| Length: | |
|---|---|
| Quantity: | |
KYA 15 Gauge Polymer Composite Finish Nails are non-metal straight-strip fasteners designed for professional woodworking, cabinetry, furniture, CNC fixturing, PVC millwork, boatbuilding and composite manufacturing. The F15 Series is available in 19mm, 25mm and 32mm lengths.
The listed F15 profile uses an approximately 3.0mm head and 1.8mm thickness. Polymer composite construction provides a non-metal, non-conductive fastening option for applications where conventional steel nails may create corrosion, metal contamination or downstream machining concerns.
These nails require a compatible 15 gauge polymer composite finish nailer. Conventional steel finish nailers should not be assumed to accept F15 polymer nails simply because they use the same nominal gauge.
| Specification | Details |
| Product | 15 Gauge Polymer Composite Finish Nails |
| Series | F15 |
| Gauge | 15 Gauge |
| Material | Polymer Composite |
| Head Width | Approx. 3.0mm |
| Fastener Thickness | Approx. 1.8mm |
| Lengths | 19mm, 25mm, 32mm |
| Approx. Inch Sizes | 3/4", 1", 1-1/4" |
| Shank | Smooth |
| Collation | Straight Strip |
| Electrical Property | Non-Conductive Polymer Composite |
| Packing | 2,000 pcs/box |
| Tool Type | Dedicated 15GA Polymer Composite Finish Nailer |
| Applications | Cabinetry, Trim, Furniture, CNC Fixturing, PVC Millwork, Boatbuilding, Composites and Casket Manufacturing |
| Model | Head | Thickness | Length | Approx. Inch | Pcs/Box | Boxes/Carton |
|---|---|---|---|---|---|---|
| F15-19 | 3.0mm | 1.8mm | 19mm | 3/4" | 2,000 | 32 |
| F15-25 | 3.0mm | 1.8mm | 25mm | 1" | 2,000 | 32 |
| F15-32 | 3.0mm | 1.8mm | 32mm | 1-1/4" | 2,000 | 16 |
The F15 Series uses an approximately 3.0mm head, providing a defined bearing surface while maintaining a compact finish-nail profile for cabinetry, trim, furniture and fabricated components.
The head dimension should be considered together with the fastener thickness and magazine design when selecting a compatible polymer finish nailer.
KYA lists an approximately 1.8mm fastener thickness for the F15 Series. This heavier polymer profile is designed for applications requiring more holding capability than lighter composite brads or pins.
Gauge alone does not determine compatibility. Head shape, fastener cross-section, collation and magazine geometry must also match the nailer.
The F15 Series is available in three listed lengths to cover different material thicknesses and penetration requirements.
| Model | Length | Selection Consideration |
|---|---|---|
| F15-19 | 19mm / Approx. 3/4" | Suitable where shorter penetration is required in compatible trim, fabrication or woodworking components. |
| F15-25 | 25mm / 1" | General option for compatible cabinetry, furniture, trim and fabrication applications. |
| F15-32 | 32mm / Approx. 1-1/4" | Provides longer penetration for suitable thicker materials and assemblies. |
Select nail length according to workpiece thickness, substrate density, required penetration and the operating range of the composite finish nailer. Longer nails should not automatically be treated as the best option for every joint.
F15 finish nails are made from polymer composite material rather than conventional steel. This allows manufacturers to create a mechanical connection without leaving a normal metallic finish nail in the component.
This feature can be useful in woodworking, PVC fabrication, CNC workholding and composite production where hidden metal fasteners may interfere with later machining or inspection.
Because the fastener body is polymer composite, it does not develop conventional steel rust or introduce rust staining associated with untreated steel nails.
Suitability for outdoor, marine, chemical, UV-exposed or high-temperature environments still depends on the polymer material, substrate and complete service conditions.
Polymer composite nails are non-metal and non-conductive. This can be useful where electrical conductivity from a conventional steel fastener is undesirable.
For electrical or safety-critical applications, confirm the requirements of the complete installed assembly rather than relying on the fastener material alone.
Polymer composite finish nails are commonly selected for components that may later be cut, routed, sanded, shaped or planed.
Unlike a hidden steel nail, a compatible polymer fastener can be processed together with wood, PVC and composite materials. This makes the F15 format useful in CNC fixturing, cabinetry, millwork and fabrication.
Cutting-tool performance still depends on the polymer grade, cutter material and machining conditions. Production users should test the exact fastener with sensitive tooling before high-volume machining.
F15 polymer finish nails require a nailer designed for the corresponding composite fastener profile. Current F15 composite tool systems include dedicated pneumatic finish nailers rather than conventional steel finish nailers.
| Tool Reference | Fastener Reference |
|---|---|
| Spotnails CB1538C | 15GA composite finish nails including F15-19, F15-25 and F15-32. |
| OMER B17P.763 | Professional polymer composite finish-nail system covering F15-type fasteners. |
| OMER 17P.32 | Referenced for F15 composite finish nails through approximately 32mm. |
| Senco SPFN15XP | Dedicated composite finish-nailer reference for F15 fasteners. |
| Red Hawk FN15S | Referenced for the same general F15 polymer composite finish-nail format. |
Always confirm the exact tool model, fastener cross-section, head geometry, collation and supported nail length before ordering replacement nails.
