The KYA CN565X pneumatic coil siding nailer is designed for professional siding, sheathing, fencing, subflooring, roof decking, exterior trim and other construction fastening applications. It accepts both 15° flat wire-welded coil nails and 15° flat plastic-sheet collated nails, giving distributors and contractors flexibility across different coil nail formats.
The CN565X supports plastic-sheet collated nails from 32–65 mm (1-1/4"–2-1/2") and wire-welded coil nails from approximately 45–65 mm (1-3/4"–2-1/2"). Compatible shank diameters are approximately 2.3–2.5 mm (.092"–.099"), with smooth, ring and screw shank configurations available within the specified range.
Dual collation compatibility: accepts both flat wire-welded and flat plastic-sheet collated coil nails.
Up to 65 mm nail length: designed for professional siding and construction fastening requiring nails up to 2-1/2".
225–300 nail capacity: high-capacity magazine reduces reloading during repetitive fastening.
2.3–2.5 mm shank range: compatible with approximately .092"–.099" diameter nails.
Smooth, ring and screw shanks: supports multiple nail configurations for different wood and construction applications.
Adjustable driving depth: allows nail depth to be matched to the material and application.
Anti-double-fire mechanism: designed to improve control during professional fastening operations.
Aluminum body: durable housing for construction and industrial use.
Surface-protection nose design: helps reduce marking when working with suitable siding and finish materials.
| Parameter | Specification |
|---|---|
| Model | CN565X |
| Brand | KYA |
| Product Code | KYA-CN565X |
| Tool Type | Pneumatic Coil Siding Nailer |
| Body | Aluminum Body |
| Page-Listed Weight | 3.67 kg / 8.07 lbs |
| Dimensions | 315 × 128 × 306 mm |
| Operating Pressure | 70–120 PSI / approximately 5–8.3 bar |
| Magazine Capacity | 225–300 nails depending on fastener configuration |
| Wire Nail Collation | 15° Flat Wire-Welded Coil Nails |
| Plastic Nail Collation | 15° Flat Plastic-Sheet Collated Coil Nails |
| Wire Nail Length | Approximately 45–65 mm / 1-3/4"–2-1/2" |
| Plastic Nail Length | 32–65 mm / 1-1/4"–2-1/2" |
| Shank Diameter | 2.3–2.5 mm / approximately .092"–.099" |
| Head Diameter | Approximately 5.0–6.0 mm / .197"–.236" |
| Shank Types | Smooth, Ring, Screw |
Fastener compatibility should be confirmed using collation type, nail length, shank diameter, head diameter and coil dimensions. A nail should not be selected only because it is described as a 15° coil nail.
For flat wire-welded coil nails, the CN565X platform is designed around approximately 45–65 mm (1-3/4"–2-1/2") nail lengths with 2.3–2.5 mm shank diameters and approximately 5.0–6.0 mm heads.
Wire-welded coils are commonly selected for siding, sheathing, fencing, subflooring, decking and other construction fastening where the specified nail dimensions fall within the tool range.
The CN565X also accepts compatible flat plastic-sheet collated coil nails from approximately 32–65 mm (1-1/4"–2-1/2"). This provides additional flexibility where plastic-sheet collation is preferred for the application.
Because the minimum nail length can differ between wire and plastic collation, buyers should specify both the required nail length and collation type when ordering the tool or matching fasteners.
Request Tool and Nail Specifications
The CN565X supports smooth, ring and screw shank nails within the specified dimensions. The correct shank design depends on the material, fastening requirement and applicable construction specification.
| Shank Type | Typical Selection Consideration |
|---|---|
| Smooth Shank | General construction fastening where smooth-shank nails meet the material and project requirements. |
| Ring Shank | Provides increased mechanical engagement with compatible wood substrates when additional withdrawal resistance is required. |
| Screw Shank | Used in selected timber and wood fastening applications where a twisted shank profile is specified. |
The CN565X is designed for professional construction and woodworking applications that use 15° coil nails within its specified dimensional range.
Fiber cement siding: when the selected nail dimensions, head size, material and finish meet the siding manufacturer's fastening requirements.
Wood siding: cedar and other compatible siding materials using the appropriate corrosion-resistant fastener.
Sheathing: fastening compatible panels to wood framing.
Fencing: boards, rails and related timber fastening.
Subflooring: selected wood panel fastening applications.
Roof decking: compatible roof-deck fastening where the specified coil nail meets project requirements.
Exterior decking and trim: when the fastener material and finish are appropriate for the exposure conditions.
Furring and strapping: repetitive construction fastening using compatible coil nails.
The CN565X can be used for compatible fiber cement siding installations when the required fastener falls within the tool's nail range. Fiber cement systems can specify particular nail head diameters, shank dimensions, corrosion-resistant materials and minimum penetration requirements.
Before selecting a coil nail for fiber cement siding, confirm the siding manufacturer's installation instructions and choose the required nail material, head size, shank type and length. Tool capacity alone does not determine whether a fastener is suitable for a particular siding product.
The CN565X platform includes a depth-control adjustment that allows the operator to change nail driving depth according to the substrate and fastener.
Correct depth is especially important for siding and panel applications. The nail should be driven according to the material manufacturer's fastening requirements rather than excessively overdriven into the surface.
