| Finish: | |
|---|---|
| Quantity: | |
KYA 15 Gauge 34 Degree DA Angle Finish Nails in 1-3/4 inch / 45mm length are designed for professional finish carpentry, cabinetry, molding, baseboards, door and window trim, furniture manufacturing, and other woodworking applications requiring a strong but relatively discreet finish fastener.
The DA45 uses a 15 gauge / approximately 1.76mm wire profile, 3.1mm head width, chisel point, and 34° angled strip configuration. Galvanized and 304 stainless steel options are available within the KYA DA Series for different corrosion-resistance requirements.
Each strip contains 100 nails, with 4,000 nails per box. The 34° DA configuration is designed for compatible 15 gauge DA-style angled finish nailers. Always verify nail angle, gauge, length, and strip geometry against the nailer manufacturer's specification before use.
| Specification | DA45 Details |
|---|---|
| Product Type | DA Style Angled Finish Nail |
| Model | DA/45 |
| Gauge | 15 Gauge |
| Length | 45mm / 1-3/4 in. |
| Collation Angle | 34° |
| Collation | DA Series Angled Strip |
| Head Width | 3.1mm / 0.122 in. |
| Wire Width | 1.76mm / 0.069 in. |
| Wire Thickness | 1.76mm / 0.069 in. |
| Point Type | Chisel Point |
| Shank Options | Smooth / Ring options within the DA Series |
| Finish Options | Galvanized / 304 Stainless Steel |
| Nails per Stick | 100 pcs |
| Nails per Box | 4,000 pcs |
| Boxes per Carton | 4 |
| Cartons per Pallet for DA45 | 80 |
The exact fastener must match the nailer's 15 gauge DA specification, 34° strip angle, supported nail length, and magazine geometry. A similar-looking 15 gauge finish nail should not automatically be treated as interchangeable.
Request DA45 PricingThe 34° DA strip format is designed for compatible angled finish nailers. The angled magazine configuration helps suitable DA nailers reach corners and confined trim locations more easily than many straight-magazine systems.
The 15 gauge wire profile provides greater fastening strength than thinner 16 gauge, 18 gauge, or 23 gauge finishing fasteners in many trim, cabinet, and furniture applications.
The DA45 provides a mid-range 45mm fastening length for molding, baseboards, cabinet components, furniture parts, and decorative trim where shorter DA nails may not provide sufficient penetration.
The chisel point supports clean penetration into suitable wood substrates during trim and finish fastening.
Galvanized DA nails are suited to many normal interior woodworking applications. 304 stainless steel variants provide increased corrosion resistance for environments where moisture resistance is more important. Select the finish according to the actual service environment.
Smooth-shank DA nails support clean driving for general finishing work. Ring-shank variants are available within the KYA DA family where additional withdrawal resistance is required. Confirm the required shank before ordering.
In addition to the DA45 1-3/4 inch size, KYA's 15 gauge DA Series covers lengths from 25mm / 1 inch to 64mm / 2-1/2 inches.
| Item | Length | Nails / Stick | Nails / Box | Boxes / Carton | Cartons / Pallet |
|---|---|---|---|---|---|
| DA/25 | 25mm / 1" | 100 | 4,000 | 4 | 120 |
| DA/32 | 32mm / 1-1/4" | 100 | 4,000 | 4 | 120 |
| DA/38 | 38mm / 1-1/2" | 100 | 4,000 | 4 | 90 |
| DA/45 | 45mm / 1-3/4" | 100 | 4,000 | 4 | 80 |
| DA/50 | 50mm / 2" | 100 | 4,000 | 4 | 60 |
| DA/57 | 57mm / 2-1/4" | 100 | 4,000 | 4 | 60 |
| DA/64 | 64mm / 2-1/2" | 100 | 4,000 | 4 | 60 |
KYA lists the DA fastener family for DA-style systems including SENCO DA/UA, Duo-Fast DA, FASCO BA, MXA NF15, Holzher, PREBENA DA, and Spotnails 15GAB.
These names should be treated as cross-reference families rather than a guarantee that every tool model accepts every DA Series length. Confirm the nailer's required gauge, angle, nail length, head profile, and collation format before bulk use.
DA and FN nails are both commonly found in 15 gauge angled finish nail systems, but they use different collation geometry and should not be assumed interchangeable.
| Feature | DA Style | FN Style |
|---|---|---|
| Typical Gauge | 15 Gauge | 15 Gauge |
| Typical Collation Angle | Approximately 34° | Approximately 25° |
| Typical Use | Finish and trim work | Finish and trim work |
| Interchangeable? | No. Use the fastener style specified for the nailer. | |
If a nailer specifies 34° DA Series fasteners, do not substitute a 25° FN strip based only on the fact that both nails are 15 gauge.
