Home / Tools / Clinch Clip Tools

Clinch Clip Tools

Pneumatic Clinch Clip Tools for Bedding, Furniture and Wire Assembly

KYA supplies pneumatic clinch clip tools for mattress and box spring manufacturing, upholstered furniture, wire-frame assemblies, cages, traps and related industrial fastening work. The category includes Eclipser 2000 strip-fed tools, Eclipser 2800 coil-fed tools and M-series pneumatic clinching tools. Each tool is designed around specific clip dimensions and feeding requirements.

For distributors and factory buyers, the most important selection factors are the clip reference, wire combination, magazine format, working air pressure and accessibility of the fastening position. Confirm these details before ordering a tool or replacement clips.

Request Clinch Clip Tool Pricing

What Is a Pneumatic Clinch Clip Tool?

A pneumatic clinch clip tool, also called a clinching gun or E-clip closing tool, uses compressed air to press a preformed metal clip around wires or other compatible elements. It is commonly used to secure wire connections in mattress spring units, furniture frames and other fabricated wire products. The tool closes the clip rather than driving a nail or staple through a surface.

A clip that physically resembles another series is not automatically interchangeable. Correct feeding and closing depend on clip dimensions and profile, magazine design, driver and anvil configuration, as well as the wires being joined.

Clinch Clip Tool Types and Feeding Systems

Eclipser 2000 Series – Strip-Fed Clinching Tools

Eclipser 2000 models commonly use a manually loaded, curved magazine with collated clip strips. The listed Eclipser 2000-1020 and 2000-1020S tools use a constant-force spring feed and are specified for 80–90 PSI air supply. They are appropriate to evaluate for mattress, upholstery, cage and wire fastening applications where the selected tool and clip combination provides adequate access.

Eclipser 2800 Series – Coil-Fed Clinching Tools

Eclipser 2800 tools use a coil-fed clinch clip system for longer runs between clip replenishment. The listed 2800-1121 and 2800-6181 have 80–90 PSI specified air supply, while their compatible clip references and coil capacities differ. Coil capacity is dependent on the tool and clip size and must not be treated as a universal figure.

M46, M66 and Related Mattress Clinching Tools

KYA also lists M46, M66 and T4000 pneumatic clinching tools for mattress, sofa and spring assembly operations. These are separate tool and clip families; their specified fittings, feed systems and compatible clips should be confirmed against the individual model details.

Representative Clinch Clip Tools and Technical Specifications

The following is a model-level selection reference based on the corresponding published KYA product information. Specifications and compatible clip examples apply only to the stated models; confirm final tool configuration and clip dimensions and profile before purchase.

Tool model	Clip feeding	Air pressure	Published net weight	Clip capacity	Clip reference (examples)	Product details
Eclipser 2000-1020S	Strip / curved magazine	80–90 PSI	2.0 kg	31–47 clips per strip	64A18SG, 71A16SAL, 71A18S, 71A18SG	View model
Eclipser 2000-1020	Strip / curved magazine	80–90 PSI	2.0 kg	31–47 clips per strip	76A18S, 85A18S	View model
Eclipser 2000-1121	Strip / curved magazine	80–90 PSI	2.0 kg	31–47 clips per strip	91A23S, 96A23S	View model
Eclipser 2800-1121	Coil-fed	80–90 PSI	3.2 kg	9,375–10,000 clips per coil	88A23R, 91A23R, 96A23R	View model
Eclipser 2800-6181	Coil-fed	80–90 PSI	3.2 kg	6,667 clips per coil	80F23R	View model
M46	Model-specific feed	85–115 PSI	3.3 kg	Confirm for selected clip	M46 series	View model
M66	Model-specific feed	85–115 PSI	3.3 kg	Confirm for selected clip	M66 series	View model
T4000	Model-specific feed	85–115 PSI	Confirm for selected version	Confirm for selected clip	M66 series	View model

Published models may have multiple configurations or revised components. Confirm the final equipment datasheet, spare parts and clips supplied with an order. For example, KYA has displayed different weight figures for T4000; this comparison therefore does not assign a single confirmed net weight.

