2-1/2-Inch X 0.105-Inch
KYA
| Availability: | |
|---|---|
| Quantity: | |
KYA 2-1/2" × .099" 15° wire coil nails measure approximately 64 mm long × 2.5 mm shank diameter and are designed for compatible pneumatic coil nailers used in siding, sheathing, fencing, decking, wooden packaging and general wood-to-wood fastening.
The featured configuration uses 15° wire-weld collation, a full round head and diamond point. Smooth, ring and screw shank options are available, together with different corrosion-protection finishes for different service environments.

2-1/2" / 64 mm length: common maximum length for many 65 mm-class siding and construction coil nailers.
.099" / 2.5 mm shank: compatible dimensional class for selected siding, sheathing, fencing and general construction coil nailers.
15° wire-weld collation: designed for pneumatic tools specified for flat-wire collated coil nails.
Full round head: provides a broad bearing surface for wood fastening applications.
Diamond point: standard point geometry for efficient wood penetration.
Smooth, ring and screw shanks: available for different driving and withdrawal-resistance requirements.
Multiple finish options: electro-galvanized, hot-dip galvanized and other corrosion-resistant configurations are available within the broader coil nail range.
High-capacity coil format: reduces reload frequency compared with stick-collated fasteners; actual nails per coil depend on the selected packing and nailer magazine capacity.
| Parameter | Specification |
|---|---|
| Fastener Type | Wire-Collated Coil Nail |
| Length | 2-1/2" / approximately 64 mm |
| Shank Diameter | .099" / approximately 2.5 mm |
| Collation Angle | 15° |
| Collation Type | Wire Weld |
| Head Style | Full Round Head |
| Point | Diamond Point |
| Shank Options | Smooth / Ring / Screw |
| Featured Finish | Electro-Galvanized |
| Other Finish Options | Hot-Dip Galvanized and other available configurations depending on order specification |
| Coil Count | Depends on coil diameter, nailer magazine capacity and packing configuration; confirm when ordering |
When replacing an existing coil nail, specify the nail length, shank diameter, head diameter, head style, shank type, collation angle, collation type and finish. Matching only the 2-1/2" length is not sufficient to confirm nailer compatibility.
The .099" shank diameter is approximately 2.5 mm. This diameter is used across several coil-nail applications including siding, fencing, sheathing, decking, wooden packaging and selected light-framing applications.
Application alone does not determine compatibility. A .099" siding nail and a .099" framing nail may use different head diameters even when the length, shank and collation angle appear similar.

The nails are welded to two thin wires to form a flexible coil for use in compatible 15° pneumatic coil nailers. Wire-weld collation is widely used in siding, sheathing, fencing, pallet and industrial wood-fastening systems.
The stated 15° angle describes the fastener arrangement inside the coil. It does not mean the nail is driven into the workpiece at a 15° angle.

The featured nail uses a full round head and diamond point. The head provides bearing area against the wood surface, while the diamond point is a conventional geometry for wood penetration.
Head diameter is especially important when matching .099" coil nails to a pneumatic nailer. Buyers replacing an existing nail should provide the required head diameter or an existing nail sample in addition to the length and shank diameter.
| Shank Type | Selection Guidance |
|---|---|
| Smooth Shank | General wood fastening where the project specification does not require an enhanced-withdrawal shank. |
| Ring Shank | Ring profile increases mechanical interaction with wood fibers and is commonly selected where greater withdrawal resistance is required. |
| Screw Shank | Spiral shank option used in selected pallets, crates, decking and industrial wood assemblies. |
The amount of withdrawal resistance depends on wood species, moisture content, penetration, nail dimensions and shank geometry. A fixed percentage increase should not be assumed without test data for the exact nail and substrate.
The featured configuration uses an electro-galvanized zinc finish. Electro-galvanizing provides corrosion protection compared with bright uncoated steel and is commonly used for dry, interior and protected-service applications.
Electro-galvanized fasteners should not automatically be specified for preservative-treated lumber, persistent exterior moisture or coastal environments. These applications can require hot-dip galvanized, stainless steel or another specifically approved corrosion-resistant fastener.
| Finish | Typical Selection |
|---|---|
| Bright | Dry interior wood and industrial packaging where corrosion protection is not required. |
| Electro-Galvanized | Indoor and protected applications requiring basic zinc corrosion protection. |
| Hot-Dip Galvanized | Exterior and many treated-wood applications where the required hot-dip coating specification is met. |
| Stainless Steel | Wet, coastal, chloride-containing and other corrosive environments when the specified stainless grade is appropriate. |
Always match fastener finish to the wood treatment, connector material, moisture exposure and project requirements. Do not mix incompatible fastener and connector metals.
Siding: selected wood and compatible siding systems when nail head, shank and finish meet the siding manufacturer's requirements.
Sheathing: compatible non-structural and specified sheathing applications.
Fencing: wood fencing and related outdoor assemblies with a suitable corrosion-resistant finish.
Decking: selected wood fastening where the project specifies the nail dimensions, shank and corrosion protection.
Pallets: wooden pallet assembly and repair where .099" × 2-1/2" coil nails meet the pallet specification.
Crates and boxes: high-volume wooden packaging and industrial assembly.
Subflooring: selected applications when this fastener dimension and fastening schedule are specified.
Light framing: selected wood framing operations where the required nail diameter, head, length and fastening schedule permit .099" coil nails.