DA45 finish nails can be used for suitable baseboard, decorative trim, and interior finishing applications where a 45mm fastener provides the required penetration.
The angled DA format helps compatible nailers access molding installations and tighter positions while the 15 gauge fastener provides useful holding strength.
Cabinet shops can use 15 gauge finish nails for suitable face frames, trim components, decorative panels, and other non-structural wood assemblies.
1-3/4 inch DA nails can be selected for door and window casing where the combined trim and substrate thickness suits a 45mm fastener.
Applications include furniture frames, decorative wood parts, panel attachment, and other production work requiring a stronger finish fastener than a thinner brad.
DA finish nails can also be used in compatible picture-frame, display, and decorative wood assemblies where their dimensions and holding requirements are appropriate.
| Feature | Galvanized | 304 Stainless Steel |
|---|---|---|
| Material / Finish | Steel with galvanized protection | 304 stainless steel |
| Corrosion Resistance | Suitable for many normal interior conditions | Higher resistance in moisture-sensitive conditions |
| Typical Applications | Interior trim, furniture, cabinets | Selected moisture-exposed trim and woodworking |
| Selection | Choose according to substrate, environmental exposure, and project corrosion requirements. | |
| Fastener | Relative Wire Size | Typical Use |
|---|---|---|
| 15 Gauge Finish Nail | Heavier | Baseboards, molding, cabinets, door/window casing, and furniture |
| 16 Gauge Finish Nail | Medium | General trim, paneling, molding, and furniture |
| 18 Gauge Brad Nail | Finer | Light trim, decorative work, and smaller wood components |
The correct gauge depends on material thickness, required holding strength, visible fastener size, and the nailer being used.
Nail length should be selected according to the thickness of the trim or workpiece, the receiving substrate, and the required penetration.
| DA Length | General Selection Consideration |
|---|---|
| 25–32mm | Lighter or thinner finish components |
| 38–45mm | General trim, molding, cabinets, and furniture components |
| 50–64mm | Thicker trim and assemblies requiring greater penetration |
These are general selection guidelines only. Test the selected nail in the actual wood and confirm the required fastening performance before production use.
They are commonly used for baseboards, crown molding, door and window casing, cabinets, furniture, decorative trim, and other finish carpentry applications.
DA-style 15 gauge finish nails use an approximately 34-degree angled strip configuration.
Yes. KYA DA/45 is 45mm / approximately 1-3/4 inches.
No. DA and FN are different angled finish-nail systems. DA nails are typically around 34°, while FN nails are typically around 25°. Use the style specified for your nailer.
Do not substitute an FN-style 25° strip for a DA-style 34° strip unless the tool manufacturer specifically confirms compatibility.
KYA lists a nominal head width of 3.1mm / 0.122 inch for this DA Series.
The KYA DA45 packing specification lists 100 nails per stick and 4,000 nails per box.
The KYA 15 gauge DA family includes 25, 32, 38, 45, 50, 57, and 64mm lengths, covering approximately 1 inch through 2-1/2 inches.
KYA lists galvanized and 304 stainless steel options within the DA Series. Select the material according to the required corrosion resistance and service environment.
KYA lists both smooth and ring-shank options within its DA family. Confirm the exact shank configuration required before ordering.
DA Series nails are intended for compatible 15 gauge 34° angled finish nailers. KYA lists cross-reference systems including SENCO DA/UA, Duo-Fast DA, FASCO BA, PREBENA DA, and Spotnails 15GAB. Verify the exact tool model and accepted nail length before use.
Yes. Crown molding is a common application for 15 gauge angled finish nails. Select the nail length according to molding thickness and the receiving substrate.
Yes. DA45 nails can be used for suitable cabinet, trim, and furniture applications where a 45mm 15 gauge fastener provides the required penetration and holding performance.
Provide the required length, finish, shank type, nailer model if relevant, quantity, destination market, and packaging or private-label requirements.
Contact KYA Fasteners regarding current sample availability. For distributor or production evaluation, test the nails with the intended nailer, wood substrate, and application before bulk use.
Ask About DA45 Finish NailsKYA supplies 15 gauge DA Series finish nails for fastener distributors, pneumatic-tool distributors, furniture factories, cabinet manufacturers, trim manufacturers, woodworking companies, and other professional buyers.
For quotations on 15 gauge 34° DA45 1-3/4 inch finish nails, provide the required finish, shank type, quantity, destination market, tool reference, and packaging requirements.
Request a Bulk Quote View More Finish Nails