Applications of Clinch Clip Tools

Mattress and box spring production: joining border wires, spring units and selected structural wire components.
Upholstered furniture: joining compatible sinuous springs, edge wires and wire-frame sections.
Cages, traps and mesh assemblies: securing selected wire connections where the tool has sufficient access.
Fencing and enclosure fabrication: closing clips around compatible wire elements.
Housing and industrial panel fabrication: fastening wire and supporting components where approved by the project design.

Clip selection and completed joint performance depend on wire size, clip material, tool setting and the assembly requirements. Conduct joint testing where fastening performance is critical.

How to Choose the Right Tool and Clinch Clips

1. Confirm the clip profile and dimensions

Provide the clip code or a dimensional drawing showing length, width, height, inside dimension and outside dimension. Two clips with similar overall size can differ in the shape required by the driver and anvil.

2. Check the wire combination and required closure

Identify both wire diameters and the intended finished joint dimensions and profile. The tool must close the selected clip securely without damaging the wire or leaving an incomplete closure. Validate a representative assembly before volume production.

3. Match the feed format and air supply

Confirm whether the production line uses manually loaded strips or a compatible coil feed system. Verify working pressure, air hose fitting, feed arrangement and magazine access using the selected tool datasheet.

4. Plan for maintenance and spare parts

For repeated production work, review access to driver blades, front plates, anvils and feed components. Confirm maintenance procedures and replacement part references for the exact model rather than assuming all tools use the same construction.

Clinch Clips: Dimensions and Packing Reference

The following reference tables reproduce the dimensions and packing figures supplied for the clinch clip range. Measurements are listed in imperial and metric units. A blank entry means that no value was provided in the original reference data; it does not indicate zero. The tabular reference is not a universal tool compatibility chart, and cross-brand clip matching requires individual confirmation.

