Hog Ring M Clip Staples M18 For Bird Chicken Mesh Cage Wire Fencing
Product Description
Hog Ring M Clip Staples M18 For Bird Chicken Mesh Cage Wire Fencing ● 14 Gauge 3/4'' crown M clip staples. ● Made of Galvanized wire. ● Corrosion happens. ● Made of high quality metal, better corrosion resistance. ● Sharp and blunt points available. ● Wire gauge: 14 & 16. ● Easy installation. |
Hog ring M clip staples
| Item: | Hog Ring M Clip Staples M18 |
| Gauge: | 14 Gauge |
| Fastener Type: | Hog Ring M Clip |
| Material: | Galvanized Wire |
| Surface Finishing: | Galvanized |
| Point: | Sharp, Blunt |
| Outside Diameter: | 3/4 inch (18mm) |
| Thickness: | 1.95mm |
| Height | 8.0mm |
Other Rings in this Series:
| Product | material | inner/crown | Quantity | ||||
| description | material | Dia | (mm) | Pcs/Strip | Pcs/Box | Boxes/Ctn | Ctns/PLT |
| M20 | Gal | ￠1.95 | 20.50 | 50 | 1000 | 20 | 45 |
| M20 | Green PVC | ￠1.95 | 20.50 | 50 | 1000 | 20 | 45 |
| M18 | Gal | ￠1.95 | 18.00 | 50 | 1000 | 20 | 45 |
| M18 | Green PVC | ￠1.95 | 18.00 | 50 | 1000 | 20 | 45 |
| M16 | Gal | ￠1.3 | 16.00 | 50 | 1250 | 40 | 45 |
| M16 | Green PVC | ￠1.3 | 16.00 | 50 | 1250 | 40 | 45 |
Hog Rings:
| Stainless Steel Hog Ring Specification | ||||||
| Style | Crown | Closed I.D. | Wire Gauge | Points | PCs per Box | Boxes per skid |
| C | 1/2" | 1/8" | 16 (1.60mm) | Blunt or Sharp | 10,000 | 100 boxes |
| 11/16" | 9/32" | 16 (1.60mm) | Blunt or Sharp | 2,500 | 750 boxes | |
| 3/4" | 3/16" | 16 (1.60mm) | Blunt or Sharp | 11,000 | 100 boxes | |
| 1 1/2" | 9/16" | 11 (3.0mm) | Blunt or Sharp | 1,600 | 96 boxes | |
| D | 9/16 inch | 1/4 inch | 16 (1.60mm) 15 (1.80mm) 14 (2.00mm) | Blunt or Sharp | 5,000 | 375 |
| 3/4 inch | 1/4 inch | 16 (1.60mm) 15 (1.80mm) 14 (2.00mm) | Blunt or Sharp | 10,000 | 100 | |
| 1-3/16 inch | 7/16 inch | 9 (3.66mm) | Blunt or Sharp | 2,500 | 100 | |
They are used as connection for car seat assembling, chain link fence, weld fence panels, chicken wire fence, trellis and bird netting.
Bright Finish
Bright fasteners have no coating to protect the steel and are susceptible to corrosion if exposed to high humidity or water. They are not recommended for exterior use or in treated lumber, and only for interior applications where no corrosion protection is needed. Bright fasteners are often used for interior framing, trim and finish applications.
Electro Galvanized (EG)
Electro Galvanized fasteners have a very thin layer of Zinc that offers some corrosion protection. They are generally used in areas where minimal corrosion protection is needed such as bathrooms, kitchens and other areas that are susceptible to some water or humidity. Roofing nails are electro galvanized because they are generally replaced before the fastener begins to wear and are not exposed to harsh weather conditions if installed properly. Areas near the coasts where salt content in rain water is higher should consider a Hot Dip Galvanized or Stainless Steel fastener.
Stainless Steel (SS)
Stainless steel fasteners offer the best corrosion protection available. The steel may oxidize or rust over time but it will never lose its strength from corrosion. Stainless Steel fasteners can be used for exterior or interior applications and generally come in 304 or 316 stainless steel.