| Finish: | |
|---|---|
| Quantity: | |
KYA F32 18 gauge galvanized brad nails are 32 mm straight-strip finish fasteners for compatible 18GA brad nailers. The approximately 1.25 × 1.00 mm wire profile, 2.00 mm head width and 32 mm / 1-1/4 inch length make F32 suitable for trim, casing, molding, paneling, cabinetry, furniture and other professional woodworking applications.
The 1-1/4-inch size provides greater penetration than short 15–25 mm brads while remaining shorter than 40–50 mm options. This makes F32 a practical mid-length 18GA fastener for many interior finish and production woodworking operations.
The standard version uses an electro-galvanized finish for general indoor and protected applications. A stainless-steel option is also available within the product range for applications requiring additional corrosion resistance; confirm the required stainless grade before ordering.
32 mm / 1-1/4" length: mid-length 18GA brad for trim, cabinetry and general finish work.
18 gauge profile: approximately 1.25 mm wide × 1.00 mm thick.
2.00 mm head width: compact finish head for a relatively small visible fastening point.
Chisel point: designed for controlled penetration into suitable wood, plywood, MDF and trim materials.
Straight strip collation: for compatible straight-magazine 18GA brad nailers.
Electro-galvanized finish: basic corrosion protection for general indoor and protected environments.
100 nails per stick: suitable for many professional 18GA brad nailer magazines.
5,000 nails per box: convenient bulk packing for distributors and production users.
| Parameter | Specification |
|---|---|
| Model | F32 |
| Product Code | KYA-F32 |
| Fastener Type | Straight Collated Brad Nail |
| Gauge | 18 Gauge |
| Length | 32 mm / approximately 1-1/4" |
| Head Width | Approximately 2.00 mm |
| Wire Width | Approximately 1.25 mm |
| Wire Thickness | Approximately 1.00 mm |
| Point | Chisel Point |
| Collation | Straight Strip |
| Standard Finish | Electro-Galvanized |
| Alternative Material | Stainless steel option available according to specification |
| Nails per Stick | 100 pcs |
| Nails per Box | 5,000 pcs |
| Boxes per Carton | 10 boxes |
| Cartons per Pallet | 60 cartons |
| Gross Weight per Carton | Approximately 14.3 kg |
F32 occupies a useful middle position in the 18GA brad range. At 32 mm, it provides more penetration than short brads used for thin decorative components while remaining easier to control than longer 40–50 mm brads in relatively thin trim assemblies.
The correct length still depends on the thickness of the workpiece, substrate, required penetration and the fastening requirements of the installed material.
Door and window casing
Decorative molding
Chair rail
Wainscoting
Paneling and beadboard
Cabinet face frames and cabinet trim
Furniture components
Picture and mirror frames
Plywood and MDF assemblies where an 18GA brad is appropriate
General finish carpentry and woodworking
A 32 mm 18GA brad can be used for suitable casing, molding, chair rail and wainscoting where the trim thickness and substrate allow sufficient penetration.
For thicker or heavier trim, the connection may require a longer brad or a heavier 16GA or 15GA finish nail. Fastener length and gauge should be selected from the actual assembly rather than from the trim name alone.
F32 can be used in compatible cabinet and furniture production for face frames, decorative components, panel attachment, trim and other non-structural woodworking joints.
Material thickness should be checked before using a 32 mm brad for drawer fronts, cabinet panels or thin backing materials so the fastener does not penetrate through the opposite surface.
The small 18GA profile makes F32 suitable for selected MDF and plywood assemblies. Performance depends on panel density, thickness, edge distance, drive depth and whether adhesive is also used in the joint.
When fastening close to panel edges, test the nail placement and air pressure or depth setting on the actual workpiece before production.
The standard F32 uses an electro-galvanized zinc finish. This coating provides basic corrosion protection compared with untreated steel and is commonly used for interior trim, cabinetry, furniture and other protected woodworking applications.
Electro-galvanized brads should not automatically be specified for permanently wet, salt-air, marine or other highly corrosive environments. Select a suitable stainless-steel fastener where the application requires greater corrosion resistance.
| Material / Finish | Typical Selection |
|---|---|
| Electro-Galvanized Steel | Indoor casing, molding, cabinetry, furniture, paneling and protected woodworking. |
| Stainless Steel | Applications requiring additional corrosion resistance. Confirm the exact stainless grade and F32 configuration before ordering. |
The 32 mm / 1-1/4-inch F32 falls within the fastener-length range of many professional 18GA brad nailers. Compatibility should still be checked from the exact tool model, straight-strip geometry and head profile.