Clinch Clip Size and Packing Table – Part 1

Clip code	Length (in.)	Length (mm)	Width (in.)	Width (mm)	Height (in.)	Height (mm)	Inside (in.)	Inside (mm)	Outside (in.)	Outside (mm)	Clips / carton	Clips / roll	Carton wt. (lb)	Carton wt. (kg)	Roll wt. (lb)	Roll wt. (kg)
52A14	0.520	13.21	0.430	10.92	5/16	7.94	0.148	3.76	0.206	5.23	15,080	15,000	27.67	12.55	27.53	12.49
52A14-G	0.520	13.21	0.430	10.92	5/16	7.94	0.142	3.61	0.206	5.23	15,080	15,000	27.67	12.55	27.53	12.49
64A18-G	0.640	16.26	0.430	10.92	13/32	10.32	0.196	4.98	0.260	6.60	10,340	15,000	25.77	11.69	37.38	16.69
68H17-LP	0.680	17.27	0.860	21.84	7/16	11.11	0.185	4.70	0.260	6.60		6,500			35.50	16.10
68H18	0.686	17.42	0.860	21.84	15/32	11.90	0.196	4.98	0.260	6.60	4,700	6,460	25.10	11.39	34.51	15.65
68H18-C	0.686	17.42	0.860	21.84	15/32	11.90	0.182	4.62	0.260	6.60	4,700	6,460	25.10	11.39	34.51	15.65
71A18	0.708	17.98	0.430	10.92	7/16	11.11	0.202	5.13	0.260	6.60	9,400	13,025	23.49	10.66	32.54	14.76
72E18.	0.720	18.29	0.670	17.02	15/32	11.90	0.202	5.13	0.260	6.60	6,110		24.19	10.97
74F18R	0.736	18.69	0.735	18.67	1/2	12.70	0.196	4.98	0.260	6.60		7,710			37.77	17.13
74H18S	0.736	18.69	0.735	18.67	1/2	12.70	0.202	5.13	0.260	6.60	5,076		22.53	10.22
74F18_C	0.736	18.69	0.735	18.67	1/2	12.70	0.182	4.62	0.260	6.60	5,076	7,710	24.87	11.28	37.77	17.13
74F18_L	0.736	18.69	0.735	18.67	1/2	12.70	0.188	4.78	0.260	6.60	5,076	7,710	24.87	11.28	37.77	17.73
74H17_LP	0.740	18.80	0.860	21.84	1/2	12.70	0.173	4.39	0.260	6.60	4,230	6,750	29.71	13.48	47.41	21.51
74H18R	0.740	18.80	0.860	21.84	1/2	12.70	0.196	4.98	0.260	6.60		6,750			38.90	17.65
74H18S	0.740	18.8	0.860	21.84	1/2	12.70	0.202	5.13	0.260	6.60	4,230		22.09	10.02
74H18_C	0.740	18.8	0.860	21.84	1/2	12.70	0.182	4.62	0.260	6.60	4,230	6,750	24.38	11.06	38.90	17.65
74H18_G	0.740	18.8	0.860	21.84	1/2	12.70	0.196	4.98	0.260	6.60	4,230	6,750	24.38	11.06	38.90	17.65
74H18_L	0.740	18.8	0.860	21.84	1/2	12.70	0.187	4.75	0.260	6.60	4,230	3,750	24.38	11.06	38.90	17.65
76A18	0.768	19.51	0.430	10.92	1/2	12.70	0.202	5.13	0.260	6.60	8,460	13,025	22.92	10.4	35.30	16.01
76A22	0.755	19.18	0.430	10.92	1/2	12.70	0.202	5.13	0.260	6.60		12,300			32.77	14.86
78F18	0.780	19.81	0.735	18.67	15/32	11.90	0.196	4.98	0.260	6.60	4,320		22.43	10.17
78H17_LP	0.780	19.81	0.860	21.84	17/32	13.49	0.173	4.39	0.260	6.60		5,300			39.24	17.80
80F18_L	0.800	20.32	0.735	18.67	17/32	13.49	0.188	4.78	0.260	6.60	5,076	7,710	27.03	12.26	41.06	18.62
80F23	0.800	20.32	0.735	18.67	1/2	12.70	0.248	6.30	0.306	7.77	4,320	6,667	20.85	9.46	32.17	14.59
80H18	0.800	20.32	0.860	21.84	17/32	13.49	0.196	4.98	0.260	6.60	4,230	6,800	26.36	11.96	42.37	19.22
80H18_LP	0.800	20.32	0.860	21.84	17/32	13.49	0.187	4.75	0.260	6.60	4,230	6,800	26.36	11.96	42.37	19.22
80H23	0.800	21.32	0.860	21.84	1/2	12.70	0.248	6.30	0.306	7.77	3,600		20.32	9.22
83H17_LP	0.830	21.08	0.860	21.84	9/16	14.29	0.182	4.62	0.260	6.60		5,000			39.39	17.87
83H18	0.830	21.08	0.860	21.84	9/16	14.29	0.194	4.93	0.260	6.60		5,000			33.33	15.12
84F23	0.840	21.34	0.735	18.67	1/2	12.70	0.242	6.15	0.306	7.77		6,500			36.34	16.48
85A18	0.856	21.74	0.430	10.92	9/16	14.29	0.202	5.13	0.260	6.60	7,520	11,771	22.72	10.31	35.56	16.13
85A22	0.856	21.74	0.430	10.92	17/32	13.49	0.230	5.84	0.288	7.32	6,720	12,300	20.30	9.21	37.16	16.86
85H17_LP	0.850	21.59	0.860	21.84	19/32	15.08	0.173	4.39	0.260	6.60		4,325			34.89	15.83
85H18_C	0.850	22.59	0.860	21.84	9/16	14.29	0.180	4.57	0.260	6.60	3,290	4,325	22.46	10.19	29.35	13.31
87F18	0.870	22.1	0.735	18.67	9/16	14.29	0.196	4.98	0.260	6.60	4,512		26.13	11.85
87F18_LP	0.870	22.1	0.735	18.67	9/16	14.29	0.187	4.75	0.260	6.60	4,512		26.13	11.85
87H17_LP	0.870	22.1	0.860	21.84	19/32	15.08	0.173	4.39	0.260	6.60		4,375			36.13	16.39
87H18	0.870	22.1	0.860	21.84	19/32	15.08	0.194	4.93	0.260	6.60	3,760	5,625	26.27	11.92	39.30	17.83
87H18_C	0.870	22.1	0.860	21.84	19/32	15.08	0.180	4.57	0.260	6.60	3,760	5,625	26.27	11.92	39.30	17.83
87H18_L	0.870	22.1	0.860	21.84	19/32	15.08	0.186	4.72	0.260	6.60	3,760	5,625	26.27	11.92	39.30	17.83
88A22	0.881	22.38	0.430	10.92	9/16	14.29	0.230	5.84	0.288	7.32	6,720	12,300	20.89	9.48	38.24	17.35

