KYA 15 Degree Coil Siding Nails in 2 inch × .092 inch feature a ring shank, full round head, diamond point and wire-welded coil collation for compatible pneumatic siding and coil nailers.
The featured product uses a 2.34mm / .092 inch shank diameter, 50.8mm / 2 inch length and approximately 5.6mm / .220 inch head diameter. The current KYA specification lists Q195 / Q235 carbon steel and a bright, uncoated finish.
Because this specific SKU has a bright finish, it is intended primarily for dry interior applications and untreated wood. For exterior siding, fiber cement, treated lumber, fencing or other weather-exposed applications, select an appropriate hot-dip galvanized or stainless steel version according to the siding manufacturer and project specification.
| Specification | Details |
|---|---|
| Product Type | Wire-Collated Coil Siding Nail |
| Nominal Size | 2" × .092" |
| Length | 2 in. / 50.8mm |
| Shank Diameter | .092 in. / 2.34mm |
| Head Diameter | .220 in. / approximately 5.6mm |
| Head Type | Full Round Head |
| Shank Type | Ring Shank |
| Point Type | Diamond Point |
| Collation | Wire Welded Coil |
| Collation Angle | 15° |
| Material | Q195 / Q235 Carbon Steel |
| Finish | Bright / Uncoated |
| Nails per Coil | 350 pcs |
| Coils per Carton | 30 coils |
| Calculated Carton Quantity | 10,500 nails based on current 350 pcs/coil × 30 coils/carton data |
| Primary Environment | Dry Interior / Protected Applications in Untreated Wood |
Finish note: “Bright” means the carbon-steel nail does not have the corrosion protection provided by galvanized or stainless steel fasteners. Do not automatically substitute this bright-finish SKU for an exterior siding nail.
Request 2" x .092 Nail Pricing
The annular rings along the shank mechanically engage surrounding wood fibers after driving. In suitable wood substrates, ring-shank nails generally provide greater resistance to withdrawal than comparable smooth-shank nails.
The 2-inch length and .092-inch diameter are common dimensional references within coil siding and fencing nail systems. Final suitability still depends on the attached material, required penetration and the fastening specification.
The approximately .220-inch / 5.6mm full round head provides a bearing surface against the material being fastened. Projects that specify a minimum nail-head diameter should be checked against this exact dimension before use.
The diamond point supports efficient penetration into suitable wood and wood-based materials. Driving performance depends on substrate density, nailer pressure and the complete fastener geometry.
The nails are connected with welded wire and formed into coils for automatic feeding through compatible pneumatic siding nailers. Tool compatibility should be checked by diameter, length, head geometry, wire collation and magazine specification rather than angle alone.
Bright-finish nails are uncoated carbon-steel fasteners. They are appropriate for dry, protected applications where corrosion resistance is not required and where the wood is untreated.
| Application / Environment | Bright 2" x .092 SKU |
|---|---|
| Interior Wood Paneling | Relevant where the substrate is untreated and remains dry |
| Interior Wood Cladding | Can be considered when the project does not require corrosion-resistant fasteners |
| Cabinet / Furniture Components | Possible where dimensions and penetration suit the assembly |
| Crating / Packaging | Relevant for suitable dry industrial wood assemblies |
| Exterior Fiber Cement Siding | Do not use this bright SKU as a generic recommendation; select an approved corrosion-resistant fastener |
| Exterior Vinyl Siding | Do not position this bright SKU as a standard exterior vinyl-siding fastener |
| Treated Lumber | Not recommended without a corrosion-resistant specification approved for the treatment |
| Coastal / Wet Exposure | Select an appropriate stainless or other corrosion-resistant fastener |
| Finish / Material | Corrosion Protection | General Selection |
|---|---|---|
| Bright | No protective metallic coating | Dry interior and untreated wood applications |
| Electro-Galvanized | Thin zinc coating | Protected or limited-corrosion environments where EG is permitted |
| Hot-Dip Galvanized | Heavier zinc coating | Exterior siding, fencing and treated-wood applications where the project specification permits HDG |
| 304 Stainless Steel | High corrosion resistance | Wet or demanding exterior environments where 304 is specified |
| 316 Stainless Steel | Higher resistance to chloride exposure than 304 | Coastal, salt-air and aggressive environments where 316 is specified |
KYA's current page lists bright, electro-galvanized, hot-dip galvanized, stainless steel and painted-head options within the wider siding-nail range. Confirm availability, packaging and dimensions for the exact 2" × .092 ring-shank configuration before ordering.