| Tool Platform | Published Fastener Range | F32 Guidance |
|---|---|---|
| DEWALT DCN680 | 18GA brads, approximately 5/8"–2-1/8" | 32 mm / 1-1/4" is within the published length range; verify complete fastener profile. |
| DEWALT DWFP12233 | 18GA brads, approximately 5/8"–2-1/8" | F32 falls within the stated length range; confirm strip and head geometry. |
| Metabo HPT NT1850DGQ4 | 18GA brads, approximately 5/8"–2" | F32 falls within the published fastener range. |
| Metabo HPT NT50A5 | 18GA brads, approximately 5/8"–2" | 32 mm is within the tool's published length range. |
| SENCO F-18XP | 18GA AX / AY style, approximately 5/8"–2-1/8" | F32 is the same nominal length as SENCO AX15EAA; confirm head and strip profile before substitution. |
| BOSTITCH BT1855-E / SB-2IN1-E | BOSTITCH lists a dedicated 32 mm 18GA BT13-series brad. | The published 32 mm BOSTITCH brad uses approximately 1.25 mm wire and a 2 mm head, closely matching the F32 size class. |
The 1-1/4-inch 18GA brad is a widely established finish-fastener size. The following references can help buyers identify the required dimensional class when comparing suppliers.
| Reference | Size | Published Characteristics |
|---|---|---|
| KYA F32 | 32 mm / 1-1/4" | 18GA, approximately 1.25 × 1.00 mm, 2.00 mm head, galvanized. |
| BOSTITCH BT1332B Class | 32 mm | 18GA, approximately 1.25 mm wire, 2 mm head. |
| SENCO AX15EAA | 1-1/4" | 18GA, chisel point, galvanized, medium head, straight strip, 5,000/box. |
| Grip-Rite GRF18114 | 1-1/4" | 18GA electro-galvanized brad, available in 5,000-count packaging. |
A matching gauge and nominal length are useful references, but they do not automatically guarantee interchangeability. Compare the actual head, wire cross section, collation and nailer specification before changing brands.
An exact 1-1/4 inch measurement equals 31.75 mm. F32 is manufactured to the nominal 32 mm metric length and is therefore commonly described as a 1-1/4-inch brad.
For purchasing and production control, use the specific F32 model and 32 mm length when exact metric dimensions are required.
| Packing Level | F32 Quantity |
|---|---|
| Nails per Stick | 100 pcs |
| Nails per Box | 5,000 pcs |
| Boxes per Carton | 10 boxes |
| Cartons per Pallet | 60 cartons |
| Gross Weight per Carton | Approximately 14.3 kg |
| Item | Length | Pcs / Stick | Pcs / Box | Boxes / Carton | Cartons / Pallet | G.W. / Carton |
|---|---|---|---|---|---|---|
| F32 | 32 mm / 1-1/4" | 100 | 5,000 | 10 | 60 | 14.3 kg |
| F15 | 15 mm / nominal 5/8" | 100 | 5,000 | 30 | 50 | 20.05 kg |
| F40 | 40 mm / 1-9/16" | 100 | 5,000 | 10 | 60 | 17.8 kg |
| F50 | 50 mm / 2" | 100 | 5,000 | 10 | 50 | 21.8 kg |
| Length Range | General Selection Consideration |
|---|---|
| 15–25 mm | Thin trim, decorative parts, picture frames and shallow fastening applications. |
| F32 – 32 mm | General casing, molding, paneling, cabinet and furniture applications. |
| 35–40 mm | Applications requiring additional penetration while retaining an 18GA fastener profile. |
| 45–50 mm | Longer finish applications where the workpiece, substrate and nailer permit deeper penetration. |
| Fastener Type | General Characteristic | Typical Selection |
|---|---|---|
| 18GA Brad Nail | Smaller wire profile and compact head. | Trim, molding, cabinetry, furniture and paneling. |
| 16GA Finish Nail | Heavier cross section than 18GA. | Heavier casing, baseboard and finish work requiring more fastening capacity. |
| 15GA Finish Nail | Larger finish-nail platform. | Thicker trim and more demanding finish connections. |
| Selection Factor | What to Check |
|---|---|
| Workpiece Thickness | Make sure 32 mm does not penetrate through thin material. |
| Substrate | Consider solid wood, plywood, MDF or engineered board density. |
| Required Penetration | Choose sufficient penetration for the joint without excessive breakthrough. |
| Nailer | Confirm that the tool accepts 32 mm / 1-1/4" 18GA straight brads. |
| Environment | Choose galvanized or a more corrosion-resistant material according to exposure. |
| Fastening Capacity | Use a heavier finish nail where the joint requires more capacity than an 18GA brad provides. |
| Order Information | What to Provide |
|---|---|
| Fastener Model | F32 / KYA-F32. |
| Length | 32 mm / approximately 1-1/4". |
| Gauge | 18GA. |
| Nailer Brand and Model | Provide the exact tool model for compatibility checking. |
| Finish / Material | Specify electro-galvanized or required stainless-steel configuration. |
| Application | Specify casing, molding, paneling, cabinetry, furniture or other use. |
| Quantity | Provide boxes, cartons, pallets or estimated annual demand. |
Discuss Your F32 Brad Nail Requirement
KYA F32 is a 32 mm / approximately 1-1/4-inch 18 gauge straight brad nail.