Clinch Clip Size and Packing Table – Part 2

Clip code	Length (in.)	Length (mm)	Width (in.)	Width (mm)	Height (in.)	Height (mm)	Inside (in.)	Inside (mm)	Outside (in.)	Outside (mm)	Clips / carton	Clips / roll	Carton wt. (lb)	Carton wt. (kg)	Roll wt. (lb)	Roll wt. (kg)
88A22_LP	0.881	22.38	0.430	10.92	9/16	14.29	0.213	5.41	0.288	7.32	6,720	12,300	23.77	10.78	43.51	19.74
88A23	0.874	22.2	0.430	10.92	9/16	14.29	0.248	6.30	0.306	7.77	6,400	9,375	19.75	8.96	28.92	13.12
88F23	0.880	22.35	0.735	18.67	9/16	14.29	0.248	6.30	0.306	7.77	3,840	5,521	20.38	9.24	29.31	13.30
88F23_L	0.880	22.35	0.735	18.67	9/16	14.29	0.233	5.92	0.306	7.77	3,840	5,521	22.49	10.2	32.34	14.67
88H23	0.880	22.35	0.860	21.84	9/16	14.29	0.248	6.30	0.306	7.77	3,200	3,850	19.88	9.02	23.91	10.85
88H23-AUTO	0.880	22.35	0.860	21.84	9/16	14.29	0.242	6.15	0.306	7.77	3,200	3,850	21.93	9.95	26.39	11.97
88H23_C	0.880	22.35	0.860	21.84	9/16	14.29	0.228	5.79	0.306	7.77	3,200	3,850	21.93	9.95	26.39	11.97
88H23_G	0.880	22.35	0.860	21.84	9/16	14.29	0.242	6.15	0.306	7.77	3,200	3,850	21.93	9.95	26.39	11.97
90A29_G	0.900	22.86	0.430	10.92	15/32	11.90	0.302	7.67	0.410	10.41		8,800			52.04	23.61
90F18R	0.900	22.86	0.735	18.67	5/8	15.88	0.196	4.98	0.260	6.60		5,210			31.21	14.16
90F18S	0.900	22.86	0.735	18.67	5/8	15.88	0.202	5.13	0.260	6.60	3,948		21.43	9.72
90F18_G	0.900	22.86	0.735	18.67	5/8	15.88	0.196	4.98	0.260	6.60	3,948	5,210	23.65	10.73	31.21	14.16
90H17	0.900	22.86	0.860	21.84	5/8	15.88	0.186	4.72	0.260	6.60	3,290	4,480	26.66	12.09	36.31	16.47
90H17_LP	0.900	22.86	0.860	21.84	5/8	15.88	0.177	4.50	0.260	6.60	3,290	4,480	26.66	12.09	36.31	16.47
90H18	0.900	22.86	0.860	21.84	5/8	15.88	0.196	4.98	0.260	6.60	3,290	4,480	23.06	10.46	31.48	14.28
90H18_BP	0.900	22.86	0.860	21.84	5/8	15.88	0.198	5.03	0.260	6.60	9,000		61.11	27.72
90H18_C	0.900	22.86	0.860	21.84	5/8	15.88	0.180	4.57	0.260	6.60	3,290	4,480	23.78	10.79	32.38	14.69
90H18_L	0.900	22.86	0.860	21.84	5/8	15.88	0.186	4.72	0.260	6.60	3,290	4,480	23.78	10.79	32.38	14.69
95F23	0.938	23.83	0.735	18.67	21/32	16.67	0.238	6.05	0.306	7.77	3,360	4,375	22.29	10.11	29.02	13.16
95F23_C	0.938	23.83	0.735	18.67	21/32	16.67	0.224	5.69	0.306	7.77	3,360	4,375	22.29	10.11	29.02	13.16
96A23	0.960	24.38	0.430	10.92	19/32	15.08	0.234	5.94	0.306	7.77	5,600	10,000	23.55	10.68	42.06	19.08
97H18	0.970	24.64	0.860	21.84	5/8	15.88	0.194	4.93	0.260	6.60	3,290	4,585	25.63	11.63	35.72	16.20
97H18_L	0.970	24.64	0.860	21.84	5/8	15.88	0.125	3.18	0.260	6.60	3,290	4,585	25.63	11.63	35.72	16.20
98H22_P-BLK	0.980	24.89	0.860	21.84	21/32	16.67	0.226	5.74	0.306	7.77	2,800	3,900	26.05	11.82	36.28	16.46
