18 Gauge M Series 3/8 Inchi Yopapatiza Korona Zakudya

18 Gauge M Series 3/8 Inchi Yopapatiza Korona Zakudya

18 Gauge M Series 3/8 Inch Narrow Crown Staples ndi akatswiri opapatiza akorona omwe amapangidwira makabati, macaseback, zotengera, upholstery, trim, akamaumba, lattice, underlayment, soffits, insulative sheathing, zomangira masika, ndi zomangira zamatabwa zolimba. Ndi korona wa 9.90mm / 3/8 inch, chisel point, ndi glue collation, zoyambira izi zimapereka chakudya chokhazikika, kukhazikika koyera, komanso mphamvu yodalirika yomaliza ndi matabwa.

KYA M Series yopapatiza kolona zakudya zilipo mu waya kanasonkhezereka, zitsulo zosapanga dzimbiri, ndi zotayidwa zinthu zotayidwa, ndi nthaka yokutidwa pamwamba kumaliza kukana dzimbiri. Kutalika kwake kumakwirira 10mm mpaka 40mm, kupangitsa kuti mndandandawu ukhale woyenera mafakitale amipando, opanga makabati, malo opangira upholstery, ogulitsa pansi, zopangira matabwa, ndi ogulitsa zomangira.

• 18 gauge M Series yopapatiza korona yokhazikika yomaliza ndi matabwa.

• 3/8 inchi / 9.90mm korona wokhazikika bwino.

• 1.25mm waya m'lifupi ndi 1.00mm waya makulidwe.

• 10mm–40mm / 3/8'–1-9/16' kutalika.

• Chisel point imathandizira kulowa bwino mumitengo, mipiringidzo, upholstery, ndi zida zamapulogalamu.

• Mizere yophatikizidwa ndi glue imathandizira kuchepetsa kupanikizana kwa zida ndikuwongolera kufulumira.

       Pemphani Mawu    

M Series Narrow Crown Staples Mafotokozedwe

Ogula akuyenera kutsimikizira kuti staple gauge, kukula kwa korona, m'lifupi mwa waya, makulidwe a waya, kutalika kwa mwendo, zinthu, kumaliza kwa pamwamba, mtundu wa mfundo, kuphatikana, kuyika, ndi kuyanjana kwa stapler musanayitanitsa. Zotsatirazi zikugwira ntchito ku 18 Gauge M Series 3/8 Inch Narrow Crown Staples.

Malingaliro	Tsatanetsatane
Kanthu	18 Gauge M Series 3/8 Inchi Yopapatiza Korona Zakudya
Gauge	18 Gauge
Mtundu wa Fastener	Zovala zazifupi za korona
Zakuthupi	Waya wagalasi, chitsulo chosapanga dzimbiri, aluminiyamu
Kumaliza Pamwamba	Zinc yopangidwa
Korona	9.90mm / 3/8 inchi
Waya M'lifupi	1.25mm / 0.049 inchi
Waya Makulidwe	1.00mm / 0.039 inchi
Utali Wautali	10mm–40mm / 3/8'–1-9/16'
Lozani	Chisel point
Collation	Glue anaphatikizana
Zida Zogwirizana	PREBENA G, FASCO SG, KIHLBERG 782, NIKEMA G4450, OMER SG44, SENCO M, SPOTNAILS 68, DUOFASST W18

Tsatanetsatane Pakuyika kwa M Series Staples

Zotsalira za M Series zimaperekedwa mumiyendo ingapo kuyambira 10mm mpaka 40mm. Mzere uliwonse uli ndi zoyambira 100, ndipo bokosi lililonse lili ndi zoyambira 5,000. Kuchuluka kwa makatoni kumasintha ndi kutalika kwake kuti zithandizire kusungirako kotetezeka, kutumiza, ndi kugawa zinthu.

