Clinch Clip Tool Eclipser 2000-1020S is a lightweight hand-held pneumatic clinch clip tool designed for fast clip closure in upholstery, bedding, housing construction panels, wire cage assembly, trap assembly, fencing, netting, cables, and low-clearance fastening applications. It is built for stable clip feeding, comfortable operation, and efficient fastening in industrial production environments.
This pneumatic clip gun uses collated clips in strips and features a quick-release front plate for tool-free driver blade replacement, a curved magazine with 31–47 clip capacity, constant force spring feeding, a contoured handle, composite plastic housing, and 80–90 PSI working pressure. It is compatible with Encore 64A18SG, 71A16SAL, 71A18S, 71A18SG clips and Hartco CLP-15G, CLP-13, CLP-13AL, CLP-13G equivalents.
Quick-release front plate: Allows tool-free driver blade replacement, reducing downtime during maintenance.
Lightweight pneumatic design: 4.4 lbs / 2.0 kg body helps reduce operator fatigue in repeated clip fastening work.
Curved magazine: Holds 31–47 clips depending on clip size, supporting continuous operation in production lines.
Constant force spring feeding: Supports smooth clip feeding and stable clinching performance.
Contoured handle: Improves grip comfort and supports right-handed or left-handed operation with optional hanger.
Low-clearance fastening support: Designed for shorter height clips and tight-access applications such as cages, traps, cables, netting, and panels.
| Specification | Details |
|---|---|
| Model | Clinch Clip Tool Eclipser 2000-1020S |
| Tool Type | Pneumatic Clip Gun / Pneumatic Clinch Clip Tool |
| Dimensions | 7 x 4 x 16.5 in. / 178 x 102 x 419mm |
| Body Material | Composite Plastic, Green |
| Magazine Material | Composite Plastic, Green |
| Magazine Format | Curved Magazine |
| Magazine Capacity | 31–47 clips depending on clip size |
| Clip Feeding Method | Constant Force Spring |
| Primary Power Unit | Main Cylinder, Bore 3.06 in. / 78mm, Spring Return |
| Air Supply | 80–90 PSI / 5.5–6.2 BAR |
| Weight | 4.4 lbs / 2.0 kg |
| Compatible Clips | Encore 64A18SG, 71A16SAL, 71A18S, 71A18SG; Hartco CLP-15G, CLP-13, CLP-13AL, CLP-13G equivalents |
| Main Applications | Upholstery, bedding, housing construction panels, wire cages, traps, fencing, netting, cables, enclosures, and mattress assembly |
The Eclipser 2000-1020S is designed for A-width clinch clips and selected shorter-height clips where low clearance access is required. Before ordering, confirm clip width, wire gauge, strip format, application material, and tool jaw configuration.
| Clip Reference | Equivalent / Notes |
|---|---|
| Encore 64A18SG | Equivalent to Hartco CLP-15G; used for cages, enclosures, fencing, agriculture, traps, and wire fastening applications. |
| Encore 71A16SAL | Equivalent to Hartco CLP-13AL; suitable for selected low-clearance and marine-grade clip applications. |
| Encore 71A18S | Equivalent to Hartco CLP-13; common for bedding, construction panels, cages, cables, and wire fastening. |
| Encore 71A18SG | Equivalent to Hartco CLP-13G; suitable for fencing, enclosures, cages, traps, agriculture, and netting use. |
Clinch Clip Tool Eclipser 2000-1020S is used for fastening two wires or materials together by wrapping and pressing clips around them. It is suitable for factories, workshops, cage manufacturers, furniture manufacturers, bedding producers, fencing suppliers, construction panel manufacturers, aquaculture trap producers, and industrial fastening distributors.
Upholstery and furniture manufacturing
Mattress, bedding, box spring, and spring unit assembly
Housing construction panels and wire fastening for building panels
Wire cage, animal cage, trap, tray, and aquaculture cage assembly
Fencing, enclosures, razor wire, netting, and nursery applications
Cables, bungee cords, wires, tags, and tight-access clip fastening
Explore Related Clinch Clip Tools
The 2000-1020S model is useful where standard clip tools are difficult to position. Its short-clip compatibility and clinching head design help operators access cages, traps, cable assemblies, enclosures, narrow wire grids, and compact panel structures.
