The KYA-supplied Eclipser 2800-1020 Clinch Clip Tool is a hand-held pneumatic clinching tool designed to feed compatible metal clips through a straight steel magazine for repetitive industrial fastening. The legacy 2800-1020 platform is used in bedding, upholstered furniture, housing panels, cages, traps and other applications where clips are clinched around wire or compatible components.
The tool measures approximately 381 × 203 × 190mm / 15 × 8 × 7.5 inches, weighs approximately 3.2kg / 7.0 lb and operates at 80–90 PSI / 5.5–6.2 bar. Key features include a quick-release front plate, auxiliary blade-jam-release system, contoured handle and reversible hanger.
Model update: Eclipser 2800-1020 is now a legacy Encore/Hartco reference. Encore currently identifies Eclipser 2800-3320 as the replacement for 2800-1020. Buyers servicing an existing 2800-1020 line should provide the current tool model, clip number and application when requesting replacement tools, clips or parts.
| Parameter | Specification |
|---|---|
| Model | Eclipser 2800-1020 |
| Tool Type | Pneumatic Clinch Clip Tool / Pneumatic Clip Gun |
| Legacy Cross Reference | Hartco HR-49CC family reference |
| Current Encore Replacement | Eclipser 2800-3320 |
| Dimensions | 15 × 8 × 7.5 in. / 381 × 203 × 190mm |
| Net Weight | 7.0 lb / approximately 3.2kg |
| Operating Air Pressure | 80–90 PSI / 5.5–6.2 bar |
| Housing | Composite housing |
| Magazine Material | Steel |
| Magazine Format | Straight Magazine |
| Clip Feed | Continuous coil clips fed into straight magazine when configured with the appropriate continuous-coil system |
| Continuous Coil Supply | Approximately 13,500–15,000 clips per roll depending on clip size |
| Clip Feeding Method | Single-acting spring-extended cylinder |
| Main Cylinder | 3.06 in. / approximately 78mm bore, spring return |
| Front Plate | Quick-release design for driver-blade access and replacement |
| Jam Release | Auxiliary Blade Jam Release air valve / BJR-type system |
| Hanger | Reversible right-hand / left-hand hanger |
| Primary Applications | Bedding, upholstery, furniture spring assembly, housing panels, cages and traps |
Request 2800-1020 Tool Information 
Legacy Encore/Hartco cross-reference data lists the Eclipser 2800-1020 for a group of narrow A-width continuous-coil clips. When replacing clips, use the exact clip number rather than choosing only by visual shape or wire diameter.
| Encore E-Clip Reference | Hartco Cross Reference | Compatibility Note |
|---|---|---|
| 64A18R | CCP-15 | Listed in legacy 2800-1020 compatibility data; confirm current tool setup and anvil before replacement use |
| 71A18R | CCP-13 | Listed in legacy 2800-1020 compatibility data |
| 73A18R | CCP-19 | Compatible with the legacy 2800-1020 and also listed for the 2800-3320 replacement |
| 76A18R | CCP-26 | Compatible with the legacy 2800-1020 and also listed for the 2800-3320 replacement |
| 85A18R | CCP-30 | Compatible with the legacy 2800-1020 and also listed for the 2800-3320 replacement |
Replacement-model note: the Eclipser 2800-3320 is currently specified for 73A18R / CCP-19, 76A18R / CCP-26 and 85A18R / CCP-30. Do not assume that every clip historically listed for the 2800-1020 is automatically approved for every 2800-3320 configuration without confirming the tool setup.
| Feature | Eclipser 2800-1020 | Eclipser 2800-3320 |
|---|---|---|
| Model Status | Legacy model / installed-base reference | Encore replacement for 2800-1020 |
| Tool Type | Pneumatic continuous-coil clinch clip tool | Pneumatic continuous-coil clinch clip closure tool |
| Dimensions | 15 × 8 × 7.5 in. / 381 × 203 × 190mm | 15 × 8 × 7.5 in. / 381 × 203 × 190mm |
| Weight | Approximately 7.0 lb / 3.2kg | Approximately 7.0 lb / 3.2kg |
| Air Pressure | 80–90 PSI / 5.5–6.2 bar | 80–90 PSI / 5.5–6.2 bar |
| Front Plate | Quick-release front plate | Quick-release front plate |
| Jam Release | Auxiliary blade-jam-release system | Blade Jam Release air valve |
| Anvil | Confirm installed legacy configuration | Encore 2800-3320 features a double-ended anvil |
| Clip References | Legacy documentation lists 64A18R, 71A18R, 73A18R, 76A18R and 85A18R | Encore currently lists 73A18R, 76A18R and 85A18R |
If you currently operate a 2800-1020 production line, provide the installed clip number, anvil configuration and application before changing to 2800-3320. A replacement-model designation does not mean every historical clip setup should be changed without verification.
