| Length: | |
|---|---|
| Material: | |
| Color: | |
| Quantity: | |
KYA 8006 fine wire staples are part of the 21 gauge 80 Series used with compatible upholstery and fine wire staplers. The 8006 model has a 6mm (1/4") leg length, 12.8mm nominal 1/2" crown and 0.90mm × 0.70mm wire profile.
The published galvanized 8006 configuration uses a chisel point and glue collation, with 125 staples per stick and 10,000 staples per box. The wider KYA 80 Series includes additional leg lengths for different upholstery, screening, insulation and light fastening requirements.
| Parameter | 8006 Specification |
|---|---|
| Model | 8006 / 80/06 |
| KYA Code | KYA-8006 |
| Series | 80 Series Fine Wire Staples |
| Gauge | 21 Gauge |
| Leg Length | 6mm / 1/4" |
| Crown | 12.8mm / nominal 1/2" |
| Wire Width | 0.90mm |
| Wire Thickness | 0.70mm |
| Published Wire Designation | 0.84# |
| Point Type | Chisel Point |
| Standard Finish | Galvanized |
| Collation | Glue Collated |
| Pcs/Stick | 125 pcs |
| Pcs/Box | 10,000 pcs |
| Boxes/Carton | 20 boxes |
| Cartons/Pallet | 40 cartons |
The specifications above describe the 8006 / 80/06 6mm model. Other 80 Series leg lengths such as 8008, 8010, 8012, 8014 and 8016 are separate size configurations.
The model number identifies the leg length within the common 80 Series naming system. Buyers should specify the exact model rather than ordering only by “80 Series.”
| Model | Leg Length | Crown | Wire | Pcs/Stick | Pcs/Box | Boxes/Ctn | Ctns/Pallet |
|---|---|---|---|---|---|---|---|
| 8006 / 80/06 | 6mm / 1/4" | 12.8mm | 0.90 × 0.70mm | 125 | 10,000 | 20 | 40 |
| 8008 / 80/08 | 8mm / 5/16" | 12.8mm | 0.90 × 0.70mm | 125 | 10,000 | 20 | 40 |
| 8010 / 80/10 | 10mm / 3/8" | 12.8mm | 0.90 × 0.70mm | 125 | 10,000 | 10 | 60 |
| 8012 / 80/12 | 12mm / 1/2" | 12.8mm | 0.90 × 0.70mm | 125 | 10,000 | 10 | 40 |
| 8014 / 80/14 | 14mm / 9/16" | 12.8mm | 0.90 × 0.70mm | 125 | 10,000 | 10 | 40 |
| 8016 / 80/16 | 16mm / 5/8" | 12.8mm | 0.90 × 0.70mm | 125 | 10,000 | 10 | 40 |
KYA also publishes a broader 80 Series range beginning at 4mm. The detailed packaging information available on this page covers the 6mm through 16mm configurations shown above.
The KYA 80 Series uses a 21 gauge fine wire profile measuring 0.90mm wide × 0.70mm thick. The published crown is 12.8mm, commonly described as a nominal 1/2-inch crown.
When replacing another manufacturer's 80 Series staple, compare the actual crown, wire dimensions and leg length rather than relying only on the “21GA” or “1/2 crown” description.
KYA specifies a chisel point for the galvanized 80 Series staples. The point is designed for penetration through compatible fabric, upholstery backing, screening and other light fastening materials.
The staples are glue collated in 125-piece strips. Correct staple dimensions, tool loading and stapler condition all affect feeding and driving performance.
KYA publishes PREBENA A, BeA 80, SENCO AT, BOSTITCH 86/AZ33, DUOFAST 301, FASCO 80, OMER 80, HAUBOLD 800 and HOLZHER K as reference tool or staple families associated with the 80 Series.