| Use Case | Why 2000-1020S Helps |
|---|---|
| Wire Cages and Traps | Supports access to tight cage corners, wire intersections, trap frames, and narrow grid structures. |
| Housing Panels | Helps fasten wires and components in panel structures where clearance is limited. |
| Cables and Bungee | Suitable for clip closure around cables, wires, tags, and cord-based fastening points. |
| Fencing and Netting | Useful for enclosures, mesh, wire fencing, netting, nursery frames, and agriculture-related fastening. |
| Operation Factor | Recommendation |
|---|---|
| Working Pressure | Use 80–90 PSI / 5.5–6.2 BAR air supply for stable clinching performance. |
| Air Quality | Use clean, dry compressed air and follow tool maintenance requirements to reduce valve and cylinder wear. |
| Clip Loading | Load compatible collated strip clips into the curved magazine and confirm smooth spring pressure before use. |
| Maintenance | Use the quick-release front plate for faster driver blade replacement and routine inspection. |
| Selection Factor | What to Check |
|---|---|
| Application | Choose tool model according to bedding, upholstery, cages, traps, cables, fencing, netting, housing panels, or construction panels. |
| Clip Compatibility | Confirm compatible clip references such as 64A18SG, 71A16SAL, 71A18S, 71A18SG, CLP-15G, CLP-13, CLP-13AL, or CLP-13G. |
| Clearance | For tight-access or low-clearance fastening, choose a model designed for shorter height clips and narrow workspaces. |
| Air Supply | Confirm compressor output can provide stable 80–90 PSI / 5.5–6.2 BAR operating pressure. |
| Production Volume | For high-volume work, prioritize magazine capacity, feeding stability, operator comfort, spare parts availability, and maintenance speed. |
For clinch clip tool distributors, bedding factories, cage manufacturers, upholstery factories, construction panel plants, fencing suppliers, trap manufacturers, and fastening tool wholesalers, the key purchasing factors are compatible clip range, tool durability, operator comfort, spare parts support, stable air performance, and production efficiency.
Compatible with common Encore and Hartco clip references for industry-standard clip fastening.
Quick-release front plate supports faster maintenance and lower production downtime.
Lightweight 4.4 lbs body supports repeated operation in production environments.
Curved magazine and constant force spring help maintain smooth clip feeding.
Suitable for OEM supply, tool distributors, replacement tool programs, and factory production lines.
KYA Fasteners supplies clinch clip tools, hog ring tools, C ring tools, pneumatic pliers, clips, hog rings, staples, nails, nailers, staplers, and industrial fastening products for global B2B customers. For the Eclipser 2000-1020S clinch clip tool, KYA focuses on tool compatibility, clip matching, spare part support, stable operation, and export supply service.
Application matching: Tool model, clip type, clip size, air pressure, and application material can be matched according to production needs.
Clip compatibility support: KYA can help confirm compatibility with Encore and Hartco clip equivalents before bulk purchase.
Industrial supply capability: Suitable for importers, wholesalers, fastening tool distributors, bedding factories, cage factories, and upholstery manufacturers.
OEM service: Packaging, carton marks, spare parts support, and export packing can be discussed for B2B orders.
It is used for upholstery, bedding, mattress assembly, housing construction panels, wire cage assembly, trap assembly, fencing, netting, cables, enclosures, and low-clearance clip fastening.
It is compatible with Encore 64A18SG, 71A16SAL, 71A18S, 71A18SG clips and Hartco CLP-15G, CLP-13, CLP-13AL, CLP-13G equivalent clips.
The curved magazine holds 31–47 clips depending on clip size. Always confirm clip reference and strip configuration before production use.
The recommended air supply is 80–90 PSI / 5.5–6.2 BAR. Clean and dry compressed air helps improve tool reliability and service life.
The quick-release front plate allows tool-free driver blade replacement, which saves maintenance time and helps reduce downtime in high-volume production environments.
Yes. The 2000-1020S is suitable for shorter height clips and tight-access fastening, including cages, traps, panels, cables, enclosures, and netting applications.
Yes. An optional hanger can support flexible right-handed or left-handed operation depending on the operator’s working position and production setup.
Choose according to clip reference, clip width, wire gauge, application material, clearance space, air supply, and production volume. If you use 64A18SG, 71A16SAL, 71A18S, or 71A18SG clips, the 2000-1020S can be considered.
Yes. KYA can help match clinch clip tools with compatible clips, including industrial clips for bedding, cages, fencing, panels, netting, cables, traps, and upholstery applications.
