| Finish: | |
|---|---|
| Quantity: | |
KYA 15 Gauge DA Finish Nails are 34-degree angled collated nails designed for professional finish carpentry, trim, molding, cabinetry and furniture production. The DA Series uses a 1.76mm shank, approximately 3.1mm head width and lengths from 25mm to 64mm.
The nails are glue collated in strips of 100 pieces and use a chisel point for controlled penetration into suitable wood materials. Galvanized and stainless steel options are available for different installation and corrosion-resistance requirements.
KYA lists compatibility with DA-type finish nailers including Senco DA, Duo-Fast DA, Fasco BA, Prebena DA and Spotnails 15GAB systems. Confirm the exact nailer model, 34-degree DA format and supported nail-length range before ordering.
| Specification | Details |
| Product | 15 Gauge DA Angled Finish Nails |
| Gauge | 15 Gauge |
| DA Angle | 34° |
| Head Width | Approx. 3.1mm |
| Shank Width | 1.76mm |
| Shank Thickness | 1.76mm |
| Length Range | 25mm–64mm / 1"–2-1/2" |
| Collation | Glue Collated |
| Nails per Stick | 100 pcs |
| Point Type | Chisel Point |
| Surface / Material Options | Galvanized Steel, Stainless Steel Option |
| Typical Packaging | 4,000 pcs per box |
| Referenced Compatible Systems | Senco DA, Duo-Fast DA, Fasco BA, Prebena DA, Spotnails 15GAB |
| Applications | Trim, Baseboards, Crown Molding, Cabinetry, Furniture, Door and Window Casing, Decorative Woodwork |
DA-style angled finish nails should be matched to the exact nailer specification. Confirm the nailer angle, gauge, magazine type and supported nail-length range before replacing an existing fastener.
The KYA 15 Gauge DA Series is available from 25mm to 64mm. Each collated stick contains 100 nails, and the listed standard box quantity is 4,000 nails.
| Model | Length (mm) | Length (inch) | Pcs/Stick | Pcs/Box | Boxes/Carton | Cartons/Pallet |
|---|---|---|---|---|---|---|
| DA/25 | 25mm | 1" | 100 | 4,000 | 4 | 120 |
| DA/32 | 32mm | 1-1/4" | 100 | 4,000 | 4 | 120 |
| DA/38 | 38mm | 1-1/2" | 100 | 4,000 | 4 | 90 |
| DA/45 | 45mm | 1-3/4" | 100 | 4,000 | 4 | 80 |
| DA/50 | 50mm | 2" | 100 | 4,000 | 4 | 60 |
| DA/57 | 57mm | 2-1/4" | 100 | 4,000 | 4 | 60 |
| DA/64 | 64mm | 2-1/2" | 100 | 4,000 | 4 | 60 |
The DA Series uses an angled strip configuration intended for compatible 15 gauge DA finish nailers. The angled magazine format can improve tool access when fastening around cabinet interiors, molding profiles, door frames, corners and other confined finish-carpentry locations.
DA nails should not be confused with straight 15 gauge, FN-style or other angled finish-nail families. Always match the fastener series and angle to the nailer's specified magazine system.
The KYA DA Series uses an approximately 1.76mm wide and 1.76mm thick 15 gauge shank. This heavier wire profile makes 15 gauge finish nails suitable for substantial trim and woodworking components where more holding capability is required than with smaller 18 gauge brad nails.
Material density, edge distance, nail length and tool depth should still be considered carefully. Test the selected fastener in delicate, narrow or split-prone trim before repetitive installation.
The approximately 3.1mm head provides bearing area for fastening molding, trim and cabinet components while remaining significantly smaller than the head of a general construction nail.
For visible finish work, set the nail to the required depth using the nailer's depth adjustment. Depending on the required finish appearance, the driven head can then be filled and finished with the surrounding wood surface.
KYA 15 Gauge DA Finish Nails use a chisel point designed for controlled penetration into suitable wood materials.
Correct nailer orientation, adequate edge distance and appropriate nail length are important when working with narrow trim or harder wood. Test fastening conditions when splitting, deflection or visible surface damage is a concern.
The nails are glue collated into strips for loading into compatible DA finish nailer magazines. Each listed KYA strip contains 100 nails.
Keep nail strips dry and protected from impact during storage and handling. Damaged or deformed collation can affect magazine feeding even when the individual nail dimensions are correct.
KYA lists galvanized and stainless steel options for the 15 Gauge DA Series. Galvanized nails provide corrosion protection for suitable general finish and woodworking applications.
A stainless steel option is available where greater corrosion resistance is required. For exterior, coastal, chemically exposed or moisture-sensitive installations, confirm the exact fastener material and corrosion requirement before ordering.
KYA lists the DA Series for use with compatible finish nailers from Senco, Duo-Fast, Fasco, Prebena and Spotnails.
| Referenced System | Compatibility Check |
|---|---|
| Senco DA | Confirm a DA-type 15 gauge angled magazine and supported nail length. |
| Duo-Fast DA | Confirm DA nail specification, magazine angle and length range. |
| Fasco BA | Confirm the exact nailer model and accepted fastener dimensions. |
| Prebena DA | Confirm DA-series compatibility and supported nail length. |
| Spotnails 15GAB | Confirm tool model, DA format and required fastener length. |
Other DA-type 15 gauge angled finish nailers may use similar fasteners, but compatibility should be verified against the nailer manufacturer's specification rather than assumed from gauge alone.