The 2-1/2" × .099" dimensional class falls within the fastener range of several professional 65 mm siding nailers. For siding work, the nail head diameter and corrosion protection are as important as length and shank diameter.
Always follow the siding manufacturer's fastening schedule. Wood siding, fiber-cement siding and engineered siding products can specify different head dimensions, penetration, shank types and corrosion-resistant finishes.
Wire-collated coil nails are commonly used for repetitive sheathing and subfloor fastening. However, structural assemblies can specify minimum nail diameter, head diameter, penetration and spacing.
A .099" × 2-1/2" nail should only be substituted for another framing or sheathing fastener when the building system or engineering specification permits that dimension.
The .099" × 2-1/2" wire coil format is also suitable for selected pallet, crate and wooden box manufacturing applications. Coil-fed pneumatic tools allow repetitive fastening with fewer reloads than many stick-nail systems.
For pallets or packaging with specified joint performance, select the shank type, penetration and nail dimensions according to the pallet or packaging design.
Some pneumatic siding nailers that accept .099" fasteners are used for fiber-cement products, but the nail itself must still meet the siding manufacturer's required head diameter, length, material, corrosion protection and fastening schedule.
Do not select this product for a fiber-cement system solely because the nailer can drive it. Verify the exact siding product requirements before ordering.
| Shank Diameter | Length Range | Shank Options | Finish Options |
|---|---|---|---|
| .080" | 1-1/4"–2" | Smooth / Ring / Screw | Bright / EG / HDG |
| .092" | 1-1/2"–2-1/2" | Smooth / Ring / Screw | Bright / EG / HDG |
| .099" | 1-1/2"–2-1/2" | Smooth / Ring / Screw | Bright / EG / HDG |
| .113" | 2"–3" | Smooth / Ring / Screw | Bright / EG / HDG |
| .120"–.131" | 2"–3-1/2" | Smooth / Ring / Screw | Bright / EG / HDG / Stainless depending on specification |

The following professional coil nailers publish length and shank-diameter ranges that include a 2-1/2" × .099" wire-collated nail. Final compatibility still depends on head diameter, wire-collation geometry and coil capacity.
| Nailer | Published Wire-Nail Range | Compatibility Check |
|---|---|---|
| Metabo HPT NV65AH2 | 1-1/2"–2-1/2", .090"–.099", 15° wire coil | Length and shank match; tool capacity is approximately 200–300 nails, so coil count must also match. |
| MAX CN565S | Wire nails approximately 45–65 mm, 2.3–2.5 mm, 15° | Length and shank match; confirm head diameter and coil configuration. |
| BOSTITCH N66C | Approximately 32–64 mm, 2.03–2.5 mm, 15° | Length and shank fall within published range; confirm head diameter before use. |
| KYA CN70 | Approximately 45–70 mm, 2.3–2.9 mm, 15° flat wire coil | Length and shank fall within published range; magazine capacity is approximately 225–300 nails. |
| SENCO SCN60XP / SCN65XP Class | Selected models accept .099" wire coil nails including 2-1/2" length | Confirm exact model, head size, coil count and published fastener range. |
The NV65AH2 accepts 15° wire-collated nails from 1-1/2" to 2-1/2" with .090"–.099" shanks. This places the featured 2-1/2" × .099" nail at the maximum published wire-nail length and diameter for the tool.
The NV65AH2 magazine holds approximately 200–300 nails. A coil containing more than the tool's rated capacity should not be assumed to fit even if the nail dimensions are correct.
MAX publishes the CN565S for 15° wire-collated nails approximately 45–65 mm long and 2.3–2.5 mm in diameter. A 64 × 2.5 mm nail is within that dimensional range.
The nail head must also match the tool's published range. Verify the finished head diameter of the supplied coil nail before production use.
BOSTITCH publishes N66C siding nailer variants for approximately 32–64 mm nails with shank diameters up to 2.5 mm. This places 64 × 2.5 mm at the upper end of the dimensional range.
BOSTITCH models and regional versions can specify particular fastener heads and coil formats, so verify the exact N66C version before treating another manufacturer's coil as interchangeable.
The KYA CN70 is specified for 15° flat-wire coil nails approximately 45–70 mm long with 2.3–2.9 mm shanks. The 64 × 2.5 mm configuration is within those published dimensions.
The CN70 magazine capacity is approximately 225–300 nails. Order the coil configuration that fits the magazine rather than assuming every .099" × 2-1/2" production coil uses the same nail count.
Nails per coil are not determined by shank diameter and length alone. Coil outside diameter, wire spacing and magazine design also affect how many nails a tool can load.
For example, professional 65 mm coil nailers can have capacities ranging from approximately 200 to 400 nails. Specify the intended nailer when ordering so the coil diameter and nail count are suitable for the tool.
KYA supplies .099" wire-collated coil nails in different coil-count and carton configurations. The broader KYA coil nail range lists approximately 300–350 nails per coil for .099" fasteners depending on nail length and packing configuration.
For 2-1/2" nails, confirm the required nails per coil, coils per carton, total nails per carton and maximum magazine capacity of the intended nailer before finalizing the order.