The current KYA specification lists an approximately 1.25 mm width × 1.00 mm thickness with an approximately 2.00 mm head width.
F32 is an 18GA brad nail, which is a type of small finish fastener. It is commonly used for trim and finish woodworking, but it is smaller than typical 15GA or 16GA finish nails.
The current packing specification lists 100 nails per stick.
F32 is currently packed 5,000 nails per box.
The current F32 packing table lists 10 boxes per carton.
The current F32 specification lists 60 cartons per pallet.
The published gross weight is approximately 14.3 kg per carton. Confirm current packing details with the quotation before shipment.
The standard product shown on this page uses an electro-galvanized finish.
F32 can be used for suitable baseboard or shoe-molding applications where a 32 mm 18GA brad provides adequate penetration. Thicker baseboards or applications requiring greater holding capacity may require a longer or heavier finish nail.
Yes, for casing assemblies where the material thickness and substrate are appropriate for a 32 mm 18GA brad.
Yes. Paneling, beadboard and wainscoting are common applications for 18GA brads when the selected length matches the panel and substrate thickness.
F32 can be used for suitable hardwood trim, but actual performance depends on wood species, density, edge distance, nail placement and nailer drive setting. Test the fastener on the actual material before production use.
The DEWALT DCN680 accepts 18GA brads from approximately 5/8" to 2-1/8", so 32 mm / 1-1/4" is within its published length range. Confirm the complete brad profile before changing suppliers.
The DWFP12233 accepts 18GA brads from approximately 5/8" to 2-1/8", placing F32 within its stated length range. Verify the strip and head profile before production use.
Several current Metabo HPT 18GA nailers accept straight brads from approximately 5/8" to 2", so F32 falls within their published length range. Confirm the exact tool model before use.
The SENCO F-18XP accepts 18GA AX and AY style brads from approximately 5/8" to 2-1/8". SENCO AX15EAA is a 1-1/4-inch galvanized straight-strip 18GA brad, placing F32 in the same nominal length class. Confirm head and strip geometry before substitution.
Yes. Both belong to the 32 mm 18GA brad size class. BOSTITCH publishes approximately 1.25 mm wire diameter and a 2 mm head for its 32 mm BT13-series brad. Confirm complete fastener geometry before cross-brand use.
Both are 1-1/4-inch-class 18GA galvanized straight-strip brads with a chisel point. Use the exact head and strip dimensions and the nailer's fastener specification to confirm interchangeability.
Grip-Rite also offers 1-1/4-inch 18GA electro-galvanized brads in 5,000-count packaging. Compare the complete fastener profile and nailer specification before cross-brand use.
The small 18GA profile can reduce splitting compared with heavier fasteners, but splitting cannot be ruled out. Wood species, density, moisture content, grain direction, edge distance and drive depth all affect the result.
No fastener can guarantee jam-free operation under every tool and operating condition. Correct fastener dimensions, strip collation, magazine condition, driver condition, loading and tool maintenance all affect feeding.
KYA currently lists stainless steel as an available finish or material option for this product. Confirm the required stainless grade, 32 mm specification and current availability when requesting a quotation.
The standard electro-galvanized F32 is primarily intended for indoor or protected applications. For demanding exterior, wet, salt-air or corrosive environments, select an appropriate corrosion-resistant fastener material.
F32 is an 18GA finish brad intended for appropriate trim and woodworking applications. It should not replace structural nails, screws or approved connectors where structural fastening is required.
Yes. Check magazine feeding, drive depth, head position, surface appearance and holding performance in the actual nailer and workpiece before volume production.
Provide the required quantity, nailer brand and model, application, galvanized or stainless requirement, packaging requirement and destination market.
KYA supplies F32 32 mm / 1-1/4-inch 18 gauge galvanized brad nails for fastener distributors, cabinet and furniture manufacturers, woodworking suppliers, trim contractors and other professional users. Send your nailer model, required quantity, application and material requirement to confirm the appropriate configuration.
The current product information lists an MOQ of 50 cartons (one pallet), an estimated lead time of 15–20 days, and a free 1,000-piece F32 sample pack; the buyer pays freight. Confirm the current production schedule, sample availability and shipping terms when requesting a quotation.