A siding nail should not be selected only because its length is 2 inches. Head diameter, shank diameter, shank profile, collation type, finish and required penetration can all determine whether the nail is suitable for the material and nailer.
| Selection Parameter | Featured KYA SKU | Why It Matters |
|---|---|---|
| Length | 2" / 50.8mm | Must provide the required penetration after passing through the attached material |
| Shank Diameter | .092" / 2.34mm | Affects tool compatibility and fastener strength |
| Head Diameter | .220" / 5.6mm | Must satisfy tool clearance and any project minimum-head requirement |
| Shank | Ring | Provides increased withdrawal resistance in suitable wood |
| Collation | 15° Wire Weld | Must match the nailer's magazine and feed system |
| Finish | Bright | Determines whether the fastener is appropriate for the exposure environment |
| Shank Type | General Characteristic | Typical Selection |
|---|---|---|
| Ring Shank | Annular rings engage wood fibers and increase resistance to withdrawal | Featured configuration on this 2" × .092 page |
| Smooth Shank | Straight cylindrical shank for easier driving | General fastening where increased withdrawal resistance is not required |
| Screw Shank | Twisted profile rotates during driving into suitable wood | Selected hardwood, pallet and industrial wood fastening applications |
The exact siding nailer must accept a 2-inch-long, .092-inch-diameter, wire-welded coil nail. Tool model and published fastener range should always be checked before bulk purchasing.
| Tool / Tool Type | Compatibility Guidance |
|---|---|
| Bostitch N66C / N66C-1 | Published tool range includes 15° wire-weld and plastic-insert siding nails from 1-1/4" to 2-1/2" and .080" to .092"; the featured 2" × .092 wire-coil dimensions fall within that published range |
| Other 15° Coil Siding Nailers | Confirm that the tool accepts 2" length, .092" diameter, wire-welded collation, full-round-head geometry and the required coil capacity |
| Roofing Nailers | Do not assume compatibility; roofing nailers commonly use different nail diameter, head geometry and magazine specifications |
Tool correction: the previous KYA page listed Hitachi / Metabo HPT NV45AB2. That tool is a roofing nailer designed for .120-inch wire-collated roofing nails, so it should not be listed as a confirmed match for this .092-inch siding nail.
The ring-shank design can be used in suitable interior wood paneling and cladding assemblies where corrosion protection is not required and the substrate is untreated.
The 2-inch ring-shank fastener can be considered for selected furniture frames, cabinet components and similar wood assemblies where the nail dimensions match the material thickness.
Wire-collated ring-shank nails can support repetitive fastening in dry industrial packaging, box and crate production when the required penetration and holding performance match the 2-inch fastener.
This bright-finish SKU can be used in other protected wood applications where moisture, treated lumber and corrosive exposure are not present and the project specification permits an uncoated fastener.
Exterior siding manufacturers normally require corrosion-resistant fasteners. For fiber cement, wood siding, fencing or other exposed construction, choose the required galvanized or stainless steel specification instead of automatically using the bright-finish nail on this page.
Fastener dimensions must also match the siding system. Head diameter, shank diameter, length and minimum penetration requirements can differ between fiber cement, vinyl, wood siding and exterior trim products.