The CN565X platform includes an anti-double-fire trigger mechanism designed to provide additional firing control during repetitive fastening.
The tool supports contact and single-sequential operation on documented CN565X configurations. Operators should follow the supplied instruction manual when selecting the firing mode and should disconnect the air supply before servicing, clearing fasteners or performing maintenance.
The current KYA specification lists a magazine capacity of approximately 225–300 nails. Capacity varies with nail length, head diameter and collation type.
For production or high-volume fastening, confirm the coil configuration as well as the number of nails per coil. Wire-welded and plastic-sheet collated fasteners may use different coil capacities.
The KYA CN565X has a listed operating pressure range of 70–120 PSI / approximately 5–8.3 bar. Use clean, regulated compressed air and select pressure according to the fastener size, substrate and required drive depth while remaining within the permitted operating range.
Do not exceed the maximum allowable air pressure. Follow the operating and maintenance instructions provided with the tool.
The CN565X belongs to the same general professional tool category as several widely used 15° 2-1/2" coil siding nailers. However, similar tool categories do not guarantee that every fastener, magazine or accessory is interchangeable.
| Selection Point | KYA CN565X |
|---|---|
| Maximum Nail Length | 65 mm / 2-1/2" |
| Plastic Nail Minimum Length | 32 mm / 1-1/4" |
| Wire Nail Minimum Length | Approximately 45 mm / 1-3/4" |
| Shank Diameter | 2.3–2.5 mm / .092"–.099" |
| Head Diameter | Approximately 5.0–6.0 mm / .197"–.236" |
| Collation | 15° Wire-Welded / Plastic Sheet |
| Magazine Capacity | Approximately 225–300 nails |
When replacing another siding nailer, compare the complete fastener specification, collation format, magazine capacity, pressure range and intended application. Do not assume that two 2-1/2" siding nailers are direct replacements solely because their maximum nail length is the same.
MAX CN565S3 and Metabo HPT NV65AH2 are professional 15° coil siding nailers with wire and plastic-sheet compatibility, but their published specifications differ from the KYA CN565X in areas such as minimum fastener length, magazine capacity, weight and supported fastener dimensions.
For this reason, they should be treated as comparable siding nailer platforms rather than automatic direct replacements. Buyers replacing an existing model should provide both the tool model and nail specification before ordering.
For an accurate quotation, provide the required quantity, destination market, application, collation type, nail length, shank diameter and head diameter. If replacing another pneumatic siding nailer, also provide the existing tool model.
The current KYA product information lists a minimum order quantity of 10 units, a 12-month warranty and a spare-parts kit with qualifying orders. Confirm current MOQ, sample arrangements, warranty scope, spare-parts terms and order conditions when requesting pricing.
KYA also supplies other CN-series pneumatic coil nailers and matching coil nails for different fastening ranges and industrial applications.
The CN565X accepts plastic-sheet collated nails from approximately 32–65 mm and wire-welded coil nails from approximately 45–65 mm, depending on the fastener configuration.
The documented CN565X fastener range uses approximately 2.3–2.5 mm / .092"–.099" shank diameters with heads around 5.0–6.0 mm / .197"–.236".
Yes. It is designed for both 15° flat wire-welded coil nails and 15° flat plastic-sheet collated nails within the specified dimensional ranges.
No. Documented CN565X specifications list approximately 45 mm as the minimum wire-welded nail length and 32 mm as the minimum plastic-sheet nail length.
Yes. Smooth, ring and screw shank nails are supported when the complete nail dimensions and collation type fall within the CN565X specification.
Yes, when the siding system specifies a compatible coil nail. Confirm nail length, shank diameter, head diameter, shank type, material and corrosion-resistant finish against the siding manufacturer's requirements.
Yes. Sheathing and roof decking are listed applications for the CN565X platform when the selected nail size and fastening specification are suitable for the assembly.
The current KYA specification lists approximately 225–300 nails. Actual capacity depends on nail length and collation configuration.
The current KYA specification lists an operating range of 70–120 PSI / approximately 5–8.3 bar.
Yes. Documented CN565X configurations include a depth-control adjustment for setting nail depth according to the material and fastener.
Documented CN565X configurations include an anti-double-fire mechanism and support controlled professional fastening operation.
Do not assume direct interchangeability. The tools belong to the same general 2-1/2" siding nailer category, but their magazine capacity, minimum nail lengths, weight and other specifications differ. Compare the complete tool and fastener specifications before replacing an existing nailer.
Some fastener dimensions overlap, but universal interchangeability should not be assumed. Compare the collation type, length, shank diameter, head diameter and coil dimensions of the exact nail before use.
The current KYA product specification lists a weight of 3.67 kg / 8.07 lbs. Buyers requiring exact shipping or tool-weight data should confirm the current production configuration with KYA.
Provide the required quantity, destination market, intended application, wire or plastic collation preference, nail length, shank diameter, head diameter and any spare-parts or packaging requirements.
KYA supplies CN565X pneumatic coil siding nailers for fastener distributors, construction suppliers, siding contractors and industrial users. For the correct configuration, send your required quantity, intended application and matching coil nail specification when requesting pricing.