| Selection Item | What to Specify |
|---|---|
| Nail Length | 2-1/2" / approximately 64 mm |
| Shank Diameter | .099" / approximately 2.5 mm |
| Shank Type | Smooth, ring or screw according to the application. |
| Head Diameter | Match the exact pneumatic nailer and application specification. |
| Collation | 15° wire-weld coil. |
| Finish | Select electro-galvanized, hot-dip galvanized or another available material according to exposure. |
| Nailer Model | Provide the exact brand and model for compatibility verification. |
| Coil Count | Match the nailer's rated magazine capacity. |
| Application | Provide siding, sheathing, fencing, decking, pallet, crate or other intended use. |
The featured nail is approximately 2-1/2" / 64 mm long with a .099" / 2.5 mm shank diameter.
This product is a 15° wire-weld collated coil nail. Do not substitute it solely on the basis of length for a tool designed only for another collation type.
The NV65AH2 publishes a 15° wire-coil range of 1-1/2"–2-1/2" and .090"–.099", so the length and shank size are within its range. Confirm head diameter and use a coil count within the tool's approximately 200–300 nail capacity.
MAX publishes the CN565S for wire nails approximately 45–65 mm long and 2.3–2.5 mm in diameter. The 64 × 2.5 mm size is within that range, subject to matching head diameter and coil geometry.
BOSTITCH N66C variants publish fastener ranges up to approximately 64 mm long and 2.5 mm in shank diameter. Verify the exact N66C version, nail head diameter and coil configuration before use.
The KYA CN70 publishes a 15° flat-wire coil nail range of approximately 45–70 mm long and 2.3–2.9 mm in diameter. The 64 × 2.5 mm dimensions fall within that range. Keep the coil count within the tool's 225–300 nail magazine capacity.
Selected SENCO SCN60XP and SCN65XP platforms accept .099" 15° wire-collated nails at 2-1/2" length. Verify the exact SCN model, head diameter and magazine capacity before use.
Some N80CB variants accept 2.5 mm / .099" coil nails, but they are heavier construction-nailer platforms with their own head-diameter and coil requirements. Do not assume compatibility from length and shank diameter alone.
KYA supplies .099" coil nails in different coil capacities. The broader range uses approximately 300–350 nails per coil depending on length and packing. Specify the intended nailer so the supplied coil fits its magazine capacity.
Different coil nailers have different magazine capacities. For example, some 65 mm siding nailers hold approximately 225–300 nails while others can accept larger coils. A dimensionally correct nail can still have a coil that is too large for a particular magazine.
Smooth shank is used for general fastening where enhanced withdrawal resistance is not specified. Ring shank adds annular ridges that mechanically interact with wood fibers and is often selected when greater withdrawal resistance is required.
No fixed percentage should be assumed. Withdrawal performance varies with wood species, moisture, nail geometry, penetration and the specific ring profile.
Do not assume that standard electro-galvanized nails are suitable for preservative-treated lumber. Treated-wood applications commonly require hot-dip galvanized, stainless steel or another specifically approved corrosion-resistant fastener.
Outdoor suitability depends on the supplied finish and exposure conditions. Standard electro-galvanized nails are better suited to protected conditions; persistent exterior moisture can require hot-dip galvanized or stainless steel fasteners.
KYA's broader .099" coil nail range includes hot-dip galvanized configurations. Confirm the required coating specification, shank type and packing when requesting a quotation.
Only when the exact nail dimensions, head diameter, corrosion protection and fastening schedule meet the fiber-cement manufacturer's requirements. Nailer compatibility alone does not confirm approval for a siding system.
A .099" × 2-1/2" coil nail can be used in selected light-framing and wood-construction applications, but structural framing requirements vary. Confirm required nail diameter, head, penetration and fastening schedule before substitution.
Yes. Pallet, crate and wooden box manufacturing are common applications for 15° wire-collated coil nails. Select smooth, ring or screw shank according to the required joint performance.
Provide the required quantity, 2-1/2" × .099" dimensions, shank type, finish, required head diameter, nails per coil, pneumatic nailer model, application and destination market.
KYA supplies 2-1/2" × .099" 15° wire-collated coil nails for siding contractors, fencing suppliers, pallet and crate manufacturers, construction fastener distributors and professional wood-product manufacturers. Send your required shank type, finish, head diameter, packing configuration and nailer model to confirm the appropriate coil nail specification.
FURNITURE ACCESSORIES
OFFICE SUPPLIES
PACKAGING MATERIAL