The current KYA page lists 350 nails per coil and 30 coils per carton. Based on those values, one carton contains 10,500 nails. Buyers should confirm final carton weight and packing configuration on the quotation because packaging can vary by market and fastener configuration.
| Ordering Information | What to Provide |
|---|---|
| Size | 2" × .092" / 50.8 × 2.34mm |
| Head Diameter | .220" / approximately 5.6mm |
| Shank | Ring Shank |
| Point | Diamond Point |
| Collation | 15° Wire Weld |
| Finish | Bright for this SKU; specify HDG or stainless if corrosion resistance is required |
| Nailer Model | Provide exact tool manufacturer and model |
| Application | Provide siding, panel, packaging or other material specification |
| Environment | Interior, exterior, treated wood, coastal or other exposure condition |
| Quantity | Coils, cartons, pallets or annual purchasing volume |
Send Your Coil Nail Requirements
The featured nail is 2 inches / 50.8mm long with a .092 inch / 2.34mm shank diameter and approximately .220 inch / 5.6mm head diameter.
This specific product uses a ring shank, which generally provides increased withdrawal resistance in suitable wood compared with a similar smooth-shank nail.
The previous page used a 300% claim, but the supplied product data does not include the substrate, test method, penetration depth or comparison nail required to verify that exact percentage. It is more accurate to state that ring shanks increase withdrawal resistance in suitable wood.
Bright finish means the carbon-steel nail does not have a protective galvanized or stainless surface. It is intended for dry, protected applications where corrosion resistance is not required.
Bright carbon-steel nails should not be used as a general recommendation for weather-exposed siding. Use a corrosion-resistant fastener that meets the siding manufacturer's and project requirements.
Do not use the bright-finish version as a generic fiber-cement siding recommendation. Fiber-cement manufacturers typically require approved corrosion-resistant fasteners. Select the correct HDG or stainless configuration and dimensions according to the siding specification.
This bright-finish .092-inch nail should not be promoted as a universal vinyl-siding fastener. Vinyl-siding systems have specific corrosion-resistance, head-size, shank-size and penetration requirements that must be checked before use.
Bright carbon steel is not the preferred choice for preservative-treated lumber. Use a compatible corrosion-resistant fastener such as an approved hot-dip galvanized or stainless steel specification.
The current KYA specification lists 350 nails per coil.
The current KYA page lists 30 coils per carton. Based on 350 nails per coil, this corresponds to 10,500 nails per carton.
The published Bostitch N66C fastener range covers 15° siding nails from 1-1/4" to 2-1/2" long and .080" to .092" in diameter, including wire-welded coils. The featured 2" × .092 configuration falls within those published dimensional limits. Confirm the exact nail and tool configuration before production use.
No direct compatibility should be claimed. The NV45AB2 is a roofing nailer specified for .120-inch wire-collated roofing nails from 7/8" to 1-3/4", while this siding nail is .092" × 2".
No. Nail length, diameter, head size, collation type, coil dimensions and magazine design must all match. A 15° angle alone does not establish compatibility.
The current KYA page lists hot-dip galvanized as an alternative finish within the wider siding-nail range. Confirm availability and packaging for the exact 2" × .092 ring-shank configuration when requesting a quotation.
KYA lists 304 and 316 stainless steel among its wider finish and material options. Confirm the exact length, diameter, shank, head, collation and package required for the stainless version.
Contact KYA Fasteners regarding current sample availability. Test the exact nail with the intended nailer, substrate and fastening application before bulk purchasing.
Ask About 2" x .092 Coil Nails
KYA supplies wire-collated coil nails for fastener distributors, pneumatic-tool distributors, wood-product manufacturers, packaging factories and professional construction suppliers.
For quotations on 15° 2" × .092 ring-shank bright coil siding nails, provide the exact nailer model, application, required finish, quantity, packaging and destination market. For exterior siding, specify the required corrosion-resistant finish instead of the bright version.
