KYA Fasteners supplies pneumatic coil nailers for roofing contractors, siding installers, pallet manufacturers, wood packaging factories, tool distributors and industrial fastening operations. The range includes compact roofing nailers, general construction and siding nailers, and higher-capacity models for framing, crating and pallet production.
Different coil nailers require different nail lengths, shank diameters, head sizes and collation formats. Choose a tool by its intended application and published fastener specifications rather than assuming that all coil nails fit every model.
| Tool Category | Typical Work | KYA Examples | Selection Focus |
|---|---|---|---|
| Roofing coil nailers | Asphalt shingles and specified roof-covering installations | CRN45, CRN45A | Roofing nail head and shank dimensions, length, 15° wire collation |
| Siding and general construction coil nailers | Siding, sheathing, fencing and panel fastening | CN45, CN55, CN70 | Suitable nail size, wire or plastic collation where applicable, substrate |
| Framing and wood packaging coil nailers | Framing, crates, pallets, wooden boxes and drums | CN80, CN90B, CN130 | Longer fasteners, tool operating pressure, coil capacity |
| Pallet production coil nailers | Euro pallets and industrial timber packaging | CN100EPAL | E-PAL nail configuration and production-line requirements |
The following figures are specific to the listed tool models. Magazine capacity can vary with nail size and coil configuration. Check the individual product page for complete fastener dimensions and operating instructions.
| Model | Main Application | Nail Length | Collation | Capacity | Operating Pressure |
|---|---|---|---|---|---|
| CRN45 | Roofing | 19–45 mm | 15° wire roofing coil | 120 nails | 70–120 PSI |
| CRN45A | Roofing | 19–45 mm | 15° wire roofing coil | 120 nails | 70–120 PSI |
| CN45 | Construction and paneling | 25–50 mm | Compatible wire / plastic coil formats | Up to 400 wire / 200 plastic | 70–120 PSI |
| CN55 | Siding and fencing | 32–57 mm | 15° flat wire coil | 250–400 nails | 70–120 PSI |
| CN70 | Construction, crates and pallets | 45–70 mm | 15° flat wire coil | 225–300 nails | 70–120 PSI |
| CN80 | Framing and pallet assembly | 50–83 mm | 15° flat wire coil | 225–300 nails | 70–120 PSI |
| CN90B | Heavy framing and pallet work | 50–90 mm | 15° flat wire coil | 200–300 nails | 70–120 PSI |
| CN100EPAL | Euro pallet production | 70–90 mm | 15° wire E-PAL coil | 150–300 nails | 70–120 PSI |
| CN130 | Heavy timber, crates and pallets | Approx. 89–130 mm | 15° wire coil | 120–225 nails | 115–145 PSI |
Ask for Model Specifications and Pricing
KYA CRN45 and CRN45A are roofing coil nailers for driving 15° wire-collated roofing nails. Their published 19–45 mm nail range and 120-nail magazine capacity suit roofing tasks such as asphalt shingle installation when the selected nails meet the roofing material requirements. Both models are listed for operation at 70–120 PSI.
Roofing nailers are not automatically interchangeable with siding or framing nailers. Roofing fasteners use application-specific head and shank dimensions, and the nailer must accept the correct coil format. Select nail length and coating according to the roof covering manufacturer's installation instructions and applicable job requirements.
The CN45, CN55 and CN70 series serve applications including siding, fencing, paneling, sheathing, wooden boxes and other wood-fastening tasks. Nail length coverage and magazine capacity increase across the range, but compatibility is determined by the exact model specification rather than the model name alone.
CN45: 25–50 mm nails, with compatible wire and plastic-sheet coil options as specified for the tool.
CN55: 32–57 mm, 15° flat wire coil nails for siding, fencing and other construction uses.
CN70: 45–70 mm, 15° flat wire coil nails for larger wood assemblies, crating and related work.
For finished siding or softer work surfaces, check whether the specific model offers depth adjustment and contact protection features. Select the nail shank and coating for the material, exposure conditions and project requirements.
