength. Stainless steel wire is also available within the broader staple wire band range, with the exact specification to be confirmed according to the required finished fastener.
The wire band is packed on a wooden wheel. Corrugated cardboard is used between wire-band layers to increase pressure-bearing capacity during handling and transportation.
| Parameter | Galvanized Option | Copper-Coated Option |
|---|---|---|
| Model | 0.58 × 0.75 × 167 | 0.58 × 0.75 × 167 |
| Product Type | Staple / Brad Nail Wire Band | Staple / Brad Nail Wire Band |
| Width × Thickness × Pcs | 0.58 mm × 0.75 mm × 167 | 0.58 mm × 0.75 mm × 167 |
| Tensile Strength | 950–1050 N/mm² | 540–750 N/mm² |
| Coating | Galvanized | Copper Coating |
| Packing | Wooden Wheel | Wooden Wheel |
| Main Use | Manufacturing staples, brads and pins | Manufacturing staples, brads and pins |
The galvanized and copper-coated versions share the same 0.58 × 0.75 × 167 dimensional configuration, but their listed tensile-strength ranges differ. Specify both the required surface treatment and tensile strength when requesting a quotation.
The KYA product specification is listed as Width × Thickness × Pcs. It identifies the cross-sectional dimensions of each flattened wire and the number of individual wires assembled into the continuous band.
| Value | Meaning |
|---|---|
| 0.58 mm | Nominal wire width according to the KYA product specification. |
| 0.75 mm | Nominal wire thickness according to the KYA product specification. |
| 167 | Number of individual flattened wires arranged in the band. |
When comparing wire band from different suppliers, confirm the dimensional drawing or existing material because suppliers may use a different order when describing wire width and thickness.
The listed galvanized version uses a 0.58 × 0.75 × 167 configuration with a tensile-strength range of 950–1050 N/mm². The zinc-coated surface provides the galvanized finish used for the wire before it is converted into finished staples, brads or pins.
For replacement material, confirm both the dimensional configuration and tensile-strength range used by the existing production process.
The listed copper-coated version uses the same 0.58 × 0.75 × 167 dimensions with a tensile-strength range of 540–750 N/mm².
Because the listed mechanical properties differ from the galvanized version, coating should not be selected independently from tensile strength and the requirements of the finished fastener.
| Item | Available Product Information |
|---|---|
| Galvanized Steel | Available for the 0.58 × 0.75 × 167 specification at 950–1050 N/mm². |
| Copper-Coated Steel | Available for the 0.58 × 0.75 × 167 specification at 540–750 N/mm². |
| Stainless Steel | Referenced within the broader KYA staple wire band range; confirm grade and mechanical specification before ordering. |
| Flattening Range | The broader product range references wire from approximately 0.70–1.80 mm for flattening operations. |
| Band Color | Translucent, golden or other requested colors. |
| Average Empty Spool Weight | Approximately 35 kg according to the current product information. |
Defined wire dimensions: 0.58 mm × 0.75 mm flattened wire section.
167 wires per band: Individual flattened wires are aligned into a continuous production band.
Galvanized option: Listed tensile strength of 950–1050 N/mm².
Copper-coated option: Listed tensile strength of 540–750 N/mm².
Industrial wire-band construction: Designed as semi-finished material for fastener manufacturing.
Corrugated cardboard separation: Used between wire-band layers to increase pressure-bearing capacity during handling.
Protective packing: Removable plastic foam and adhesive tape can be used around the outside layer.
Wooden wheel packing: The listed 0.58 × 0.75 × 167 configurations are supplied on wooden wheels.
The 0.58 × 0.75 × 167 wire band is supplied as semi-finished material for professional fastener production. The correct coating and tensile-strength version should be selected according to the finished fastener and forming equipment.
Industrial staple manufacturing for furniture, upholstery and general fastening products.
Office staple manufacturing for paper-fastening products.
Brad nail manufacturing for compatible woodworking and trim fasteners.
Pin nail manufacturing for compatible pin-fastener production.
Fastener production for packaging, construction and related industrial applications.
If 0.58 × 0.75 × 167 does not match the existing staple-making equipment, KYA lists additional wire-band configurations within the same product range.
| Width × Thickness × Pcs | Listed Tensile Strength | Coating | Packing |
|---|---|---|---|
| 0.65 × 0.95 × 125 | 950–1050 N/mm² | Galvanized | Wooden Wheel |
| 1.00 × 1.25 × 100 | 950–1050 N/mm² | Galvanized | Wooden Wheel |
| 1.37 × 1.59 × 72 | 950–1050 N/mm² | Galvanized | Wooden Wheel |
| 0.41 × 0.51 × 209 | 950–1050 N/mm² | Galvanized | Wooden Wheel |
For replacement wire band, compare the complete wire-band specification rather than selecting only by the finished staple name. The wire dimensions and mechanical properties must match the requirements of the staple-making equipment.
| Information to Confirm | Details to Provide |
|---|---|
| Wire Band Size | For this product: 0.58 × 0.75 × 167. |
| Tensile Strength | 950–1050 N/mm² galvanized or 540–750 N/mm² copper-coated. |
| Coating | Galvanized, copper-coated or other required material option. |
| Finished Fastener | Staple, brad or pin model and dimensional specification. |
| Production Equipment | Staple-making machine model or current wire-band specification when available. |
| Required Quantity | Required purchasing quantity for quotation and production planning. |
Send Your Wire Band Requirements
The listed 0.58 × 0.75 × 167 wire band is packed on a wooden wheel. Corrugated cardboard is placed between wire-band layers to increase pressure-bearing capacity during storage, handling and transportation.
The outside layer can be protected with removable plastic foam and adhesive tape. The current product information lists an average empty spool weight of approximately 35 kg.
Standard or customer-specific packaging and band-color requirements can be discussed when confirming an industrial order.
KYA lists the product as Width × Thickness × Pcs. The figures identify the nominal flattened-wire dimensions and the 167 individual wires arranged in the continuous band.
The listed galvanized 0.58 × 0.75 × 167 configuration has a tensile-strength range of 950–1050 N/mm².
The listed copper-coated 0.58 × 0.75 × 167 configuration has a tensile-strength range of 540–750 N/mm².
It is designed as semi-finished wire material for manufacturing staples, brad nails and pin nails. Compatibility depends on the finished fastener specification and forming equipment.
Yes. Galvanized 0.58 × 0.75 × 167 wire band is one of the listed configurations, with tensile strength of 950–1050 N/mm².
Yes. Copper-coated 0.58 × 0.75 × 167 wire band is listed with tensile strength of 540–750 N/mm².
Stainless steel wire is referenced within the broader KYA staple wire band range. Confirm the stainless steel grade, dimensions and mechanical properties required for the intended finished fastener before ordering.
The listed product uses wooden wheel packing. Corrugated cardboard separates the wire-band layers, with removable plastic foam and adhesive tape available as protective outer packing.
Provide the required Width × Thickness × Pcs specification, tensile strength, coating, finished staple or brad specification, production-machine information and purchasing quantity whenever available.
KYA supplies staple wire band to staple manufacturers, brad and pin producers, fastener distributors and professional industrial buyers. The featured 0.58 × 0.75 × 167 specification is available in the listed galvanized and copper-coated configurations.
KYA's current public product information states more than 20 years of industry experience, SGS-certified production, exports to more than 50 countries and a listed shipping lead time of 20–30 days from Qingdao.
For specification matching or bulk purchasing, provide your required 0.58 × 0.75 × 167 configuration, tensile strength, coating, finished fastener information and purchasing quantity.
