LD40 Cordless Concrete Strip Pin Nailer is a fully electric, battery-powered concrete nailer designed for fastening drywall track, water pipes, wooden keel, pipe clamps, seat clamps, elevator fixtures, doors, windows, and light-duty construction components into concrete and steel substrates.
Powered by a 20V brushless motor, the LD40 eliminates the need for fuel cells and powder loads, helping reduce consumable cost, jobsite preparation time, and maintenance downtime. It accepts plastic-collated concrete nails from 16mm to 38mm in length and 2.7mm to 3.0mm in diameter, with a 30-pin magazine and up to 950 cycles per 4.0Ah battery charge.
20V brushless motor: Delivers efficient cordless performance without fuel cells, gas cartridges, powder loads, or compressor setup.
Concrete and steel fastening: Designed for drywall track, pipe clamp, keel, door/window, water pipe, and light-duty fixture installation.
Plastic-collated concrete nails: Accepts 16mm–38mm concrete nails with 2.7mm–3.0mm shank diameter.
30-pin magazine: Supports continuous fastening and helps improve jobsite productivity.
Field-serviceable driver blade: Wearable parts can be replaced easily, helping reduce maintenance downtime.
High battery output: Up to 950 cycles per 4.0Ah battery charge, with 90-minute recharge time.
Adjustable fastening power: Up to 120J power output, adjustable to 130psi for different concrete and steel substrate conditions.
Quick-release magazine: Helps operators clear jams faster and continue installation work with less interruption.
| Specification | Details |
|---|---|
| Model | LD40 |
| Product Name | LD40 Cordless Concrete Strip Pin Nailer |
| Tool Type | Cordless Concrete Nailer / Battery Concrete Pin Nailer |
| Fastener Type | Plastic-Collated Concrete Nails |
| Fastener Length Range | 0.630"–1.496" / 16mm–38mm |
| Fastener Diameter Range | 0.106"–0.118" / 2.7mm–3.0mm |
| Rated Voltage | DC 20V |
| Motor | Brushless Motor |
| Magazine Capacity | 30 Pins |
| Cycles Per Charge | Up to 950 cycles per 4.0Ah battery charge at 100psi |
| Battery Recharge Time | 90 minutes for 4.0Ah battery |
| Power Output | Up to 120J, adjustable to 130psi |
| Weight | 4.25kg / 9.37lbs |
| Dimensions | 394 x 386 x 116mm / 15.5 x 15.2 x 4.6 in. |
| Main Applications | Drywall track installation, water pipe installation, wooden keel installation, elevator fixing, seat clamp fixing, door/window installation, and pipe clamp fixing |
| Substrates | Concrete and steel substrates, depending on fastener selection and jobsite conditions |
The LD40 cordless concrete nailer is designed for contractors, drywall installers, MEP installers, pipe fixing teams, interior construction crews, door and window installers, and construction tool distributors that need fast concrete and steel fastening without fuel cells.
Drywall track installation into concrete and steel substrates
Water pipe installation and pipe clamp fixing
Wooden keel installation and light-duty framing support
Elevator fixing and selected construction fixture installation
Seat clamp fixing and bracket fastening
Door and window installation support
Electrical, MEP, cable, and light utility fastening work where compatible pins and base materials are used
The LD40 uses a fully electric drive system instead of fuel cells. For construction teams, this can reduce recurring consumable purchases, avoid gas cartridge storage issues, simplify jobsite logistics, and support more consistent fastening in daily installation work.
| Feature | Buyer Benefit |
|---|---|
| No Fuel Cells | Reduces consumable cost and removes the need to manage gas cartridges on site. |
| 20V Battery Platform | Supports cordless mobility for drywall, MEP, door/window, and fixture installation teams. |
| Brushless Motor | Improves energy efficiency and supports stable fastening output. |
| Up to 950 Cycles | Supports longer work sessions per 4.0Ah battery charge. |
The LD40 uses plastic-collated concrete nails. Before bulk ordering, confirm nail length, nail diameter, collation type, substrate hardness, fastening material thickness, and required pull-out performance.