For framing, pallet assembly, crating and high-volume timber fastening, KYA offers models such as CN80, CN90B, CN100EPAL and CN130. These tools have different fastener capacities and driving ranges. CN100EPAL is intended for relevant E-PAL nail configurations, while CN130 covers a longer nail range and requires a higher operating pressure than most of the smaller models listed above.
For pallet production lines or equipment-integrated applications, provide the machine arrangement, nail specification and expected operating conditions when requesting a suitable pneumatic nailer.
KYA also supplies coil nails for compatible pneumatic tools. Available product families include wire-collated nails and plastic-sheet-collated nails. Options may include smooth, ring and screw shanks, together with different surface finishes. The availability of a nail specification within the broader fastener range does not mean it will fit every coil nailer.
The wider KYA coil nail range includes multiple diameters, lengths, shank styles and finishes for wood fastening. For an individual nailer, confirm coil angle, collation material, nail length, shank diameter, head diameter and coil capacity against the tool specification.
For CRN45 and CRN45A, the published tool specification identifies 15° wire-collated roofing nails with 19–45 mm lengths and a 3.05 mm shank diameter. Other roofing nail configurations must be checked against their intended tool and roofing application.
| Check | What to Confirm Before Buying |
|---|---|
| Tool model | Exact manufacturer model and product specifications |
| Collation | Wire or plastic-sheet format and permitted coil angle |
| Nail dimensions | Length, shank diameter, head diameter and coil dimensions |
| Application | Roofing, siding, framing, pallets or crates, including substrate and exposure |
| Operating setup | Regulated air pressure, compressor airflow, hose and fitting requirements |
Use clean, dry and appropriately regulated compressed air, and remain within the pressure range specified for the particular model. Before clearing a jam, changing nails or inspecting moving parts, disconnect the air supply and follow the tool instructions. Routine inspection of the magazine, feed mechanism, driver and seals can help identify wear or incompatible fasteners.
For distributor or industrial purchasing inquiries, provide the model number, destination market, estimated order quantity and the required nail specification. For matched tool-and-fastener sourcing, include the nail length, shank diameter, head diameter, collation type and preferred packing details. KYA can review the requested combination and provide a quotation based on the confirmed configuration.
Contact KYA for Coil Nailers and Nails
A pneumatic coil nailer drives collated nails from a coil magazine using compressed air. Depending on the model, it can be used for roofing, siding, fencing, framing, sheathing, crates or pallet production.
Roofing nailers are designed around roofing nail head and shank requirements and typically a shorter roofing nail range. Siding nailers are selected for the dimensions and materials required by siding and other wood-fastening applications. The two types should not be treated as interchangeable.
No. Collation compatibility is model-specific. The CN45 lists compatible wire and plastic-sheet options, while several other models shown on this page specify 15° wire-collated coils. Confirm the exact tool specification before purchasing nails.
The published models shown in the comparison table cover different nail ranges, including 19–45 mm for CRN45A, 32–57 mm for CN55, 50–83 mm for CN80 and approximately 89–130 mm for CN130. Always use the approved range for the chosen tool.
Pressure depends on the model. Many KYA coil nailers in this range are listed at 70–120 PSI, whereas CN130 is listed at 115–145 PSI. Check the operating instructions and verify that the air supply meets both pressure and airflow requirements.
Capacity varies by model and fastener configuration. CRN45A is listed at 120 nails, CN70 at 225–300 nails, and CN55 at 250–400 nails. Use the individual model specification when planning production throughput.
Models such as CN80, CN90B, CN100EPAL and CN130 address different pallet, crating and timber-packaging requirements. Selection depends on the required nail size, pallet specification, tool pressure and production process.
These shank styles are available for relevant coil nail applications, but each nail must also match the tool's diameter, length, head and collation requirements. Select the shank style for the holding strength and application specified for the job.
Provide the nailer model or intended application, preferred nail dimensions, collation format, estimated order quantity, destination market and any relevant packaging or equipment requirements.
KYA Fasteners supplies coil nailer tools and related collated nails for professional users and trade buyers. Contact the team with your project application, technical requirements and purchasing volume to discuss the suitable model and compatible fasteners.
