Home / Tools / Cordless Nailer

Cordless Nailer

Cordless Nailers and Staplers for Professional Fastening

KYA Fasteners supplies battery-powered fastening tools for construction contractors, equipment distributors, fencing installers and industrial buyers. The cordless range includes the LD3490 34-degree framing nailer, the LDFS16G 16-gauge fencing stapler and the LD40 concrete strip pin nailer. Each model is designed for a different type of fastener and installation task.

Unlike conventional pneumatic tools, these cordless models do not require an external compressor or air hose during operation. Choose a model according to the workpiece, fastener dimensions, magazine type, battery specification and required fastening method rather than selecting by voltage alone.

Request Cordless Tool Pricing

Choose the Right KYA Cordless Fastening Tool

KYA Model Tool Type Compatible Fastener Main Applications
LD3490 20V cordless framing nailer 34° paper-collated clipped-head framing nails Wood framing, subflooring, roof decking, pallets and wood fencing
LDFS16G 20V cordless fencing stapler 16GA glue-collated fencing staples Livestock fencing, wire mesh, pet enclosures and vineyard trellising
LD40 20V cordless concrete pin nailer Plastic-collated concrete pins Drywall tracks, pipe clamps and selected concrete or steel fastening

A fencing stapler drives U-shaped staples, a framing nailer drives collated framing nails, and a concrete pin nailer drives hardened pins. These consumables are not interchangeable. Buyers should identify the exact tool and fastener specification before placing a combined tool-and-fastener order.

Cordless Nailer and Stapler Technical Specifications

Specification LD3490 Framing Nailer LDFS16G Fencing Stapler LD40 Concrete Nailer
Nominal voltage 20V DC 20V DC 20V DC
Fastener type 34° paper-collated framing nails 16GA glue-collated fencing staples Plastic-collated concrete pins
Fastener length 50–90 mm (2–3 1/2 in.) 19–25 mm (3/4–1 in.) 16–38 mm
Fastener diameter / gauge 0.113–0.131 in. 16 gauge 2.7–3.0 mm
Magazine capacity 50 nails 100 staples 30 pins
Battery capacity used for published output 4.0Ah 2.0Ah 4.0Ah
Published output per charge Up to 750 nails Up to 1,300 staples Up to 950 cycles
Recharge time stated on product page About 90 min (4.0Ah) About 45 min About 90 min (4.0Ah)
Motor Brushless See model details Brushless
Typical users Framing contractors; timber packaging producers Fencing contractors; agricultural suppliers Drywall and MEP installers; construction contractors

Operating note: Published battery output varies with battery condition, driving resistance, fastener size and the working environment. Battery and charger inclusion should be confirmed for the quoted package. The three tools use different consumables, and a common 20V rating alone does not establish cross-model battery compatibility.

34-Degree Cordless Framing Nailer LD3490

The KYA LD3490 is a 20V brushless framing nailer for 34-degree paper-collated clipped-head nails measuring 50–90 mm (2–3 1/2 in.) in length and 0.113–0.131 in. in diameter. Its magazine holds 50 nails. Applications include wood framing, subflooring, roof decking, wood fencing and selected industrial timber assembly.

According to the model specifications, the LD3490 provides selectable firing modes and tool-free depth adjustment. KYA states up to 750 fasteners per charge with a 4.0Ah battery. Nail head style, shank diameter and collation must all match the tool specification; nail angle alone is not sufficient for compatibility.

16-Gauge Cordless Fencing Stapler LDFS16G

The KYA LDFS16G is a 20V battery-operated tool for 16-gauge glue-collated fencing staples between 3/4 and 1 in. (approximately 19–25 mm) in length. It carries 100 staples and is suited to livestock fencing, mesh fastening, pet enclosures, vineyard trellising and related agricultural fencing work.

Its model page lists sequential and bump firing modes, depth adjustment, a wire-alignment notch, LED light and jam release. KYA publishes up to 1,300 staples per charge with a 2.0Ah battery. This model uses fencing staples and should not be supplied with framing nails or concrete pins.

LD40 Cordless Concrete Strip Pin Nailer

The KYA LD40 is a 20V brushless concrete fastening tool for plastic-collated pins from 16 to 38 mm in length and 2.7 to 3.0 mm in diameter. Its magazine holds 30 pins. It is intended for work such as drywall track installation, pipe and cable clamp fixing, wooden battens and selected light-duty fixtures on suitable concrete or steel substrates.

KYA lists up to 950 cycles on a 4.0Ah battery under the specified operating conditions. Suitability depends on substrate condition, fixture thickness, correct fastener selection and trial fastening. Fastenings with structural or safety-critical requirements must be assessed against the applicable project specifications rather than assumed suitable solely from the tool category.