Cabinetry and cabinet components
Decorative trim and molding
Furniture manufacturing
CNC fixturing and spoilboard workholding
PVC millwork and trim
Window and door components
Boatbuilding
Fiberglass lay-up
Composite manufacturing
Casket manufacturing
Casegoods
Woodworking and millwork
Polymer composite finish nails can be used for compatible cabinet components, furniture, molding and trim where manufacturers want a non-metal fastening point.
They are particularly useful where the component may later be routed, sanded, trimmed or machined. Nail length should be selected according to the actual material thickness and required penetration.
15 gauge polymer finish nails are used in CNC fixturing and spoilboard applications where a temporary workholding fastener may be located within a machining area.
The fastener grade, workpiece, cutter path and required holding force should be evaluated before production. Composite nails should not replace clamps or engineered workholding where higher loads require another securing method.
Polymer composite nails can be used in selected marine, fiberglass and composite manufacturing processes where leaving a steel finish nail in the assembly is undesirable.
Compatibility depends on the laminate, resin system, core material, temperature and production process. Test the fastener with the actual composite system before volume production.
Dedicated composite finish-nail systems are also used for PVC trim and millwork where a non-metal fastening option is required.
PVC density, temperature, profile thickness and edge distance can affect fastening performance. Test the selected F15 length with the actual profile before repetitive installation.
| Buyer Check | What to Confirm |
|---|---|
| Gauge | 15 Gauge polymer composite format. |
| Head | Approx. 3.0mm. |
| Thickness | Approx. 1.8mm. |
| Length | 19mm, 25mm or 32mm according to material thickness and penetration requirements. |
| Material | Polymer composite. |
| Nailer | Dedicated F15-compatible polymer composite finish nailer. |
| Substrate | Test holding performance in the actual wood, PVC or composite material. |
| Machining | Confirm polymer grade and tooling compatibility before cutting through the fastener. |
| Model | Length | Pcs/Box | Boxes/Carton |
|---|---|---|---|
| F15-19 | 19mm | 2,000 | 32 |
| F15-25 | 25mm | 2,000 | 32 |
| F15-32 | 32mm | 2,000 | 16 |
KYA supplies polymer composite finish nails for cabinet manufacturers, furniture factories, CNC users, PVC fabricators, boat builders, composite manufacturers and fastener distributors.
Custom length, head, color and packaging requirements can be discussed for bulk orders. Provide the exact nailer model, application, required dimensions and purchasing quantity when requesting a quotation.
KYA supplies polymer composite finish nails, brad nails and other non-metal fastening products in multiple lengths and profiles for professional woodworking and industrial manufacturing.
KYA lists F15-19 at 19mm, F15-25 at 25mm and F15-32 at 32mm.
The listed head width is approximately 3.0mm.
KYA lists an approximately 1.8mm thickness for the F15 Series.
No. They are made from polymer composite material rather than conventional steel.
The polymer fastener itself does not develop conventional steel rust because it does not contain a normal steel nail body.
The polymer composite fastener is non-conductive. Verify the complete assembly for any electrical or safety-critical installation.
Polymer composite nails are commonly used in applications where the workpiece may later be sawed, routed, sanded or planed. Confirm compatibility with the actual polymer grade and cutting tools.
No absolute guarantee should be assumed. Polymer fasteners reduce the problems associated with hidden steel nails, but performance depends on fastener grade, blade material, cutter geometry and machining conditions.
Yes. Dedicated 15 gauge composite finish-nail systems are commonly used for CNC fixturing and spoilboard workholding. Verify the required holding force and cutter path for the actual operation.
Yes. Cabinetry, decorative trim, furniture and molding are common applications for compatible F15 polymer composite finish-nail systems.
No. The correct nail length depends on trim thickness, receiving substrate, penetration requirements and the nailer's supported range.
Yes, compatible composite finish-nail systems are used in PVC millwork and trim. Test the selected length with the actual PVC profile and installation conditions.
Yes. Wood boat building and selected composite fabrication are established applications for polymer composite finish-nail systems.
The nail primarily provides mechanical fastening. Actual holding performance depends on polymer material, substrate, penetration and installation conditions and should be tested in the intended application.
The nail itself is non-metal polymer composite. Detection-sensitive production should still be validated using the actual detector settings and complete finished product.
Current industry references include Spotnails CB1538C, OMER B17P.763, OMER 17P.32, Senco SPFN15XP and Red Hawk FN15S. Confirm exact fastener compatibility with the tool before purchasing.
No. Many conventional 15 gauge finish nailers are designed for steel DA or other metal fasteners. Use a nailer specifically designed for the polymer composite F15 profile.
KYA lists 2,000 nails per box for F15-19, F15-25 and F15-32.
Custom length, head, color and packaging requirements can be discussed for bulk orders. Provide the nailer model, application and required dimensions when requesting a quotation.