Utali	Wachinthu (mm)	Utali (inchi)	Malo	Omaliza	Ma PC/Ndodo	Ma PC/Mabokosi/Mabokosi	/Ctn	Ctns/Pallet
M/10	10 mm	3/8'	Chisele	Zokhala ndi malata	100 ma PC	5,000 ma PC	10 mabokosi	40
M/12	12 mm	1/2 '	Chisele	Zokhala ndi malata	100 ma PC	5,000 ma PC	10 mabokosi	40
M/16	16 mm	5/8'	Chisele	Zokhala ndi malata	100 ma PC	5,000 ma PC	10 mabokosi	40
M/19	19 mm pa	3/4'	Chisele	Zokhala ndi malata	100 ma PC	5,000 ma PC	10 mabokosi	40
M/20	20 mm	13/16'	Chisele	Zokhala ndi malata	100 ma PC	5,000 ma PC	10 mabokosi	40
M/22	22 mm	7/8'	Chisele	Zokhala ndi malata	100 ma PC	5,000 ma PC	10 mabokosi	40
M/25	25 mm	1'	Chisele	Zokhala ndi malata	100 ma PC	5,000 ma PC	10 mabokosi	40
M/28	28 mm	1-1/8'	Chisele	Zokhala ndi malata	100 ma PC	5,000 ma PC	10 mabokosi	40
M/30	30 mm	1-3/16'	Chisele	Zokhala ndi malata	100 ma PC	5,000 ma PC	5 bokosi	40
M/32	32 mm	1-1/4'	Chisele	Zokhala ndi malata	100 ma PC	5,000 ma PC	5 bokosi	40
M/35	35 mm	1-3/8'	Chisele	Zokhala ndi malata	100 ma PC	5,000 ma PC	5 bokosi	40
M/38	38 mm pa	1-1/2'	Chisele	Zokhala ndi malata	100 ma PC	5,000 ma PC	5 bokosi	40
M/40	40 mm	1-9/16'	Chisele	Zokhala ndi malata	100 ma PC	5,000 ma PC	5 bokosi	40

Zofunika Kwambiri za M Series Narrow Crown Staples

M Series 3/8 inchi zopapatiza zopapatiza za korona zimapangidwira kukhazikika kokhazikika, mawonekedwe oyera apamwamba, komanso magwiridwe antchito odalirika pomaliza ma staplers. Mapangidwe awo opapatiza a korona amathandizira kuchepetsa zomangira zowoneka bwino mu trim, makabati, upholstery, ndi ntchito zamatabwa.

• Kupanga zitsulo kumapereka kukhazikika komanso kugwira mphamvu.

• Chisel point imathandizira kulowa bwino komanso kodalirika.

• Kuphatikizika kwa glue kumathandizira kuchepetsa kupanikizana kwa zida ndikuwongolera kukhazikika kwa chakudya.

• Electro-galvanized finish imathandizira kukana kwa dzimbiri kwa mkati ndi ntchito zouma zosankhidwa.

• Zosankha zazinthu zingapo zimathandizira malo osiyanasiyana okhazikika komanso zofunikira za polojekiti.

• Korona wa 3/8 inchi ndi woyenera makabati, chepetsa, upholstery, underlayment, ndi kumangirira okhudzana ndi pansi.

Mapulogalamu a M Series Narrow Crown Staples

18 Gauge M Series Narrow Crown Staples amagwiritsidwa ntchito popanga mipando, kukonza kabati, kumangirira upholstery, kumalizitsa mkati, pansi, pansi, kuyika pansi, ntchito yochepetsera, ndi kupanga matabwa. Ndioyenera kwa ogawa, mafakitale amipando, malo ochitirako upholstery, mashopu a makabati, oyika pansi, ndi ogulitsa zida zomangira.

• Makabati ndi ma casebacks.

• Zojambula ndi upholstery.

• Spring attachment ndi insulative sheathing.

• Underlayment ndi soffits.

• Kuumba, kudula, lattice, ndi matabwa olimba.

• Mkati kumaliza ndi kuwala matabwa ntchito.

       Pezani Mtengo Wocheperako wa Korona    

Chiwonetsero cha Kanema cha M Series Narrow Crown Staples

Onerani vidiyoyi kuti mudziwe zambiri za ma staples opapatiza, mitundu yoyambira, komanso kugwiritsa ntchito zomangira.

Momwe Mungasankhire M Series Narrow Crown Staples

Ogula ayenera kusankha M Series yopapatiza kolona zoyambira malinga ndi kukula kwa korona, gauge, waya m'lifupi, makulidwe a waya, kutalika kwapatali, zakuthupi, kutha kwa pamwamba, mtundu wa mfundo, kulumikizana kwa zida, ndi zinthu zomangira. Pazinthu zazikulu za M Series, makiyi ofunikira ndi 18 geji yokhala ndi korona wa 3/8 inchi / 9.90mm.