Ask About the LD40 and Compatible Pins

Cordless vs. Pneumatic Nailers: Purchasing Considerations

Selection Factor Cordless Fastening Tools Pneumatic Fastening Tools
Power supply Battery-powered, without an external air hose External compressed-air supply and hose
Jobsite mobility Useful for distributed or hard-to-access fastening locations Useful where suitable compressed-air infrastructure is available
Routine planning Battery charging, spare battery availability and tool maintenance Compressor capacity, hose setup, air pressure and tool maintenance
Tool and fastener matching Match battery platform and each model’s specified consumable Match operating pressure, magazine and specified consumable
Purchase evaluation Review tool-only versus kit contents and battery provision Review compressor requirements and fittings

The appropriate choice depends on use frequency, mobility, service requirements, fastener availability and the site’s power infrastructure. Cordless operation does not make every tool suitable for every framing, fencing or concrete installation.

Compatible Nails, Staples and Concrete Pins

Fastener compatibility is a primary requirement for distributors stocking both tools and consumables. For each model, confirm the specified gauge or diameter, length, head shape, collation method and loading arrangement. The following information can be used when requesting a matched supply quotation.

  • LD3490: 34-degree paper-collated clipped-head framing nails, 50–90 mm in length, 0.113–0.131 in. diameter.

  • LDFS16G: 16-gauge glue-collated fencing staples, 3/4–1 in. in length; verify crown profile and strip compatibility for the selected SKU.

  • LD40: plastic-collated concrete pins, 16–38 mm in length and 2.7–3.0 mm in diameter; select for the intended substrate and fixing assembly.

For additional fastener categories, view KYA Framing Nails and Concrete Nails. Final compatibility should be confirmed against the relevant cordless model rather than assumed from a broad fastener-category listing.

Wholesale Cordless Nailer Ordering Information

When requesting prices for distribution or construction procurement, include the intended tool models, destination market, required quantity, fastening application and expected fastener consumption. Ask KYA to specify the exact package contents, such as bare tool, battery, charger and any included accessories, for each quotation.

  • Tool model and quantity: LD3490, LDFS16G or LD40.

  • Battery capacity, charging voltage and required kit configuration.

  • Compatible nail, staple or concrete pin dimensions and estimated consumption.

  • Application details: timber, fence wire, concrete, steel or fixing assembly.

  • Service requirements, spare parts and distributor documentation.

KYA Fasteners provides product and fastener information for importers, wholesalers, specialist distributors and professional contractors. Contact the sales team with the model and fastener requirements to obtain a quotation.

Request Bulk Pricing and Product Details

Frequently Asked Questions About Cordless Nailers

What cordless nailers and staplers does KYA offer?

The current KYA category includes the LD3490 34-degree cordless framing nailer, LDFS16G 16-gauge cordless fencing stapler and LD40 cordless concrete strip pin nailer. They are designed for different fastener systems and applications.

Are all KYA cordless nailers compatible with the same fasteners?

No. The LD3490 uses specified 34-degree paper-collated framing nails, the LDFS16G uses 16-gauge glue-collated fencing staples, and the LD40 uses plastic-collated concrete pins. Match the full fastener specification to the tool.

Which KYA cordless tool is suitable for wood framing?

The LD3490 is designed for wood framing, subflooring, roof decking and selected timber assembly. It accepts specified 34-degree paper-collated framing nails from 50 to 90 mm.

Which cordless tool should a fencing contractor choose?

The LDFS16G is intended for wire and mesh fencing with compatible 16-gauge fencing staples. The LD3490 is a different product for framing nails and selected wood fencing applications.

Can the LD40 be used on concrete and steel?

The LD40 is designed for selected concrete and steel fastening tasks when used with the correct pins and conditions. The substrate and fixing assembly should be evaluated, and trial fastenings should be completed before production use.

How many fasteners can these cordless tools drive per battery charge?

KYA publishes up to 750 nails for the LD3490 with a 4.0Ah battery, up to 1,300 staples for the LDFS16G with a 2.0Ah battery, and up to 950 cycles for the LD40 with a 4.0Ah battery. Results vary by application and operating conditions.

Do cordless nailers need an air compressor or fuel cartridge?

The three battery-powered KYA models listed here do not need an external air compressor, air hose or separate fuel cell for normal operation. Follow each model’s operating and maintenance instructions.

Can the batteries be used across all three KYA models?

Do not assume batteries are interchangeable because tools share a 20V voltage rating. Confirm the battery interface, battery model and charger compatibility with KYA for each selected tool.

Are the battery and charger included when ordering?

Package contents depend on the exact quoted configuration. Ask whether the offer includes the tool only or a complete package with batteries, charger and accessories.

What information should distributors provide for a wholesale quotation?

Provide model numbers, required quantities, destination market, kit configuration and compatible fastener requirements. Application and substrate details can also help determine the appropriate model and consumables.

Contact KYA Fasteners for Cordless Tool Supply

KYA Fasteners works with overseas importers, distributors and professional buyers sourcing battery-powered fastening tools and compatible consumables. Share the models and application details required for your market to discuss purchasing options and technical suitability.

Contact KYA Fasteners

Apply Our Best Quotation

TOOLS

FASTENERS

FURNITURE ACCESSORIES

OFFICE SUPPLIES

PACKAGING MATERIAL

WIRE

QUICK LINKS

Copyright ©  2026 Changzhou KYA Fasteners Co.,Ltd. All rights reserved.