15 gauge finish nails are intended for professional finish carpentry and production woodworking where a stronger finish fastener is required for suitable wood components.
Cabinet frames and cabinet components
Baseboards and substantial trim
Crown molding
Door and window casing
Furniture manufacturing
Chair rails
Decorative woodwork
Picture-frame assembly where the selected nail length is suitable
Wood paneling and cladding
Selected flooring and wood-strip fastening applications
Select nail length according to trim thickness, receiving material, required penetration and the nailer's supported range. Nail length should provide adequate engagement without creating unnecessary risk of breakthrough or interference with concealed materials.
| Length | Typical Selection Consideration |
|---|---|
| 25mm / 1" | Shorter finish work and suitable thinner components. |
| 32mm / 1-1/4" | Suitable trim and woodworking where shorter penetration is required. |
| 38mm / 1-1/2" | General cabinetry, trim and furniture applications depending on material thickness. |
| 45mm / 1-3/4" | Medium-thickness trim, cabinetry and furniture components. |
| 50mm / 2" | Baseboards, molding and substantial finish work where appropriate. |
| 57mm / 2-1/4" | Thicker trim and suitable heavier finish-carpentry components. |
| 64mm / 2-1/2" | Thicker molding and finish work requiring longer penetration when supported by the nailer and workpiece. |
The application examples above are selection guidance rather than fixed installation rules. Final length should be determined from the actual materials, joint design and project requirements.
15 gauge finish nails use a heavier shank than 18 gauge brad nails. They are commonly selected for larger molding, substantial trim, baseboards, cabinet components and furniture where greater fastening strength is required.
18 gauge brads have a smaller diameter and generally leave a smaller fastening mark, making them useful for lighter or more delicate trim. Fastener selection should consider both required holding performance and the risk of splitting or visible surface damage.
Each listed DA Series stick contains 100 finish nails and each standard box contains 4,000 nails. The number of cartons per pallet varies according to nail length.
| Model | Nails/Box | Boxes/Carton | Cartons/Pallet |
|---|---|---|---|
| DA/25 | 4,000 | 4 | 120 |
| DA/32 | 4,000 | 4 | 120 |
| DA/38 | 4,000 | 4 | 90 |
| DA/45 | 4,000 | 4 | 80 |
| DA/50 | 4,000 | 4 | 60 |
| DA/57 | 4,000 | 4 | 60 |
| DA/64 | 4,000 | 4 | 60 |
KYA supplies 15 Gauge DA Finish Nails for cabinet manufacturers, furniture factories, trim contractors, woodworking distributors and professional fastener buyers.
Custom length and finish requirements can be discussed for bulk orders. When requesting a quotation, provide the required DA size, material or finish, quantity and nailer model so the specification can be confirmed.
KYA supplies 15 Gauge DA Finish Nails from Changzhou, Jiangsu, China for professional woodworking, furniture production and finish-carpentry applications.
Available sizes range from DA25 to DA64, with galvanized and stainless steel options and standard bulk packaging for distributor and production purchasing.
Typical applications include cabinetry, baseboards, crown molding, substantial trim, door and window casing, furniture manufacturing, decorative woodworking and suitable paneling applications.
The KYA DA Series is a 34-degree angled finish-nail format designed for compatible DA-type 15 gauge finish nailers.
KYA lists the DA Series with a shank width and thickness of approximately 1.76mm.
The listed head width is approximately 3.1mm.
The available range is 25mm, 32mm, 38mm, 45mm, 50mm, 57mm and 64mm, equivalent to 1 inch through 2-1/2 inches.
KYA lists 50mm and 64mm among the options for thicker trim. The final nail length should be selected according to molding thickness, backing material, required penetration and the nailer's supported range.
Yes. The product is listed as glue collated, with 100 nails per stick.
The standard listed packaging is 4,000 nails per box.
The DA Series uses a chisel point for controlled penetration into suitable wood materials.
Yes. Galvanized nails are available for suitable general finish and woodworking applications.
Yes. KYA lists a stainless steel option. Confirm the required stainless material and service environment when corrosion resistance is critical.
KYA lists Senco DA among the referenced compatible systems. Confirm the exact Senco nailer model and supported DA nail-length range before ordering.
KYA references Duo-Fast DA, Fasco BA and Prebena DA systems. Verify the individual tool model, magazine format and supported fastener dimensions before use.
No. These are DA-style angled finish nails. A 15 gauge nailer may use another collation angle or fastener family, so the nailer specification must be checked before purchase.
15 gauge finish nails have a heavier shank and are generally selected for more substantial trim, molding, cabinetry and furniture. 18 gauge brads are thinner and are commonly used where a smaller fastening mark or reduced splitting risk is preferred.
Yes. Baseboard installation is one of the common applications for 15 gauge finish nails. Select nail length according to the baseboard thickness and receiving material.
Yes. Cabinet frames, face components and suitable decorative cabinet work are among the listed applications.
KYA lists custom length and finish options for bulk purchasing requirements. Provide the required nail size, finish, quantity and nailer model when requesting a quotation.
