| Quantity: | |
|---|---|
KYA 2¼" × .113" 15° wire collated nail screws are designed for professional subfloor, decking, sheathing, fencing and woodworking applications. The featured size measures 57mm × 2.87mm and uses a square drive with wire-coil collation.
This .113" diameter configuration is supplied with 250 fasteners per coil. Fine and coarse thread options are available for different wood and panel fastening requirements.
| Parameter | Specification |
|---|---|
| Diameter | .113" (2.87mm) |
| Length | 2¼" (57mm) |
| Collation Angle | 15° |
| Collation Type | Wire Collated Coil |
| Drive Type | Square Drive |
| Thread Options | Fine or Coarse |
| Fasteners per Coil | 250 |
| Available Finishes | Bright, Electro-Galvanized, Hot Dip Galvanized, Mechanical Galvanized |
| Referenced Tool Brands | Bostitch, Hitachi, Senco and Max; confirm the exact tool model accepts the complete 15° wire-coil fastener specification. |
| Diameter | Length Range | Angle | Fasteners/Coil |
|---|---|---|---|
| .099" (2.5mm) | 1⅜"–3" (35–75mm) | 15° | 300 |
| .113" (2.87mm) | 2"–3½" (50–90mm) | 15° | 250 |
| .120" (3.05mm) | 2¼"–4" (55–100mm) | 15° | 225 |
| .131" (3.33mm) | 2½"–4" (65–100mm) | 15° | 225 |
The featured fastener uses a square drive recess, providing positive engagement with the matching driver bit when adjustment or removal is required after installation.
Use the correct square-drive bit size for the selected fastener configuration. Drive dimensions can vary between nail-screw products, so the matching bit should be confirmed before installation.
Fine thread versions are available for suitable wood and panel applications requiring controlled thread engagement.
Coarse thread versions are available for suitable softwood and other compatible substrates where a more aggressive thread profile is preferred.
Thread selection should be matched to the substrate, penetration depth and required fastening performance rather than selected by material name alone.
These nail screws use 15° wire coil collation for sequential feeding through compatible pneumatic coil equipment. The featured .113" configuration contains 250 fasteners per coil.
Not every 15° coil nailer accepts nail screws. Tool compatibility should be checked using the complete specification, including collation type, diameter, length, head geometry, drive configuration and the tool manufacturer's approved fastener range.
Subfloor – suitable plywood and OSB fastening
Decking – compatible wood and panel applications
Sheathing – wall and roof panel fastening
Fencing – rails and pickets
Fiber cement board – suitable siding applications
Cabinet frames – furniture and woodworking assembly
| Finish | Product Range Information |
|---|---|
| Bright | Available for suitable dry interior applications. |
| Electro-Galvanized | Available where light corrosion protection is required. |
| Hot Dip Galvanized | Available for suitable exterior and treated-lumber applications. |
| Mechanical Galvanized | Available for specified heavy-duty fastening requirements. |
The featured fastener measures 2¼" (57mm) long and .113" (2.87mm) in diameter.
This model uses a square drive. Use the matching square driver bit when adjustment or removal is required.
The .113" diameter configuration is listed with 250 fasteners per coil.
The product range includes fine and coarse thread options for different fastening requirements.
No. A 15° magazine angle alone does not establish compatibility. Confirm that the exact tool supports wire-collated nail screws with the required diameter, length, head geometry and coil configuration.
The current product information references Bostitch, Hitachi, Senco and Max. Exact compatibility should be verified by tool model before ordering.
The wider product range lists Bright, Electro-Galvanized, Hot Dip Galvanized and Mechanical Galvanized finishes.
The listed minimum order quantity is 1 pallet.
Yes. The current product information lists OEM custom head and thread options.
The current product information lists approximately 30–40 coils per carton depending on the fastener size. Confirm the packing configuration for the selected specification when ordering.
The current product information lists a lead time of 15–25 days.
Since 2003, KYA Fasteners has supplied collated fasteners to professional buyers, distributors and contractors in more than 50 countries, including the USA, Canada, UK and Australia.
Purchasing information for this product includes MOQ 1 pallet, OEM custom head/thread and a listed 15–25 day lead time.
