The Eclipser 2800-1022 is a hand-held, manually triggered coil-fed pneumatic clinch clip tool designed primarily for high-volume bedding and mattress production. It fastens compatible wire components by wrapping and pressing a collated metal clip around the joint.
Unlike manually loaded strip-fed clinching tools, the Eclipser 2800 system receives collated clips from a continuous coil clip system. The clips pass through a straight steel magazine into the fastening head, making the system suitable for repetitive production where frequent strip reloading would interrupt workflow.
The EA2800-1022 is compatible with 76A22R, 80A22R, 85A22R and 88A22R roll clips. It also incorporates a quick-release front plate, auxiliary Blade Jam Release air valve and tool hanger for professional production use.
Continuous coil feeding: Designed for production lines where reducing clip-loading interruptions is important.
Four compatible A22R clips: Uses 76A22R, 80A22R, 85A22R and 88A22R roll clips.
Straight steel magazine: Guides continuous collated clips from the external coil system into the tool.
Quick-release front plate: Provides tool-free access for driver-blade servicing.
Blade Jam Release valve: Auxiliary air valve assists when releasing a jammed driver blade.
80–90 PSI operating pressure: Suitable for compatible industrial compressed-air systems.
Included hanger: Supports suspended workstation operation and can accommodate different operator positions.
Review the specifications below when replacing an existing 2800-1022 or evaluating a coil-fed clinching system for bedding production.
| Parameter | Specification |
|---|---|
| Model | EA2800-1022 |
| Series | Eclipser 2800 |
| Brand | ENCORE |
| Tool Type | Coil-Fed Pneumatic Clinch Clip Tool |
| Tool Dimensions | 203 × 190 × 381 mm |
| Net Weight | 3.2 kg (7.0 lbs) |
| Operating Air Pressure | 80–90 PSI (5.5–6.2 bar) |
| Compatible Clips | 76A22R, 80A22R, 85A22R, 88A22R |
| Clip Format | Continuous Roll / Coil |
| Magazine Format | Straight Steel Magazine |
| Clip Feeding Method | Single-Acting Spring-Extended Cylinder |
| Main Cylinder | 3.06 in (78 mm) Bore, Spring Return |
| Housing | Composite Body |
| Magazine Material | Steel |
| Hanger | Included |
| Blade Jam Release | Auxiliary Air Valve Included |
| Primary Application | Bedding and Mattress Fabrication |
The Eclipser 2800-1022 uses A-width 22-gauge continuous roll clips. The exact clip should be selected according to the wire combination and required closed-clinch geometry.
| Encore Clip | Hartco Reference | Published Clip Quantity | Open Dimensions |
|---|---|---|---|
| 76A22R | — | 12,300 | 12.7 × 11 × 7.4 mm |
| 80A22R | — | 13,700 | 13.2 × 11 × 7.4 mm |
| 85A22R | CCP-33 | 12,300 | 13.6 × 11 × 7.4 mm |
| 88A22R | CCP-32 | 12,300 | 14 × 11 × 7.4 mm |
The published clip quantity varies with the selected roll clip. It should not be confused with the capacity of the tool magazine because the continuous coil is supported externally and feeds clips through the straight magazine.
The Eclipser 2800 differs from strip-fed clinching tools because the collated clips are supplied from an external continuous coil. The coil is normally mounted on a supporting frame or gantry, and the collated clip chain travels along a guide track into the tool's straight steel magazine.
This configuration reduces manual clip-strip changes and is suited to repetitive bedding production where the same wire-clinching operation is performed continuously.
| System Component | Function |
|---|---|
| Eclipser 2800 Tool | Pneumatically drives and forms the clip around the wire joint. |
| Continuous Clip Coil | Provides a large supply of collated roll clips for repetitive fastening. |
| Coil Support / Gantry | Supports the clip roll and feeds the clip chain toward the tool. |
| Straight Magazine | Guides the collated clips into the clipping head. |
| Tool Balancer / Hanger | Supports the tool at the workstation during repetitive operation. |
The Eclipser 2800-1022 tool and A22R clip family are primarily associated with bedding and mattress fabrication. The tool is used where compatible wire components need to be mechanically joined with a formed clinch clip.
Typical buyers include mattress manufacturers, bedding spring-unit producers, production-line integrators, fastening-tool distributors and maintenance departments replacing existing Hartco or Encore coil-fed clinching equipment.
The Eclipser 2800-1022 is an earlier configuration in the 2800 continuous-coil tool family. Encore currently identifies the Eclipser 2800-3322 as the replacement model for the 2800-1022.
