| Finish: | |
|---|---|
| Leg Length: | |
| Shank: | |
| Quantity: | |
KYA CP-C852W7 plastic collated concrete coil nails are designed for high-pressure direct-fastening applications into suitable concrete and related mineral substrates. The current KYA specification lists a 50mm nail length, approximately 0.150" shank diameter, smooth shank construction and plastic collation.
The fasteners are supplied in 50-pin coils for use with compatible high-pressure concrete nailers. KYA identifies the CP-C852W7 for MAX HN120-type applications; buyers should confirm the exact nailer model, accepted pin dimensions and required base material before ordering.
This page focuses on the CP-C852W7 concrete nail. Other MAX-style fastener families such as CP-W, CAP and CCP use different shank designs, diameters and intended substrates and should not be treated as interchangeable.
| Product Type | Plastic Collated Concrete Coil Nail |
| Model | CP-C |
| Product Code | KYA-CP-C852W7 |
| Item | CP-C852W7 |
| Nominal Length | 50mm / 2" |
| Published Shank Diameter | 0.150" / approximately 3.68mm |
| Shank Type | Smooth Shank |
| Collation | Plastic Collated Coil |
| Pins per Coil | 50 |
| Case Quantity | 1,000 pins |
| Listed Finish Options | Galvanized / Mechanical Galvanized / Hot-Dip Galvanized / Phosphated Steel |
| Reference Tool | MAX HN120 High-Pressure Concrete / Steel Pinner |
| Primary Application | Direct fastening into suitable concrete and related substrates |
Plastic collation holds the pins in a compact coil for automatic feeding through a compatible high-pressure concrete nailer. Fifty fasteners are arranged per coil, matching the loading capacity used by the MAX HN120 fastening platform.
The CP-C852W7 shown on this page has a nominal 50mm length. Nail length should be selected according to the thickness of the attached component, required embedment and the base material.
KYA currently lists the CP-C852W7 with an approximately 0.150" / 3.68mm shank. Because high-pressure concrete nail systems use closely controlled pin dimensions, buyers replacing another manufacturer's fastener should compare the exact shank diameter rather than relying only on the CP-C series designation.
The current KYA product attributes specify a smooth shank. Smooth concrete pins are widely used in direct-fastening systems where penetration and holding behavior are determined by the complete pin geometry, substrate and installation energy.
Plastic collation positions the nails for feeding through compatible high-pressure concrete nailers. Collation format is tool-specific and must match the magazine and feed mechanism.
Each listed coil contains 50 pins. This format corresponds to the 50-fastener loading capacity used by the MAX HN120 high-pressure concrete pinner platform.
KYA lists galvanized, mechanical galvanized, hot-dip galvanized and phosphated steel options within the product range. Confirm the finish available for the exact CP-C852W7 configuration when requesting a quotation.
KYA currently lists multiple CP-C lengths within this product family. The exact product shown on this page is CP-C852W7 at 50mm.
| Item | Nominal Length | Collation | Pins / Coil | Case Qty. |
|---|---|---|---|---|
| CP-C825W7 | 25mm / 1" | Plastic | 50 | 1,000 |
| CP-C832W7 | 32mm / 1-1/4" | Plastic | 50 | 1,000 |
| CP-C838W7 | 38mm / 1-1/2" | Plastic | 50 | 1,000 |
| CP-C852W7 | 50mm / 2" | Plastic | 50 | 1,000 |
Do not assign a substrate solely from nail length. Concrete strength, attached material thickness, required embedment and the nailer manufacturer's fastener recommendations must also be considered.
CP-C concrete nails are intended for direct-fastening work with compatible high-pressure equipment. The exact application depends on the selected pin, base material and approved tool configuration.
Wood components to suitable concrete
Plywood to suitable concrete
Furring strips to concrete
Selected building components to concrete
Construction and renovation direct fastening
Applications using compatible MAX HN120-type high-pressure fastening equipment
For fastening directly into steel, use only a fastener configuration specifically intended for the steel thickness and tool system involved. Do not assume that every CP-C nail is interchangeable with CP-W or CAP steel-fastening pins.
