Home / Tools / Coil Nailer / CN565X Pneumatic Coil Nail Gun
Share to:

CN565X Pneumatic Coil Nail Gun

CN565X Air Coil Nailer
WEIGHT:3.67kgs(8.07lbs) Aluminum body
DIMENSIONS:315mm x 128mm x 306mm
LOAD CAPACITY:225-300pcs(wire coil nails)
OPERATING PRESSURE:70-120psi(5-8.3bar)

  • CN565X
  • KYA
  • KYA-CN565X
  • 3.67kgs(8.07lbs)
  • 70-120psi(5-8.3bar)
  • 225-300 nails
  • 15 Degree flat wire coil nails or 15 Degree Flat plastic sheet collated nails
Quantity:
CN565X

Product Overview:

CN565X Pneumatic Coil Nail Gun

The CN565X Pneumatic Coil Siding Nailer is a top of the line professional grade pneumatic siding nailer. The CN565X is used for siding, fencing, exterior trim, furring, and strapping jobs.Adjustable depth guide sets nails to desired depths. Lightweight magnesium housing design for durability. Soft rubber foot prevents damage. Tool-free adjustable exhaust conveniently directs exhaust away from the user. 

● 10 times/second rapid fire.

● Lightweight aluminum design for durability.

● Soft rubber foot helps to prevent damage to softer woods.

● Adjustable exhaust conveniently directs exhaust away.


Product Description
Model: CN565X Pneumatic Coil Nail Gun
Air Tool Type: Air Nailer
Tools Product Type: Air Tool
Tool Diamensions: 315mmx128mmx306mm(12-7/16"x5"x12-1/16")
Net Tool Weight: 3.67kgs(8.07lbs)
Body Material: Aluminum Body
Operate Pressure: 70-120psi(5-8.3bar)
Load Capcity 225-300 nails


Fasteners Type:

15 Degree flat wire coil nails
15 Degree Flat plastic sheet collated nails
Fasteners Head Diameter: 0.197"(5.0mm)-0.236"(6.0mm)
Fasteners Shank Diameter: 0.083"(2.1mm)-0.099"(2.5mm)

Fasteners Length:

1-1/4"(32mm)-2-1/2"(65mm)
Fasteners Shank Type: Smooth,Screw,Ring
CN565B-5

15 Degree flat wire coil nails

Head Diameter: 0.197"(5.0mm)-0.236"(6.0mm)

Shank Diameter: 0.083"(2.1mm)-0.099"(2.5mm)

Nail Length: 1-1/4"(32mm)-2-1/2"(65mm) 

Shank Type: Smooth ,Screw ,Ring,

Read More


CN45-6

15 Degree Flat plastic sheet collated nails

Head Diameter: 0.197"(5.0mm)-0.236"(6.0mm)

Shank Diameter: 0.083"(2.1mm)-0.099"(2.5mm)

Nail Length: 1-1/4"(32mm)-2-1/2"(65mm)

Shank Type: Smooth ,Screw ,Ring,

Read More

Features

 Compatible grip handle with 15 degree wire and plastic inserted coil nails.

 10 times/second rapid fire.

 Light weight and compact for easy maneuverability and extend use.

 Sheet collated nails without any adjustment.

 Depth adjustable for countersink and flush nail drive.

 Non-Marring tip protects working surface from damage.

Application

Decking Siding.

Siding (Hardboard and cement).

Sheathing,Fencing.

Roofing decking and exterior deck and trim.

Furring and strapping.

Coil nailer application

Our Services


No.   Symptom Problems Solutions
1.1 Air Leak  Air leak in the cylinder cap when tools don't work  1.Loose head valve piston seal or o-rings . Check and replace the head valve piston set
2.Worn or damaged o-ring or cylinder cap gasket under cylinder cap  Check and replace o-ring or cylinder cap gasket under the cylinder cap
1.2 Air leak in Trigger area  when tools don't work 1.Damaged o-ring in trigger valve  Check and replace  o-ring
2.Damaged o-ring in trigger valve stem  Check and replace o-ring
3.Dirt in the trigger valve Check and clean the trigger valve
1.3 Air leak in cylinder cap when tools are working  1.Damaged head valve piston o-rings Check and replace  o-rings
2.Damaged seal under cylinder cap  Check and replace seal
1.4 Air leak in nose when tools are working  1.Worn or damaged bumper Check and replace bumper
2.Loose driver(piston unit) thread Check and replace driver(piston unit) 
1.5 Air leak in Trigger area when tools are working 1.Worn or damaged trigger valve head Check and replace trigger valve head
2.Damaged head valve piston o-rings Check and replace head valve piston o-rings
2 Failed to get driver(piston unit) back to the correct position completely. 1.The driver(piston unit) is not straight or the driver guide(nose) is wrong assembled. Straighten the driver(piston unit)  or verify driver guide(nose) and magazine  
2.Worn or damaged nozzle   Check and replace nozzle 
3.The space between piston o-ring and  cylinder is too tight. Check if the cylinder is adequate lubrication or replace the o-ring on the piston.
3 Work weakly and sluggishly 1. Worn or damaged  piston o-ring  Check and replace piston o-ring 
2.Inadequate lubrication for head valve piston o-rings or too tight head valve piston o-rings   Place 2 or 6 drops of oil on o-rings or replace  head valve piston o-rings
3.Dirt in the nozzle Check and clean the nozzle
4 Tool jams frequently 1.Damaged or Worn driver (piston unit) Check and replace driver (piston unit)
2.Damaged or Worn driver guide (nose) Check and replace  driver guide (nose)
3.Driver guide cover is bent,so the space between driver guide cover and driver guide is too big Check and replace driver guide cover 
5 Nail can not be shot 1. Driver (piston unit) can't return to the correct position. Refer to no. 1  Symptom
2.Driver guide(nose) can not match magazine well Check and correct the position between driver guide(nose) and magazine 
3.Worn or damaged nail pusher compression spring  Check and replace nail pusher compression spring 

WELCOME TO CONTACT US

Contact us

TOOLS

FASTENERS

FURNITURE ACCESSORIES

OFFICE SUPPLIES

PACKAGING MATERIAL

WIRE

QUICK LINKS

Copyright © 2020. Changzhou KYA Fasteners Co.,Ltd. All rights reserved.