The Eclipser 2800-1121, model EA2800-1121, is a coil-fed pneumatic clinch clip closure tool for mattress border wire and other compatible wire-clinching operations. It operates at a published 80–90 PSI (5.5–6.2 bar), weighs 7.0 lbs / 3.2kg and uses a continuous clip coil system with approximately 9,375–10,000 clips per roll, depending on clip size.
The tool is published for Encore 88A23R, 91A23R and 96A23R clips, corresponding to Hartco references CCP-14S, CCP-14 and CCP-9. Its quick-release front plate, Blade Jam Release auxiliary air valve and reversible hanger are designed for maintenance access and repetitive production use.
Request Eclipser 2800-1121 Pricing
| Parameter | Specification |
|---|---|
| Product | Eclipser 2800-1121 Clinch Clip Tool |
| Model / Code | EA2800-1121 |
| Tool Type | Coil-Fed Pneumatic Clinch Clip Closure Tool |
| Brand Reference | Encore |
| Published Tool Dimensions | 203 × 190 × 381mm |
| Net Weight | 7.0 lbs / 3.2kg |
| Operating Air Pressure | 80–90 PSI / 5.5–6.2 bar |
| Clip Feed | Continuous Coil System |
| Published Coil Capacity | Approximately 9,375–10,000 clips per roll, depending on clip size |
| Encore Clip References | 88A23R / 91A23R / 96A23R |
| Hartco References | CCP-14S / CCP-14 / CCP-9 |
| Published Primary Application | Mattress fabrication and 5mm border wire clinching |
| Maintenance Features | Quick-release front plate and auxiliary Blade Jam Release air valve |
| Hanger | Reversible for right- or left-hand positioning |
Clip selection is one of the most important purchasing checks for the Eclipser 2800-1121. Use the exact published clip reference rather than selecting a clinch clip only by appearance or approximate dimensions.
| Encore Clip | Hartco Reference | Ordering Note |
|---|---|---|
| 88A23R | CCP-14S | Confirm this exact clip reference when replacing an existing CCP-14S setup. |
| 91A23R | CCP-14 | Use the exact clip identification to confirm tool and application matching. |
| 96A23R | CCP-9 | Confirm clip size and joint configuration before changing from another clip model. |
The three clip references are not interchangeable merely because they are used within the same Eclipser tool family. Select the clip according to the wire combination, finished clinch geometry and existing production setup.
Encore currently identifies the Eclipser 2800-3321 as the replacement for the 2800-1121. Buyers replacing an existing 2800-1121 should provide the current tool identification, clip model and application when requesting a replacement tool.
The current replacement reference continues to use 88A23R, 91A23R and 96A23R clip references and the corresponding CCP-14S, CCP-14 and CCP-9 Hartco references. Confirm the required tool version before purchasing parts or replacement equipment.
The Eclipser 2800 series uses a continuous coil clip system feeding clips into the tool magazine. The published capacity is approximately 9,375 to 10,000 clips per roll, depending on the selected clip size.
For production-line planning, confirm the selected clip model, coil configuration and feeding system together. Coil capacity can vary with clip size and should not be treated as one fixed quantity for every clip reference.
The published operating air supply for the Eclipser 2800-1121 is 80–90 PSI / 5.5–6.2 bar. The factory air system should provide clean and stable compressed air within the specified operating range.
If clinching performance changes, inspect air pressure together with clip alignment, driver condition and feed setup rather than increasing pressure beyond the published operating range.
The quick-release front plate provides access to the driver area for inspection and driver blade replacement. This allows maintenance personnel to reach a common wear component without unnecessary tool disassembly.
Before maintenance, isolate the compressed-air supply and follow the applicable operating and service instructions for the tool.
The Eclipser 2800-1121 includes an auxiliary Blade Jam Release air valve intended to assist with a jammed driver blade.
Repeated jams should also prompt inspection of the clip model, clip alignment, feed system and driver condition. Use the correct clip reference for the selected tool configuration.