MAX HN120-type fastening systems use several different fastener families. They differ in shank geometry, diameter and intended base material. Selecting the correct family is important for tool performance and fastening reliability.
| Fastener Family | Typical Application | Selection Note |
|---|---|---|
| CP-C | Concrete direct fastening | Multiple CP-C diameters and configurations exist; confirm exact pin specification |
| CP-W | High-strength concrete and selected steel applications | Uses specific step-shank / hardened configurations depending on item |
| CAP | Wood or plywood to steel | Select according to steel thickness and wood thickness |
| CCP | Wood or plywood to concrete | Used with concrete within the applicable strength range for the fastener system |
These families should not be substituted solely because they fit the same nailer. The selected fastener must match the intended substrate and application.
The MAX HN120 is a high-pressure pneumatic concrete and steel pinner designed for a range of collated fasteners. MAX publishes applications including wood to concrete, wood to steel, metal track to concrete and metal track to steel, with different fastener series specified for each application.
KYA lists the CP-C852W7 for HN120-type use. Before replacing an original MAX fastener, compare the exact pin diameter, nail length, head geometry and plastic collation with the tool and current fastener specification.
| Reference Tool | MAX HN120 PowerLite High-Pressure Concrete / Steel Pinner |
| Tool Loading Capacity | 50 nails |
| KYA Product | CP-C852W7 |
| KYA Published Length | 50mm / 2" |
| KYA Published Shank | 0.150" / approximately 3.68mm |
| Collation | Plastic Coil |
| Before Ordering | Confirm tool model, nail diameter, nail length, collation and intended base material |
Performance limits such as maximum concrete compressive strength or maximum steel thickness belong to a specific fastener and tool combination. They should not be applied to every HN120-compatible pin.
For example, MAX publishes different substrate limits for CP-W, CAP and CCP families. CP-W hardened pins are intended for more demanding concrete or steel applications, while CAP and CCP are intended for different base materials. The selected pin must therefore match the actual substrate.
For the KYA CP-C852W7, confirm the required concrete strength, embedment and installation conditions before specifying the fastener for a project.
Start by identifying the material being attached and the base material. Next, confirm the fastener family specified for the high-pressure nailer. Finally, select the pin length according to component thickness and required embedment.
Do not select a nail only because it fits physically into the magazine. A concrete pin, hardened steel pin and wood-to-steel pin can have different metallurgy and shank geometry even when used in the same HN120 platform.
For accurate product matching and quotation, provide the required quantity, high-pressure nailer manufacturer and model, base material, attached material thickness, required nail length, finish and delivery destination.
For this product, reference KYA-CP-C852W7 and specify 50mm / 2" plastic collated smooth shank concrete coil nails.
| Product Code | KYA-CP-C852W7 |
| Item | CP-C852W7 |
| Nominal Length | 50mm / 2" |
| Published Shank Diameter | 0.150" / approximately 3.68mm |
| Shank Type | Smooth |
| Collation | Plastic Coil |
| Pins / Coil | 50 |
| Case Quantity | 1,000 pins |
| Reference Tool | MAX HN120-type high-pressure concrete nailer |
| Inquiry Information | Quantity, tool model, substrate, attached material, finish and destination |
KYA currently lists the CP-C852W7 as a 50mm / 2" plastic collated concrete nail with an approximately 0.150" / 3.68mm shank.
The listed configuration contains 50 pins per coil.
KYA lists 1,000 pins per carton for the CP-C852W7 configuration.
KYA lists this product for HN120-type high-pressure nailers. Before ordering as a replacement for an original MAX fastener, compare the exact nail diameter, length, head geometry and plastic collation with the tool specification.
MAX states that the HN120 accepts pins up to 2-1/2" for concrete applications and up to 2" for steel applications, depending on the fastener family.
No. These are different high-pressure fastener families. CP-W, CAP, CCP and CP-C products use different pin geometries and are intended for different base materials and fastening conditions.
Do not assume that every CP-C configuration is suitable for direct steel fastening. MAX uses specific pin families for different steel and concrete applications. Confirm the steel thickness and required fastener type before use.
Concrete suitability depends on concrete strength, pin geometry, embedment and tool setup. The high-strength concrete ratings published for specific CP-W products should not automatically be applied to CP-C852W7.
KYA currently lists galvanized, mechanical galvanized, hot-dip galvanized and phosphated steel options within this CP-C product range. Confirm availability for CP-C852W7 when ordering.
Provide the quantity, high-pressure nailer manufacturer and model, base material, attached material thickness, required finish and delivery destination. Reference KYA-CP-C852W7 for this 50mm plastic collated configuration.