The replacement model remains associated with the same A22R clip family: 76A22R, 80A22R, 85A22R and 88A22R. Buyers replacing older equipment should provide the complete model number and current clip reference so the correct tool, replacement parts and clip compatibility can be confirmed.
| Item | 2800-1022 | 2800-3322 |
|---|---|---|
| Status | Earlier Model | Current Replacement Model |
| Feed System | Continuous Coil | Continuous Coil |
| Compatible Clip Family | 76A22R / 80A22R / 85A22R / 88A22R | 76A22R / 80A22R / 85A22R / 88A22R |
| Primary Application | Bedding | Mattress Fabrication |
The operator positions the clipping head around the compatible wire components and manually activates the pneumatic tool. A roll clip is fed through the straight magazine into the head, where the driver and forming components wrap and press the clip around the wire joint.
Install the correct A22R continuous coil for the application.
Route the clip chain correctly through the coil system and straight magazine.
Connect the tool to a clean compressed-air supply.
Set operating pressure within the specified 80–90 PSI range.
Position the clipping head around the required wire joint.
Activate the tool to form the clip around the wire components.
Inspect the finished clinch before starting continuous production.
The quick-release front plate is designed to provide access to the driver blade without requiring tools to remove the front plate. This helps simplify routine inspection and driver-blade replacement.
The 2800 series also includes an auxiliary Blade Jam Release air valve. This valve assists the operator or maintenance technician when releasing a jammed driver blade. The compressed-air supply should always be isolated before carrying out manual inspection or service work.
Use the correct 76A22R, 80A22R, 85A22R or 88A22R clip for the wire combination being fastened.
Operate the tool within the specified 80–90 PSI pressure range.
Use clean and dry compressed air suitable for pneumatic production equipment.
Check that the continuous clip chain travels freely through the feed track and straight magazine.
Inspect the driver blade and forming components regularly for wear.
Keep the magazine and clip feed path clean.
Disconnect the air supply before manually clearing jams or opening the front plate.
Replace worn parts with components matched to the exact tool configuration.
| Issue | Possible Cause | Recommended Check |
|---|---|---|
| Driver blade jam | Clip misalignment or feed problem | Stop production, use the Blade Jam Release function as applicable and inspect the clip feed path. |
| Clip does not feed consistently | Coil routing, magazine contamination or damaged collation | Check the continuous coil path, guide track and straight magazine. |
| Incomplete clinch | Low air pressure or worn forming components | Confirm 80–90 PSI operating pressure and inspect the driver and forming parts. |
| Frequent clip damage | Incorrect clip specification or poor coil alignment | Confirm the required A22R clip and inspect coil alignment. |
| Driver blade wear | Normal production wear | Disconnect the air supply and use the quick-release front plate to inspect the blade. |
| Air leakage | Loose pneumatic fitting or worn seal | Stop operation and inspect pneumatic connections and service components. |
KYA Fasteners supplies clinch clip tools and compatible fasteners for mattress manufacturers, bedding factories, industrial fastening distributors, production-line maintenance teams and professional users.
For an existing 2800-1022 installation, provide the complete tool model, current clip number and photos of the tool identification when requesting replacement equipment or service parts. If a new system is being evaluated, provide the wire dimensions, fastening application, production volume and required clip specification.
The Eclipser 2800-1022 is primarily used for bedding and mattress fabrication. It is a continuous-coil pneumatic tool designed to clinch compatible metal clips around wire components.
The compatible continuous-roll clips are 76A22R, 80A22R, 85A22R and 88A22R.
The published cross-reference identifies 85A22R as CCP-33 and 88A22R as CCP-32. Buyers using 76A22R or 80A22R should reference those Encore clip numbers directly when confirming compatibility.
No. The 2800 system uses a continuous roll of clips supported externally. The clips are fed from the coil through a guide system and the tool's straight magazine. Published clip quantities vary according to the selected roll clip.
The listed operating pressure is 80–90 PSI (5.5–6.2 bar).
The auxiliary Blade Jam Release air valve is designed to assist when releasing a jammed driver blade. It is a standard feature of the Eclipser 2800 system.
The Eclipser 2800 uses a straight steel magazine designed for clips supplied by the continuous-coil system.
Encore currently identifies the Eclipser 2800-3322 as the replacement for the 2800-1022.
The current 2800-3322 is specified for 76A22R, 80A22R, 85A22R and 88A22R. Confirm the exact wire application and existing tool configuration before replacing older equipment.
Provide the complete tool model, clip number, required quantity, wire dimensions, destination country and clear photos of the existing tool identification if available.
KYA Fasteners has operated since 2003 and exports to more than 50 countries, including the USA, Canada, the UK and Australia. The product listing states a one-year warranty and an MOQ of 50 units. OEM options listed for this product include custom color, logo and packaging.
The stated delivery estimate for the USA, EU, Australia and Canada is 20–30 days. Confirm availability, current lead time, warranty coverage and customization details for the order when requesting a quotation.
