11GA C45 1-1/2 Crown Aluminum Hog Rings
Product Description
11GA C45 1-1/2 Crown Aluminum Hog Rings ● 11 Gauge 1-1/2'' crown c ring staples. ● Made of Aliminum. ● Excellent corrosion resistance. ● Light weight. ● Sharp points offer good piercing capabilities and consistent ring closure. ● Durable and strong. ● Used for closing burlap or other woven materials through which the ring ends must penetrate in order to clinch the ring and secure the material |
| Item: | 11GA C45 1-1/2 Crown Aluminum Hog Rings |
| Gauge: | 11 Gauge |
| Fastener Type: | Hog rings |
| Material: | Aluminum |
| Surface Finishing: | Aluminum |
| Point: | Sharp,Blunt |
| Outside Diameter: | 1-1/2 inch |
| Thickness: | 3.0mm |
| Height | 22.0mm |
| Packing: | 1600 pcs/ctn |
| Fitting Tools: | C-50, PFC50 |
| Hog Ring Specification | ||||||
| Style | Crown | Closed I.D. | Wire Gauge | Points | PCs per Box | Boxes per skid |
| C | 1/2" | 1/8" | 16 (1.60mm) | Blunt or Sharp | 10,000 | 100 boxes |
| 11/16" | 9/32" | 16 (1.60mm) | Blunt or Sharp | 2,500 | 750 boxes | |
| 3/4" | 3/16" | 16 (1.60mm) | Blunt or Sharp | 11,000 | 100 boxes | |
| 1 1/2" | 9/16" | 11 (3.0mm) | Blunt or Sharp | 1,600 | 96 boxes | |
| D | 9/16 inch | 1/4 inch | 16 (1.60mm) 15 (1.80mm) 14 (2.00mm) | Blunt or Sharp | 5,000 | 375 |
| 3/4 inch | 1/4 inch | 16 (1.60mm) 15 (1.80mm) 14 (2.00mm) | Blunt or Sharp | 10,000 | 100 | |
| 1-3/16 inch | 7/16 inch | 9 (3.66mm) | Blunt or Sharp | 2,500 | 100 | |
1. Wire fencing: chain link fence, welded wire mesh, chicken wire mesh, plastic mesh;
2. Wire cage: lobster & crab pots, rabbit cage, dog kennel, other animal cages;
3. Upholstery: automobile and domestic;
4. Gardening: bird netting, trellises;
5. Note: special specifications are customized on request.
● Good corrosion resistance.
● Good price.
● Durable & sturdy.
● Copper coating or vinyl coating available.
Bright Finish
Bright fasteners have no coating to protect the steel and are susceptible to corrosion if exposed to high humidity or water. They are not recommended for exterior use or in treated lumber, and only for interior applications where no corrosion protection is needed. Bright fasteners are often used for interior framing, trim and finish applications.
Electro Galvanized (EG)
Electro Galvanized fasteners have a very thin layer of Zinc that offers some corrosion protection. They are generally used in areas where minimal corrosion protection is needed such as bathrooms, kitchens and other areas that are susceptible to some water or humidity. Roofing nails are electro galvanized because they are generally replaced before the fastener begins to wear and are not exposed to harsh weather conditions if installed properly. Areas near the coasts where salt content in rain water is higher should consider a Hot Dip Galvanized or Stainless Steel fastener.
Stainless Steel (SS)
Stainless steel fasteners offer the best corrosion protection available. The steel may oxidize or rust over time but it will never lose its strength from corrosion. Stainless Steel fasteners can be used for exterior or interior applications and generally come in 304 or 316 stainless steel.