a Selection Factor	Malangizo
Kukula kwa Korona	Sankhani zotsalira za M Series pomwe chidacho chimafuna 3/8 inchi / 9.90mm yopapatiza korona.
Kutalika kwa Miyendo	Sankhani kutalika kwa mwendo wa 10mm-40mm molingana ndi makulidwe azinthu, kugwirizira kuya, ndi zofunika kumaliza.
Zakuthupi	Gwiritsani ntchito mawaya opangira malata kuti mugwiritse ntchito nthawi zonse, chitsulo chosapanga dzimbiri polimbana ndi dzimbiri, ndi aluminiyumu popepuka kapena mwapadera.
Mtundu wa Point	Sankhani zitsulo za chisel point kuti mulowe bwino mumatabwa, upholstery, mapanelo, chepetsa, ndi zipangizo zapansi.
Chida Kugwirizana	Tsimikizirani kuti ikugwirizana ndi PREBENA G, FASCO SG, KIHLBERG 782, NIKEMA G4450, OMER SG44, SENCO M, SPOTNAILS 68, kapena DUOFASST W18.

Chifukwa Chosankha KYA M Series Narrow Crown Staples

KYA Fasteners imapereka zinthu zocheperako za korona, mawaya abwino, mawaya apakatikati, misomali ya upholstery, misomali ya brad, misomali ya coil, mphete za nkhumba, ma pneumatic staplers, ndi njira zotsatsira kwa omwe amagawa padziko lonse lapansi, mafakitale amipando, malo opangira upholstery, opanga makabati, pansi, opanga zida zomangira, ogulitsa matabwa.

• 18 gauge M Series yopapatiza korona yokhazikika yokhala ndi 3/8 inchi korona.

• Kutalika kumayambira 10mm mpaka 40mm pazomaliza zingapo.

• Galvanized, chitsulo chosapanga dzimbiri, ndi zosankha za aluminiyamu.

• Zopangira zomatira zopangira chakudya chokhazikika komanso kuchepetsa kupanikizana kwa zida.

• Thandizo la maoda ambiri, kugawa kwaogawa, madongosolo a zitsanzo, ndi ma CD OEM.

       Lumikizanani ndi KYA Fasteners    

Mafunso Okhudza 18 Gauge M Series Narrow Crown Staples

Kodi M Series Narrow Crown Staples amagwiritsidwa ntchito chiyani?

Amagwiritsidwa ntchito ngati makabati, ma casebacks, ma drawer, upholstery, ma spring attachment, insulative sheathing, underlayment, soffits, mold, trim, lattice, hardwood floors, and lightworking applications.

Ndi zida ziti zomwe zimagwirizana ndi M Series Staples?

Zida zomwe zimagwirizana ndi PREBENA G, FASCO SG, KIHLBERG 782, NIKEMA G4450, OMER SG44, SENCO M, SPOTNAILS 68, ndi DUOFASST W18.

Kodi kukula kwa korona kwa M Series Staples ndi kotani?

Kukula kwa korona ndi 9.90mm / 3/8 inchi, yomwe idapangidwa kuti ikhale yofananira ndi 18 gauge yopapatiza korona staplers.

Ndi kutalika kotani komwe kulipo kwa M Series Staples?

Kutalika komwe kulipo kumayambira 10mm mpaka 40mm, kuphatikiza M/10, M/12, M/16, M/19, M/20, M/22, M/25, M/28, M/30, M/32, M/35, M/38, ndi M/40.

Kodi M Series Staples imalimbana ndi dzimbiri?

Inde. Zinc yokutidwa kapena malata imapereka kukana kwa dzimbiri kwa ntchito zambiri zamkati ndi zosankhidwa zowuma. Zida zachitsulo zosapanga dzimbiri zitha kusankhidwa kuti zizitha kukana dzimbiri.

N'chifukwa chiyani mumagwiritsa ntchito mfundo zopapatiza za glue?

Kuphatikizika kwa zomatira kumapangitsa kuti zinthuzo zikhale zogwirizana m'mizere, kumathandizira kukhazikika kwa chakudya, kuchepetsa kupanikizana kwa zida, ndikuthandizira kumangirira bwino mu upholstery, trim, cabinet, ndi kumaliza ntchito.

Ndi zakudya zingati zomwe zapakidwa mubokosi lililonse?

Bokosi lililonse lili ndi zoyambira 5,000, ndipo mzere uliwonse uli ndi zoyambira 100. Kutengera kutalika kwa katoni, katoni iliyonse imakhala ndi mabokosi 5 kapena 10.

Ndani ayenera kugula 18 Gauge M Series Staples zambiri?

Ogula mochulukira akuphatikizapo ogulitsa ma fastener, ogulitsa zida, mafakitale amipando, malo opangira upholstery, opanga makabati, makontrakitala a trim, ogulitsa pansi, opanga matabwa, ndi ogulitsa zinthu zomanga.

       Pemphani Mawu