98H22_P-WHT	0.980	24.89	0.860	21.84	21/32	16.67	0.226	5.74	0.306	7.77	2,800	3,900	26.05	11.82	36.28	16.46
101F23	1.010	25.65	0.735	18.67	21/32	16.67	0.238	6.05	0.306	7.77	3,360	4,350	24.00	10.89	31.07	14.09
101F23_A	1.010	25.65	0.735	18.67	21/32	16.67	0.238	6.05	0.306	7.77	3,360		10.65	4.83
101H22	1.010	25.65	0.860	21.84	11/16	17.46	0.230	5.84	0.306	7.77	2,800	3,900	26.15	11.86	36.43	16.52
101H23	1.010	25.65	0.860	21.84	11/16	16.67	0.240	6.10	0.306	7.77	2,800	3,900	22.71	10.3	31.64	14.35
101H23_C	1.010	25.65	0.860	21.84	11/16	17.46	0.226	5.74	0.306	7.77	2,800	3,900	22.71	10.3	31.64	14.35
101H23_L	1.010	25.65	0.860	21.84	11/16	17.46	0.232	5.89	0.306	7.77	2,800	3,900	22.71	10.3	31.64	14.35
102A25	1.020	25.91	0.430	10.92	5/8	15.88	0.246	6.25	0.326	8.28		9,375			43.06	19.53
109H22	1.090	27.69	0.860	21.84	23/32	18.26	0.228	5.79	0.306	7.77	2,400	3,900	24.83	11.26	40.35	18.30
109H22_C	1.090	27.69	0.860	21.84	23/32	18.26	0.216	5.49	0.306	7.77	2,400	3,900	24.19	10.97	39.52	17.93
109H22_L	1.090	27.69	0.860	21.84	23/32	18.26	0.218	5.54	0.306	7.77	2,400	3,900	25.47	11.55	41.38	18.77
110A18	1.100	27.94	0.430	10.92	21/32	16.67	0.202	5.13	0.260	6.60	6,580	9,300	25.54	11.58	36.10	16.37
110E25_S4	1.100	27.94	0.670	17.02	23/32	18.26	0.232	5.89	0.326	8.28	1,443		10.23	4.64
110H24	1.100	27.94	0.860	21.84	23/32	18.26	0.248	6.30	0.326	8.28	2,220	3,750	23.18	10.51	39.15	17.76
110H25	1.100	27.94	0.860	21.84	23/32	18.26	0.252	6.40	0.326	8.28	2,220	3,750	20.21	9.17	34.13	15.48
110H25_C	1.100	27.94	0.860	21.84	23/32	18.26	0.238	6.05	0.326	8.28	2,220	3,750	20.21	9.17	34.13	15.48
112D25	1.120	28.45	0.620	15.75	23/32	18.26	0.258	6.55	0.326	8.28	3,108		20.77	9.42
114D24	1.140	28.96	0.620	15.75	3/4	19.05	0.247	6.27	0.326	8.28	3,108		24.55	11.14
116F33	1.160	29.46	0.735	18.67	11/16	17.46	0.330	8.38	0.398	10.11	2,160		17.72	8.04
120H23_C	1.200	30.48	0.860	21.84	3/4	19.05	0.224	5.69	0.306	7.77	2,400		23.83	10.81
125A38_G	1.250	31.75	0.430	10.92	11/16	17.46	0.280	7.11	0.480	12.19	3,000	5,100	27.38	12.42	46.55	21.12
125A38_S3	1.250	31.75	0.430	10.92	11/16	17.46	0.360	9.14	0.480	12.19	3,000	5,100	27.38	12.42	46.55	21.12
132A38_G	1.320	33.53	0.430	10.92	3/4	19.05	0.360	9.14	0.480	12.19	3,000	5,100	28.91	13.11	49.15	22.29
132A38_S3	1.320	33.53	0.430	10.92	3/4	19.05	0.380	9.65	0.500	12.70	3,000	5,100	29.22	13.25	49.67	22.53
132A38_S4	1.320	33.53	0.430	10.92	3/4	19.05	0.380	9.65	0.500	12.70	3,000	5,100	28.91	13.11	49.15	22.29
135H30_C	1.350	34.29	0.860	21.84	13/16	20.64	0.298	7.57	0.388	9.86	1,550	2,350	19.35	8.78	29.34
135H31	1.350	34.29	0.860	21.84	13/16	20.64	0.316	8.03	0.388	9.86	1,550	2,350	18.83	8.54	27.80