The published tool weight is 7.0 lbs / 3.2kg. The Eclipser 2800 platform combines a composite housing with a metal clip magazine and is designed for manually triggered production work.
The included hanger can be repositioned for right- or left-hand use according to the workstation layout.
Mattress fabrication and 5mm border wire are the primary published applications associated with this clip-tool configuration. The tool is suited to open-access clinching where the clipping head can reach the wire joint correctly.
Before changing clip size or using the tool on a different spring or wire combination, confirm the required closed-clip geometry and the dimensions of the materials being joined.
KYA publishes the Eclipser 2800-1121 for a range of production environments using compatible coil-fed clinch clips. Suitability for an application depends on clip selection, wire dimensions, access around the joint and required closed-clip geometry.
Mattress border wire assembly
Bedding and spring assembly
Upholstered furniture spring attachment
Sofa base production
Selected wire cage and trap assembly
Selected frame and panel assembly
Automotive seat spring attachment where the clip and joint configuration match
If replacing an existing unit, provide the complete tool reference such as EA2800-1121 together with photos of the identification plate where available.
Identify the current clip as 88A23R, 91A23R, 96A23R, CCP-14S, CCP-14 or CCP-9. Do not select a replacement clip based only on approximate width or shape.
Provide the diameter and arrangement of the wires or components being clinched. For mattress production, identify the border wire and spring-wire dimensions where possible.
The tool is intended primarily for open-access fastening. Confirm that the clipping head can reach the joint correctly within the production fixture or finished assembly.
The factory compressed-air system should support the published 80–90 PSI / 5.5–6.2 bar operating range at the workstation.
| Issue | Check |
|---|---|
| Driver Blade Jam | Check clip alignment and use the published Blade Jam Release feature as instructed for the tool. |
| Repeated Jamming | Confirm the exact clip model, coil feed alignment and driver condition. |
| Weak or Incomplete Clinch | Check that operating pressure remains within 80–90 PSI and inspect the driver and clip setup. |
| Worn Driver Blade | Use the quick-release front plate to access the driver area according to the tool service procedure. |
| Clip Feed Problem | Check coil orientation, feed alignment and whether the selected clip is approved for the tool configuration. |
Existing tool model: EA2800-1121 or other reference
Required replacement or current tool reference
Existing clip model
Hartco clip reference, if applicable
Wire or material dimensions being clinched
Application, such as mattress border wire or furniture spring assembly
Required tool quantity
Required clips or maintenance parts, if applicable
Factory air pressure
Delivery destination
Send Your Clinch Tool Requirements
It is a coil-fed pneumatic clinch clip closure tool used with continuous clip coils for applications including mattress border wire assembly.
The KYA page identifies the green Encore tool as EA2800-1121.
Encore currently identifies the Eclipser 2800-3321 as the replacement for the 2800-1121. Provide your existing tool and clip references when requesting a replacement.
Published clip references are Encore 88A23R, 91A23R and 96A23R, corresponding to Hartco references CCP-14S, CCP-14 and CCP-9.
The published capacity is approximately 9,375 to 10,000 clips per roll, depending on clip size.
The published operating range is 80–90 PSI / 5.5–6.2 bar.
The published net weight is 7.0 lbs / 3.2kg.
Mattress fabrication and 5mm border wire are published applications for this tool family. Confirm the selected clip and wire combination for the actual production setup.
It is an auxiliary air valve intended to assist with releasing a jammed driver blade. Repeated jams should also be investigated for clip alignment, feed or driver condition.
The tool uses a quick-release front plate designed to provide easier access to the driver area for inspection and replacement.
No. They are separate Hartco clip references corresponding to different Encore clip models. Match the exact clip reference to the production setup.
Provide the existing tool model, clip model, wire dimensions, application and photos of the tool identification plate or existing clip where available.
For mattress, bedding and compatible wire-clinching production, send the existing tool model, clip reference, wire dimensions, required quantity and delivery destination so the correct clinch clip tool and clip configuration can be confirmed.
