| Quantity: | |
|---|---|
KYA 15° wire-collated electro-galvanized screw shank coil siding nails are designed for professional siding, sheathing, fencing, trim and other compatible wood fastening applications. This featured configuration measures 2-1/2" (64 mm) in length with a .092" (2.34 mm) shank diameter and combines a screw shank, full round head and wire-welded coil format.
The screw shank profile is designed to create strong mechanical engagement with suitable wood substrates during installation. The electro-galvanized zinc coating provides a clean surface finish and a degree of corrosion protection for applications where the specified coating is appropriate.
For exterior projects, treated lumber, fiber cement products or environments with greater moisture and corrosion exposure, always confirm the required fastener coating or stainless steel grade against the project specification and material manufacturer's installation requirements.
2-1/2" nail length: approximately 64 mm for compatible siding, sheathing and general construction fastening.
.092" shank diameter: approximately 2.34 mm.
Screw shank: designed to increase mechanical engagement with suitable wood substrates.
15° wire-welded coil: configured for compatible wire-coil pneumatic nailers.
Electro-galvanized finish: zinc-coated surface for corrosion protection appropriate to the intended application.
Full round head: provides a broad bearing surface at the fastening point.
Coil format: supports repetitive fastening with fewer loading interruptions than short strip formats.
| Parameter | Specification |
|---|---|
| Product Type | Wire Collated Coil Siding Nail |
| Length | 2-1/2" / 64 mm |
| Shank Diameter | .092" / approximately 2.34 mm |
| Shank Type | Screw Shank |
| Collation Angle | 15° |
| Collation Type | Wire Welded Coil |
| Head Type | Full Round Head |
| Finish | Electro-Galvanized |
| Page-Listed Nails per Coil | 400 pcs; confirm the supplied coil configuration when ordering |
| Page-Listed Carton Configuration | 30–40 coils per carton; confirm current packing configuration with quotation |
| Listed Tool Examples | Bostitch N66C, Hitachi NV65AH, MAX CN565S; verify the exact tool model and fastener range before ordering |
When matching a coil nail to a pneumatic nailer, verify the fastener length, shank diameter, collation type, collation angle and magazine capacity. Nailers within the same product family may accept different nail dimensions or coil capacities.
A screw shank has a twisted profile rather than a plain cylindrical surface. As the nail is driven into a suitable wood substrate, the profile creates additional engagement between the fastener and surrounding material.
This makes screw shank coil nails useful where secure fastening and withdrawal resistance are important. Actual performance depends on the substrate, fastener dimensions, installation depth, spacing, tool settings and project specification.
The 2-1/2" × .092" configuration can be considered for professional fastening applications where its dimensions, coating and shank design meet the installation requirements.
Wood siding
Compatible fiber cement siding systems
Wall and roof sheathing
Soffit, fascia and exterior trim
Wood fencing
Decking-related fastening where the specified finish is suitable
Plywood and panel fastening
For fiber cement products, treated lumber and other material-specific installations, follow the substrate or siding manufacturer's requirements for nail length, head configuration, coating and corrosion resistance.
Electro-galvanizing applies a relatively thin zinc coating to the steel fastener. It provides a clean appearance together with corrosion protection, but the correct coating should always be selected according to moisture exposure, substrate chemistry and project requirements.
For more demanding outdoor environments, treated lumber or higher-corrosion locations, hot-dip galvanized or stainless steel fasteners may be more appropriate when required by the project specification.
| Finish | General Selection Consideration |
|---|---|
| Bright | For applications where corrosion-resistant coating is not required. |
| Electro-Galvanized | Provides a zinc-coated surface and a degree of corrosion protection. |
| Hot-Dip Galvanized | Available where a heavier galvanized coating is required for the intended application. |
| 304 / 316 Stainless Steel | Available for applications requiring higher corrosion resistance; select the stainless grade according to the service environment. |
Before ordering, compare the nail specifications with the fastener range published for your exact pneumatic nailer model. For this product, the key dimensions are 2-1/2" length, .092" shank diameter and wire-coil collation.
| Compatibility Check | Featured Nail |
|---|---|
| Fastener Length | 2-1/2" / 64 mm |
| Shank Diameter | .092" / approx. 2.34 mm |
| Collation | Wire Welded Coil |
| Nominal Collation Angle | 15° |
| Shank | Screw Shank |
| Finish | Electro-Galvanized |
| Tool Information Needed | Exact nailer brand and model |
The current product information lists Bostitch N66C, Hitachi NV65AH and MAX CN565S as tool examples. Because tool generations and magazine specifications may differ, confirm your exact model before placing a production order.
When requesting a quotation, provide the required quantity, destination market, nailer model, application and preferred packing configuration. This helps confirm the correct nail dimensions, collation, finish and packaging before ordering.
KYA also supplies coil nails in different lengths, shank styles and surface finishes. If the featured electro-galvanized screw shank configuration does not match your project, contact KYA to discuss available coil nail specifications.
Request Pricing and Packing Details
The featured nail measures 2-1/2" (64 mm) long with a .092" shank diameter, approximately 2.34 mm.
A screw shank nail has a twisted shank profile that creates additional mechanical engagement with suitable wood substrates as the nail is driven. It is selected for applications where secure fastening and withdrawal resistance are important.
No. Both use zinc for corrosion protection, but the coating processes and coating characteristics differ. Select electro-galvanized, hot-dip galvanized or stainless steel according to the exposure conditions and project requirements.
They may be used in compatible fiber cement applications when the nail length, shank diameter, head configuration and corrosion protection meet the siding manufacturer's installation requirements. Check the specific siding specification before installation.
Yes, fencing and sheathing are typical applications for coil nails of this type when the 2-1/2" length, .092" diameter, screw shank and electro-galvanized finish are appropriate for the material and project.
The Bostitch N66C family accepts coil nails up to 2-1/2" long and .092" in diameter. Confirm the exact N66C model, wire-collation requirements and magazine capacity before ordering.
MAX CN565S-series siding coil nailers are designed for compatible wire or plastic coil fasteners and include fastener ranges covering this general size. Check the specifications of your exact tool version before use.
The current product information lists 400 nails per coil. Because nailer magazine capacity and packing configurations vary, confirm the exact coil quantity and carton packing when requesting a quotation.
Provide your required quantity, destination country or market, application, pneumatic nailer model and any specific packing requirements. If another finish or nail dimension is required, include those details with the inquiry.
KYA supplies wire-collated coil nails for siding, sheathing, fencing and other professional fastening applications. For this 2-1/2" × .092" electro-galvanized screw shank coil nail, send your quantity, application, nailer model and packing requirements to confirm the appropriate supply configuration.