To confirm a replacement clip, send the original clip item number, the tool model, the wire diameters and a sample or dimensional sketch. Clip dimensions and profile and feed compatibility must be checked together before changing suppliers or production equipment.

Request Tool and Clip Compatibility Review

Common Tool and Clip Matching Considerations

Buying requirement	What to verify	Why it matters
Mattress border frame	Wire size, clip code, tool mouth clearance and final closure	Helps secure the selected spring or border-wire joint
Furniture spring attachment	Clip width and height, spring wire diameter, strip or coil format	Helps avoid misfeeds and incomplete clinching
High-volume production	Feed mechanism, compatible roll or strip, air supply and replacement parts	Supports consistent operation and planned maintenance
Replacement tool sourcing	Existing tool model, clip series, driver/anvil design and dimensions	Avoids relying on model names or nominal dimensions alone

Wholesale Supply for Mattress and Furniture Equipment Buyers

KYA supports product sourcing inquiries from mattress manufacturers, upholstery factories, equipment distributors, importers and industrial tool buyers. For an accurate quotation, provide the tool model, intended application, compatible clip code, estimated purchasing quantity and destination market. For existing production lines, include the reference tool and clip model whenever possible.

If clinch clips are required with the tool, confirm clip dimensions and packing quantities separately. Material grade, surface finish, accessory configuration and shipping terms should be specified in the quotation.

Contact KYA for Bulk Supply

Frequently Asked Questions About Clinch Clip Tools

What is a pneumatic clinch clip tool used for?

A pneumatic clinch clip tool closes a metal clinch clip around compatible wire components. Typical applications include mattress spring assembly, upholstered furniture, wire frames, cages, traps and selected fencing or panel fabrication.

What is the difference between strip-fed and coil-fed clinching tools?

Strip-fed models use manually loaded collated clips in a magazine. Coil-fed models can use a compatible continuous clip feed system for longer runs. The feeding formats and clips are not automatically interchangeable.

Which clinch clips fit an Eclipser 2000 tool?

The compatible clip code depends on the specific model. For example, the Eclipser 2000-1020 and 2000-1020S list different clip references. Always match the exact tool model and clip dimensions and profile.

What clips are used with Eclipser 2800-1121?

The KYA model reference lists 88A23R, 91A23R and 96A23R examples. Confirm the selected clip dimensions and the tool configuration before ordering.

What air pressure do pneumatic clinch clip tools require?

Several listed Eclipser 2000 and 2800 models specify 80–90 PSI, while the KYA M46 and M66 model pages specify 85–115 PSI. Follow the requirements for the exact tool rather than a category-wide setting.

Can different clip brands be used in the same tool?

Only when the clip dimensions, profile and feeding characteristics are verified for that tool. Similar-looking clips or cross-reference numbers do not guarantee reliable compatibility.

Which tool is suitable for high-volume mattress assembly?

A coil-fed system may reduce clip replenishment compared with a manually loaded strip system, but the correct tool still depends on the mattress wire combination, required clip and production layout.

How should a buyer check clip size and packing?

Provide the clip code and required length, width, height, inside/outside dimensions and packing format. The clip reference tables on this page show published size and packing options.

How can clip jams be reduced?

Check that the selected clip profile and feed format match the tool, keep the feed path clean and follow the maintenance and air pressure instructions for the model. Disconnect the compressed-air supply before servicing.

What information should be sent for a wholesale quotation?

Send the tool model, clip reference, wire diameters, application, required quantity and destination. If replacing an existing system, include product photos or a dimensional drawing for compatibility review.

Request a Clinch Clip Tool Quote

For Eclipser 2000 and 2800 series tools, mattress clinching tools or matched clinch clips, contact KYA with your model requirements and application details. Include existing tool and clip references when seeking a compatible replacement.

Request a Quote