The Eclipser 2000-1022 is a lightweight, manually triggered pneumatic clinch clip tool designed primarily for bedding and mattress manufacturing. The KYA product page identifies the green version as EA2000-1022, with a curved composite magazine, constant-force spring clip feed and compatibility with specified Encore / Hartco E-Clips.
The tool weighs 4.4 lbs / 2.0 kg, measures 7 × 4 × 16.5 inches / 178 × 102 × 419mm, and operates at 80–90 PSI / 5.5–6.2 BAR. Its standard clipping head is intended primarily for open-access fastening work.
For clip selection, the verified references are Encore 85A22S and 88A22S, corresponding to Hartco CLP-33 and CLP-32. Use these exact clip references rather than assuming compatibility with other clinch clips based only on appearance or width.
| Specification | Details |
|---|---|
| Model | Eclipser 2000-1022 |
| KYA Page Product ID | EA2000-1022 |
| Brand | ENCORE |
| Tool Type | Hand-Held, Manually Triggered Pneumatic Clinch Clip Tool |
| Primary Application | Bedding / Mattress Manufacturing |
| Access Type | Standard clipping head, primarily for open-access fastening jobs |
| Dimensions | 7 × 4 × 16.5" / 178 × 102 × 419mm |
| Weight | 4.4 lbs / 2.0 kg |
| Housing | Green Composite Plastic Housing |
| Magazine Material | Green Composite Plastic |
| Magazine Format | Curved Magazine |
| KYA Published Magazine Capacity | 31–47 clips depending on clip size |
| Encore Published Capacity | Up to 50 clips per strip |
| Clip Feeding Method | Constant-Force Spring |
| Standard Clip Feed | Manually Loaded Collated Clip Strips |
| Air Supply | 80–90 PSI / 5.5–6.2 BAR |
| Primary Power Unit | Main Cylinder, 3.06" / 78mm Bore, Spring Return |
| Verified Encore Clips | 85A22S, 88A22S |
| Hartco Clip References | CLP-33, CLP-32 |
| Optional Hanger | Encore lists hanger as a separately sold add-on for this tool |
Magazine-capacity note: the current KYA page publishes 31–47 clips depending on clip size, while the current Encore product page specifies up to 50 clips per strip. Keep the KYA value when quoting the current KYA configuration and verify the actual strip count for the selected 85A22S or 88A22S clip.
Request Eclipser 2000-1022 Pricing
Encore's current product page and tool cross-reference identify two primary E-Clips for the Eclipser 2000-1022: 85A22S and 88A22S. Their Hartco clip references are CLP-33 and CLP-32.
| Encore E-Clip | Hartco Reference | Verified Tool Reference |
|---|---|---|
| 85A22S | CLP-33 | Eclipser 2000-1022 |
| 88A22S | CLP-32 | Eclipser 2000-1022 |
The letter A identifies the A-width E-Clip family in Encore / Hartco clip terminology. Do not substitute another clip solely because its open dimensions appear similar; the clip profile, material, collation and closing geometry must match the 2000-1022 tooling.
The Eclipser 2000 Series is designed around collated metal clip strips that are manually loaded by the operator into the curved magazine. Encore describes the standard Eclipser 2000 system as using 12-inch-long strips of E-Clips.
This strip-fed configuration is an important purchasing distinction. The Eclipser 2000-1022 should not be confused with straight-magazine continuous-coil Eclipser 2500 or 2800 systems simply because the model numbers share the 1022 / 3322 application family.
| Feature | Eclipser 2000-1022 | Eclipser 2800-3322 |
|---|---|---|
| Feed System | Manually loaded strip clips | Continuous-coil clip system |
| Magazine | Curved composite magazine | Straight steel magazine |
| Weight | 4.4 lbs / 2.0 kg | 7.0 lbs / 3.2 kg |
| Clip Format | 85A22S / 88A22S strip E-Clips | 76A22R, 80A22R, 85A22R, 88A22R roll clips |
| Relationship | They are separate tool systems. Encore states that 2800-3322 replaces 2800-1022, not 2000-1022. | |
The Eclipser 2000-1022 uses Encore's quick-release front-plate design. The front plate allows access to the driver blade without requiring tools for front-plate removal, simplifying driver-blade replacement and routine service access.
Driver blades, anvils and other wear components should be matched to the exact 2000-1022 configuration rather than selected only by the general Eclipser 2000 series name.
The tool uses a curved composite magazine with a constant-force spring feed mechanism. This configuration advances the collated strip toward the clipping head as clips are installed.
When troubleshooting clip feeding, verify the exact E-Clip reference, strip condition and magazine cleanliness before assuming that another A-width clip is interchangeable.
The verified operating-air specification is 80–90 PSI / 5.5–6.2 BAR. The primary power unit is a spring-return main cylinder with a 3.06-inch / 78mm bore.