These references should not be treated as a guarantee that every tool in each family accepts every KYA 80 Series size. Confirm the exact stapler model, crown profile, wire dimensions and accepted leg-length range before ordering.
| Reference Family | What to Confirm |
|---|---|
| BeA 80 | Exact tool model, 21GA profile, crown dimensions and accepted leg length. |
| PREBENA A | Actual staple dimensions and accepted length range for the specific tool. |
| FASCO 80 | Crown, wire profile and leg length before substitution. |
| OMER 80 | Exact tool and fastener dimensions because published manufacturer dimensions can differ. |
| DUOFAST 301 | Tool model and accepted staple profile. |
| BOSTITCH 86 / AZ33 | Exact fastener specification and leg-length range for the tool. |
The short 6mm / 1/4" leg makes 8006 particularly relevant where the material and substrate require a shorter 80 Series staple. Final suitability depends on material thickness, required penetration and the fastening tool.
Furniture upholstery and re-upholstery
Fabric fastening
Window and door screening
Craft and decorative assembly
Light furniture trim
Picture frame work
Selected cabinet backing applications
Light sheet and flexible material fastening
KYA publishes galvanized wire, stainless steel and aluminum material options for the wider 80 Series. The detailed packaging chart on this page describes the galvanized configurations.
| Material | Selection Consideration |
|---|---|
| Galvanized Wire | Published standard configuration in the size and packaging table. |
| Stainless Steel | Published material option where stainless fasteners are required. Confirm grade, leg length and availability. |
| Aluminum | Published material option for applications requiring an aluminum staple. Confirm exact size and tool fit. |
Do not assume that every material is available in every leg length or that one material is appropriate for every environment. Include the required material, leg length and tool model in the purchase specification.
The 8006 / 80/06 model identifies the 6mm (1/4") leg-length configuration. If a longer staple is required, select the corresponding 8008, 8010, 8012, 8014 or 8016 size.
Choose the leg length according to the material being attached and the required penetration into the supporting substrate. The shortest staple is not automatically suitable for every light material.
Compare the stapler specification with the published 21GA, 12.8mm crown and 0.90 × 0.70mm wire profile.
A stapler associated with the 80 Series may accept only part of the available leg-length range. Verify the exact tool model before switching from 8006 to a longer size.
If stainless steel or aluminum is required instead of galvanized wire, specify the material together with the exact staple model when requesting a quotation.
Required model: 8006 / 80/06
Required leg length: 6mm / 1/4"
Required material
Required quantity
Stapler brand and exact model
Required crown and wire dimensions
Application and material being fastened
Packaging requirements, if applicable
Delivery destination
The 8006 / 80/06 configuration has a 6mm (1/4") leg length and belongs to the 21 gauge 80 Series fine wire staple family.
KYA publishes a 12.8mm crown, commonly described as a nominal 1/2-inch crown.
The published wire dimensions are 0.90mm wide × 0.70mm thick. KYA also publishes the designation 0.84#.
No. Within common 80 Series naming, 8006 corresponds to the 6mm version. Other lengths use designations such as 8008, 8010, 8012, 8014 and 8016.
Both belong to the 21GA 80 Series profile, but 8006 has a 6mm (1/4") leg while 8010 has a 10mm (3/8") leg.
KYA publishes 125 staples per stick for the galvanized 8006 configuration.
The published packing quantity is 10,000 staples per box.
Not automatically. Compare the stapler's accepted crown, wire profile and leg-length range with the KYA 8006 specification before ordering.
KYA lists BeA 80 as a reference tool family for the 80 Series. Confirm the exact BeA tool model and its accepted staple dimensions before purchasing.
OMER 80 is a useful cross-reference family, but published dimensions can differ between manufacturers. Compare crown, wire dimensions and leg length before substitution.
KYA publishes stainless steel as a material option for the 80 Series. Confirm the required model, material grade and current availability before ordering.
KYA also publishes aluminum as a material option within the 80 Series. Confirm the exact leg length and tool compatibility when requesting the aluminum version.
Typical applications include upholstery, fabric fastening, screening, crafts, light furniture trim and other work where a compatible 6mm fine wire staple is required.
KYA supplies 80 Series fine wire staples for fastener distributors, upholstery suppliers, furniture manufacturers, workshops and professional users. Send the required model, material, stapler model, quantity and delivery destination for product confirmation and quotation.
