The Eclipser 2000-1024 pneumatic clinch clip tool is a lightweight, hand-held pneumatic fastening tool designed primarily for bedding and 10 mm flat border frame assembly. It uses 110A18S collated clips and is suitable for professional mattress and bedding production where consistent wire-to-wire clinching is required.
With a net weight of 2.0 kg, an operating pressure of 80–90 PSI and a compact composite housing, the Eclipser 2000-1024 is designed for repetitive production work. The quick-release front plate allows the driver blade to be replaced without tools, helping simplify routine maintenance.
The Eclipser 2000-1024 fastens two compatible wire components together by wrapping and pressing a collated metal clip around the joint. The tool uses strips of clips loaded into a curved magazine and is manually triggered by the operator.
Designed for bedding: Primarily used with 10 mm flat border frames.
110A18S clip compatibility: Designed for the specified Encore E-Clip.
80–90 PSI operating pressure: Suitable for compatible industrial compressed-air systems.
2.0 kg tool weight: Lightweight construction supports repetitive production work.
Quick-release front plate: Allows driver blade replacement without tools.
Constant-force clip feeding: Helps maintain consistent feeding through the curved magazine.
Review the tool specifications before ordering to confirm compatibility with your compressed-air system, clip supply and bedding production requirements.
| Parameter | Specification |
|---|---|
| Model | Eclipser 2000-1024 |
| Product ID | EA2000-1024 |
| Tool Type | Hand-Held Pneumatic Clinch Clip Tool |
| Dimensions | 178 × 102 × 419 mm |
| Net Weight | 2.0 kg (4.4 lbs) |
| Operating Air Pressure | 80–90 PSI (5.5–6.2 bar) |
| Compatible Clip | 110A18S |
| Magazine Format | Curved Magazine |
| Magazine Capacity | 31–47 Clips, Depending on Clip Configuration |
| Clip Feeding Method | Constant-Force Spring |
| Housing | Composite Housing |
| Main Cylinder | 3.06 in (78 mm) Bore, Spring Return |
| Primary Application | Bedding and 10 mm Flat Border Frames |
The Eclipser 2000-1024 is designed for 110A18S clips. Correct tool-to-clip matching is important because different Eclipser models are configured for different clip sizes and fastening applications.
For replacement projects, distributors and bedding manufacturers should confirm the existing tool model and clip reference before ordering. If your current clip is not 110A18S, provide the clip number or dimensions so that the appropriate clinching tool can be checked.
| Selection Item | Eclipser 2000-1024 |
|---|---|
| Compatible Clip | 110A18S |
| Primary Industry | Bedding |
| Typical Application | 10 mm Flat Border Frames |
| Clip Supply Format | Collated Clips in Strips |
| Feature | Benefit |
|---|---|
| Quick-Release Front Plate | Allows the driver blade to be replaced without tools. |
| 2.0 kg Construction | Reduces tool weight during repetitive production work. |
| Contoured Handle | Designed to improve operator grip and comfort. |
| Curved Magazine | Holds collated strips of compatible clips for repetitive fastening. |
| Constant-Force Spring Feed | Maintains clip pressure toward the fastening head as clips are consumed. |
| Composite Housing | Provides a lightweight tool body for industrial handling. |
| Optional Hanger | Can support right- or left-hand workstation configurations when fitted. |
The Eclipser 2000-1024 is primarily configured for bedding production and 10 mm flat border frames. It is intended for open-access fastening locations where the operator can position the clipping head directly around the wire joint.
During operation, the tool wraps and presses the compatible clip around the wire components to create a mechanical connection. Correct clip selection and correct positioning of the fastening head are necessary for consistent clinching.
| Application | Typical Use |
|---|---|
| Bedding Production | Pneumatic clip fastening of compatible wire components used in bedding assemblies. |
| 10 mm Flat Border Frames | Joining compatible border-frame wire components with 110A18S clips. |
| Open-Access Wire Joints | Fastening locations where the standard clipping head can be positioned directly around the joint. |
The tool uses compressed air to drive a compatible clip against the forming components at the clipping head. As the clip is driven, it wraps around and secures the wire joint.
Connect the tool to a suitable compressed-air supply.
Set the operating pressure within the specified 80–90 PSI range.