The Eclipser 2800 platform is designed around continuous coil clips. Clips are supplied from a large coil into the tool's straight magazine, reducing the frequency of manual reloading in repetitive production compared with short-strip clip systems.
The continuous-coil system supplies approximately 13,500–15,000 clips per roll, depending on clip size. These clips are fed from the external coil supply into the straight magazine; the hand-held tool itself does not physically store 15,000 clips.
When requesting a complete production setup, confirm whether the quotation includes only the hand tool or also the required coil stand, balancer, regulator, hoses, track and other continuous-feed components.
The quick-release front plate provides access to the driver area and allows driver-blade replacement without conventional tool disassembly. This feature is useful in repetitive factory environments where reducing maintenance downtime is important.
The auxiliary Blade Jam Release system uses compressed air to assist with a jammed driver blade. If a jam repeats, the operator should also inspect the clip specification, feed path, driver blade, anvil and air-supply condition instead of relying only on the release valve.
The hanger can be positioned for right- or left-hand operation and can support suspended-tool production layouts where the tool is used with a balancer.
At approximately 3.2kg / 7.0 lb, the tool is designed for hand-held industrial clinching. For repetitive production, actual operator ergonomics also depend on working height, tool orientation, balancer setup and cycle frequency.
The Eclipser 2800 platform is used in bedding production where compatible clips join wire and spring components. Select the exact E-Clip or Hartco cross-reference according to the wire dimensions and required finished clinch.
The 2800-3320 replacement is specifically positioned for fastening silent wire to sinuous spring wire in upholstered furniture. Existing 2800-1020 users should identify the clip currently used before selecting replacement tooling.
Clinch clips can mechanically connect compatible wire and spring components in sofas, chairs and other upholstered furniture structures. Tool, clip and anvil geometry must match the exact joint.
Legacy 2800-1020 compatibility charts include housing construction panels among its applications. Confirm the panel reinforcement, wire dimensions and clip specification before setting up the clinching process.
The legacy 2800-1020 tool is also associated with cages and traps where compatible clips join intersecting wires. The correct clip size should be selected from the wire diameters and required closed-clip geometry.
Selected clinch-clip systems can be used for fencing and other wire assemblies. Do not select a clip only by nominal tool family; verify wire combination, open clip dimensions and finished clinch.
| Selection Parameter | Why It Matters |
|---|---|
| Exact Tool Model | 2800-1020 and 2800-3320 are related models, but approved clip lists are not identical. |
| Existing Clip Number | Encore or Hartco reference numbers provide the most reliable starting point for replacement. |
| Wire Diameter | The open clip must fit around the wire combination before clinching. |
| Open Clip Width and Height | Clip dimensions affect magazine feed, anvil fit and finished joint geometry. |
| Clip Wire Gauge | The clip material cross-section must match the tool and required fastening strength. |
| Anvil Configuration | The anvil controls how the clip is formed around the wire assembly. |
| Final Clinch Dimension | The closed clip must secure the joint without excessive looseness or damage to the wire components. |
The Eclipser 2000 and 2800 families should not be treated as the same feed system. The 2800 platform is associated with straight-magazine continuous-coil feeding for long production runs, while many 2000-series tools use manually loaded collated clip strips or other model-specific magazine configurations.
| Feature | 2800-1020 | Typical 2000-Series Tool |
|---|---|---|
| Primary Feed Concept | Continuous coil feeding into straight magazine | Model-specific strip or magazine feeding |
| Production Focus | High-volume repetitive clinching with continuous coil supply | General manual clinching depending on model |
| Weight | Approximately 3.2kg | Varies by individual model |
| Clip Compatibility | Specific A-width continuous-coil clip family for 2800-1020 | Depends on the exact 2000-series model and magazine |
The specified operating range is 80–90 PSI / 5.5–6.2 bar. Stable, clean compressed air is important for repeatable tool cycling and clinch formation.