Operate the tool within its published air-pressure range and follow the applicable tool manual for air preparation, service procedures and replacement parts.
Encore currently identifies the same 2000-1022 tool family with different product IDs according to housing color. The KYA product page specifically lists the green EA2000-1022 version.
| Housing Color | Encore Product ID | Page Relevance |
|---|---|---|
| Green | EA2000-1022 | Product ID listed on the current KYA page |
| Black | HR2000-1022 | Encore product-family reference |
| Red | SN2000-1022 | Encore product-family reference |
Encore identifies bedding as the primary application for the exact Eclipser 2000-1022. The tool uses 85A22S or 88A22S strip clips to clinch compatible wire components in bedding production.
The exact official product page describes the 2000-1022 as having a standard clipping head intended primarily for open-access fastening jobs. Where access is restricted, select tooling based on the actual joint geometry rather than assuming this standard head will fit.
The current KYA page also lists furniture-frame construction and upholstery attachment among its application references. For a new production process, verify the actual clip, wire dimensions and access around the joint before specifying the 2000-1022.
| Check | Verified Reference |
|---|---|
| Tool Model | Eclipser 2000-1022 / EA2000-1022 |
| Encore Clip | 85A22S or 88A22S |
| Hartco Reference | CLP-33 or CLP-32 |
| Collation | Collated strip E-Clips |
| Magazine | Curved composite magazine |
| Feed | Constant-force spring |
| Application | Bedding / mattress manufacturing is the primary verified application |
| Information | What to Provide |
|---|---|
| Tool | Eclipser 2000-1022 / EA2000-1022 |
| Existing Clip | 85A22S, 88A22S, CLP-33 or CLP-32 |
| Application | Describe the bedding, mattress, furniture or other wire-clinching operation |
| Wire Combination | Provide the wire dimensions and joint arrangement when the application differs from an existing verified setup |
| Existing Tool Reference | Provide the current Eclipser / Hartco model when replacing an existing tool |
| Required Accessories | Identify hanger or other required accessories separately; do not assume all add-ons are included |
| Quantity | Provide required tool quantity and clip consumption requirement |
Send Your 2000-1022 Requirements
It is a hand-held, manually triggered pneumatic clinch clip closure tool that uses collated strip clips. The exact model is primarily specified for bedding applications.
The current KYA page lists EA2000-1022 as both the model and code for the green tool.
The verified clip references are Encore 85A22S and 88A22S, corresponding to Hartco CLP-33 and CLP-32.
Yes. Encore's current 2000-1022 reference pairs 85A22S with CLP-33.
Yes. Encore's current tool reference pairs 88A22S with CLP-32.
The verified operating range is 80–90 PSI / 5.5–6.2 BAR.
The published tool weight is 4.4 lbs / 2.0 kg.
The published dimensions are 7 × 4 × 16.5 inches / 178 × 102 × 419mm.
The Eclipser 2000-1022 uses a curved composite magazine with a constant-force spring feed system.
The KYA page lists 31–47 clips depending on clip size. Encore's current official page describes magazine capacity as up to 50 clips per strip. Confirm the actual count for the selected clip.
Its standard configuration uses collated clip strips manually loaded into the curved magazine. Encore separately lists a Continuous Coil Clipping System as an add-on, so standard strip feed should not be confused with a factory straight-magazine 2800 coil-fed tool.
No. They are separate tool systems. The 2000-1022 uses a curved strip magazine, while the 2800-3322 uses a straight magazine and continuous-coil clip system. Encore identifies 2800-3322 as the replacement for 2800-1022, not for 2000-1022.
It allows access to and replacement of the driver blade without requiring tools to remove the front plate.
The current Encore product page lists the hanger as a sold-separately add-on. Do not assume it is included with every supplied configuration.
Encore currently identifies bedding as the primary application. The KYA page additionally references mattress assembly, furniture-frame construction and upholstery-related fastening.
Encore describes the 2000-1022 as a standard-head tool primarily for open-access fastening jobs. Select another head or tool configuration when access geometry requires a specialized design.
Do not assume compatibility from clip width or appearance alone. The verified clips for this exact tool are 85A22S and 88A22S. Other clip profiles require confirmation against the tool's magazine, driver, anvil and closing geometry.
Provide the existing tool model, clip reference, wire dimensions, application and joint-access conditions. This allows the exact tool and clip system to be checked without relying only on a general Eclipser-series name.
For purchasing or replacement evaluation, identify the exact EA2000-1022 / Eclipser 2000-1022 tool, required 85A22S or 88A22S clip, application and existing equipment reference.
The key purchasing parameters are the tool model, strip-fed clip system, air pressure, magazine configuration and verified clip reference. Do not substitute another Eclipser model solely because it uses a similar clip width or model-number family.