Load the correct 110A18S collated clip strip into the magazine.
Position the clipping head around the intended wire joint.
Activate the tool to clinch the clip around the wire components.
Inspect the finished connection before continuous production begins.
Different Eclipser models are designed around different clip sizes and production applications. Buyers should confirm the clip reference and material being fastened before selecting a tool.
| Check Before Ordering | What to Confirm |
|---|---|
| Existing Tool Model | Confirm whether the current tool is 2000-1024 or another Eclipser configuration. |
| Clip Reference | The 2000-1024 is configured for 110A18S clips. |
| Wire or Frame Size | Confirm the wire and border-frame dimensions being joined. |
| Application | The 2000-1024 is primarily intended for bedding and 10 mm flat border frames. |
| Air Supply | Confirm a stable compressed-air supply within 80–90 PSI. |
The quick-release front plate is one of the key maintenance features of the Eclipser 2000 series. It allows access to the driver blade without requiring tools for front-plate removal, helping reduce maintenance time when inspection or blade replacement is required.
Disconnect the compressed-air supply before servicing the tool.
Inspect the driver blade and forming components regularly for wear.
Keep the curved magazine and clip feeding path clean.
Use the specified clip type to reduce feeding and clinching problems.
Check pneumatic connections and seals if air leakage is detected.
Operate the tool within the specified 80–90 PSI air-pressure range.
Use clean, dry compressed air suitable for pneumatic production tools.
Load compatible 110A18S clips correctly into the magazine.
Do not operate the tool with damaged or incorrectly collated clips.
Inspect the driver blade and clipping head regularly.
Disconnect the air supply before removing jams or performing maintenance.
Replace worn components when necessary to maintain consistent clinching performance.
| Issue | Possible Cause | Recommended Check |
|---|---|---|
| Clip does not feed correctly | Damaged clips, incorrect clip type or contaminated magazine | Confirm 110A18S clips and inspect the magazine and feeding path. |
| Incomplete clinch | Low air pressure or worn driver components | Check for 80–90 PSI air pressure and inspect the driver blade. |
| Frequent clip jamming | Incorrectly loaded or damaged collated clips | Disconnect the air supply, clear the jam and reload compatible clips correctly. |
| Driver blade wear | Normal production wear | Disconnect the air supply and use the quick-release front plate to access the blade for inspection or replacement. |
| Air leakage | Loose connection or worn pneumatic seal | Stop operation and inspect pneumatic connections and service components. |
KYA Fasteners supplies clinch clip tools and compatible fastening products for bedding manufacturers, furniture and spring-product factories, fastening-tool distributors and industrial users.
When requesting a quotation for the Eclipser 2000-1024, provide the required quantity, destination country and application. For replacement requirements, providing your current tool model and clip reference can help confirm compatibility before ordering.
The Eclipser 2000-1024 is primarily designed for bedding production and 10 mm flat border frames. It pneumatically clinches compatible clips around wire components.
The Eclipser 2000-1024 is designed to use 110A18S clips. Confirm the clip reference before ordering because other Eclipser models use different clip sizes.
The specified operating pressure is 80–90 PSI (5.5–6.2 bar).
The tool weighs approximately 2.0 kg (4.4 lbs).
The listed dimensions are 178 × 102 × 419 mm.
The curved magazine holds approximately 31–47 clips, depending on the clip configuration.
Yes. The tool uses a quick-release front plate designed to provide access to the driver blade without requiring tools to remove the front plate.
An optional hanger can be used with the Eclipser 2000 series and can be configured for right- or left-hand operation. Confirm availability when requesting a quotation.
Check your existing clip reference, wire dimensions and application. The 2000-1024 is specifically associated with 110A18S clips and is primarily used for bedding and 10 mm flat border frames.
Provide the required quantity, destination country, application and clip reference. If replacing an existing tool, include the current tool model or a clear photo of the model identification.
KYA Fasteners has operated since 2003 and exports to more than 50 countries, including the USA, Canada, the UK and Australia. The listed order terms include a one-year warranty and an MOQ of 50 units. OEM options listed for this product include custom color, logo and packaging.
The stated delivery estimate for the USA, EU, Australia and Canada is 20–30 days. Confirm product availability, current lead time, warranty coverage and any customization details for your order when requesting a quotation.