Before installing the tool on a production line, confirm air pressure, hose size, regulator, lubrication requirements, production orientation, balancer arrangement and continuous-coil feed path. Air consumption per cycle is not specified in the available product data, so compressor sizing should be based on verified tool requirements rather than an assumed value.
| Symptom | Items to Check |
|---|---|
| Clip Does Not Feed | Clip number, coil direction, magazine path, clip dimensions and feed-cylinder condition |
| Driver Blade Jams | Correct clip, damaged clip coil, driver wear, guide contamination and air pressure |
| Clip Does Not Fully Close | Anvil configuration, wire diameter, clip size, air pressure and driver condition |
| Clip Is Too Tight | Clip selection, anvil geometry and workpiece wire dimensions |
| Inconsistent Clinching | Air supply stability, clip quality, driver/anvil wear and operator positioning |
| Information | What to Provide |
|---|---|
| Existing Tool | Eclipser 2800-1020, HR-49CC or other exact model reference |
| Required Replacement | Legacy service requirement or current 2800-3320 replacement |
| Current Clip | Provide Encore E-Clip or Hartco CCP reference number |
| Application | Mattress, sinuous spring, upholstery, panel, cage, trap, fencing or other wire-clinching application |
| Wire Combination | Provide wire diameters and joint arrangement |
| Production Setup | Hand-held use or continuous-coil production line with stand and balancer |
| Spare Parts | Specify driver blade, anvil, jam-release components or other required replacement parts |
| Quantity | Tool quantity, clip requirement and expected production volume |
Send Your Clinch Tool Requirements
The Eclipser 2800-1020 is a pneumatic clinch clip tool designed for continuous-coil clip feeding into a straight magazine. It is used for industrial applications such as bedding, upholstery, panels, cages and traps.
It is now a legacy model reference. Encore currently identifies Eclipser 2800-3320 as the replacement for 2800-1020.
The Encore replacement is Eclipser 2800-3320. Existing users should confirm the installed clip, anvil and application before changing tools.
Legacy cross-reference documentation associates the 2800-1020 family with the Hartco HR-49CC continuous-coil clinching system.
Legacy documentation lists Encore 64A18R, 71A18R, 73A18R, 76A18R and 85A18R, corresponding to Hartco CCP-15, CCP-13, CCP-19, CCP-26 and CCP-30. Verify the installed tool and anvil before ordering replacement clips.
Do not assume the complete legacy list applies unchanged. Encore currently specifies 73A18R / CCP-19, 76A18R / CCP-26 and 85A18R / CCP-30 for the 2800-3320.
The published operating range is 80–90 PSI / approximately 5.5–6.2 bar.
The specified tool weight is approximately 7.0 lb / 3.2kg.
The listed dimensions are approximately 15 × 8 × 7.5 inches / 381 × 203 × 190mm.
The 13,500–15,000 figure refers to the approximate number of clips in a continuous coil roll depending on clip size. Clips are fed from that continuous supply into the tool's straight magazine; the number should not be interpreted as 15,000 clips stored inside the hand-held magazine itself.
Confirm the quotation before ordering. Encore lists the continuous-coil clipping system and related production equipment separately from the hand tool.
It provides rapid access to the driver area and supports driver-blade replacement without conventional tool disassembly, helping reduce maintenance time.
The auxiliary air-valve system assists with releasing a jammed driver blade. Repeated jams should also prompt inspection of the clip size, feed path, driver, anvil and air supply.
Yes. The 2800 platform is associated with bedding and mattress manufacturing, including compatible wire and spring clinching applications. Select the exact clip and anvil according to the wire combination.
The 2800-3320 replacement is specifically positioned for fastening silent wire to sinuous spring wire in upholstered furniture. Existing 2800-1020 setups should be checked for the installed clip and anvil configuration.
Legacy 2800-1020 application data includes cages and traps. Provide the wire diameters and required clip reference when qualifying a tool for a new cage or trap assembly.
Clip selection depends on the tool configuration, wire diameters, open clip dimensions and required finished clinch. If replacing an existing production clip, provide the current Encore or Hartco number whenever possible.
Contact KYA Fasteners with the exact tool model and current clip number to confirm current spare-parts availability and the correct driver or anvil configuration.
Contact KYA Fasteners to confirm current demonstration or evaluation availability. For a new production application, provide wire samples, clip requirements and expected cycle conditions so the tool and clip combination can be checked.
KYA supplies clinch clip tools and compatible fastening products for mattress factories, bedding manufacturers, upholstered furniture producers, wire-product manufacturers, cage and trap factories and industrial fastening distributors.
For an existing Eclipser 2800-1020 line, provide the current tool identification, Encore or Hartco clip number, wire dimensions, application and required spare parts. For new installations, specify production volume and whether a continuous-coil feeding system is required.