| Fastener Factor | Recommendation |
|---|---|
| Collation Type | Use plastic-collated concrete nails designed for strip pin nailers. |
| Nail Length | Select from 16mm to 38mm according to substrate type, material thickness, and required embedment. |
| Nail Diameter | Use 2.7mm–3.0mm diameter nails according to the tool specification and application requirement. |
| Base Material | Test fastening performance on actual concrete or steel substrate before large-volume installation. |
| Magazine Capacity | Use compatible strips for the 30-pin magazine to maintain stable feeding and reduce jams. |
The LD40 is designed for field service and jobsite productivity. Wearable parts can be replaced by removing 5 screws, while the driver blade is field-serviceable and the magazine has quick-release access for easier jam clearing.
| Maintenance Feature | Benefit |
|---|---|
| Field-Serviceable Driver Blade | Helps reduce downtime and supports easier replacement during jobsite use. |
| 5-Screw Wear Part Replacement | Simplifies routine maintenance and replacement of wearable parts. |
| Quick-Release Magazine | Allows faster jam clearing and improves continuity in installation work. |
| Interchangeable Nose Pieces | Supports versatility across different fastening positions and application requirements. |
| Selection Factor | What to Check |
|---|---|
| Application | Choose according to drywall track, pipe clamp, keel, water pipe, door/window, steel track, electrical, MEP, or light fixture installation. |
| Power System | Use a fully electric model when reducing fuel-cell cost, gas storage, and compressor setup is important. |
| Fastener Range | Confirm nail length, diameter, collation, material, and substrate compatibility before ordering. |
| Battery Runtime | Check cycles per charge, recharge time, battery quantity, and charging setup for daily jobsite work. |
| Maintenance | Prioritize driver blade access, wear part replacement, jam clearing, and spare part support for high-volume users. |
| Bulk Supply | For distributors and contractors, confirm tool packaging, battery configuration, concrete nail supply, spare parts, and OEM service options. |
For tool distributors, construction suppliers, drywall contractors, MEP installers, hardware wholesalers, and private-label fastening tool brands, the key purchasing factors are battery runtime, fuel-free operation, nail compatibility, maintenance speed, spare parts support, and stable fastening performance.
20V brushless cordless design eliminates fuel-cell purchases and compressor dependence.
16mm–38mm plastic-collated concrete nail compatibility covers common drywall track and fixture fastening work.
Up to 950 cycles per 4.0Ah battery charge supports productive daily installation work.
Quick-release magazine and field-serviceable driver blade help reduce downtime.
Tool, fastener, spare parts, packaging, and OEM supply support can be discussed for B2B orders.
KYA Fasteners supplies cordless nailers, concrete nailers, nail guns, concrete nails, coil nails, framing nails, roofing nails, staples, hog rings, clips, and industrial fastening products for global B2B customers. For the LD40 cordless concrete strip pin nailer, KYA focuses on tool-fastener matching, jobsite productivity, spare part support, stable supply, and export packaging service.
Application matching: Tool model, concrete nail size, substrate type, fastening material, and battery configuration can be matched according to project needs.
Fastener compatibility support: KYA can help confirm compatible plastic-collated concrete nails before bulk ordering.
Industrial supply capability: Suitable for importers, wholesalers, contractor supply channels, construction tool brands, and fastening distributors.
OEM service: Packaging, carton marks, spare parts support, accessory matching, and export packing can be discussed for B2B orders.
It is used for drywall track installation, water pipe installation, wooden keel installation, elevator fixing, seat clamp fixing, door and window installation, pipe clamp fixing, and selected concrete or steel fastening applications.
The LD40 uses plastic-collated concrete nails from 16mm to 38mm in length and 2.7mm to 3.0mm in diameter.
Yes. The LD40 is designed for concrete and steel substrates when the correct concrete nails, power setting, and jobsite conditions are used. Test fastening performance on actual substrate before large-volume installation.
A cordless electric concrete nailer eliminates fuel cells and compressor setup, helping reduce consumable cost, simplify logistics, and improve mobility for drywall, MEP, and fixture installation teams.
The LD40 magazine holds 30 pins, helping support continuous fastening in drywall track, pipe clamp, keel, and light fixture installation work.
A 4.0Ah battery supports up to 950 cycles at 100psi, and the battery recharge time is about 90 minutes.
Yes. The LD40 has a field-serviceable driver blade, quick-release magazine, and maintenance design that allows wearable parts to be replaced by removing 5 screws.
Yes. The LD40 delivers up to 120J of power and can be adjusted to 130psi to match different fastening conditions.
Yes. KYA can help match the LD40 cordless concrete nailer with compatible plastic-collated concrete nails, spare parts, accessories, and export packaging for B2B orders.
