KYA supplies 15 degree coil nail screws, also known as coil screw nails or nail-screw hybrid fasteners, for professional wood construction, decking, subflooring, fencing, siding and industrial wood packaging. These threaded fasteners combine pneumatic nailer installation with screw-like fastening characteristics. Selected drive-head designs also allow adjustment or removal after installation.
Our product range includes 15° wire coil nail screws and 15° plastic sheet coil nail screws in different diameters, lengths, thread configurations, drive styles, materials and finishes. Options listed across the range include Torx, Phillips, Square, Pozi and Versa drives, together with galvanized steel and selected stainless steel models.
KYA supplies construction fastener distributors, building material importers, industrial wood product manufacturers and professional contractors. Buyers should select the correct fastener dimensions, collation format and coating according to their application and confirm compatibility with the intended pneumatic coil nailer before ordering.
Coil nail screws are nail-screw hybrid fasteners designed to be driven by compatible pneumatic coil nailers. Unlike conventional loose screws, they are connected in coils for automatic feeding and repeated installation without manually positioning each fastener.
Their threaded shanks engage the substrate to provide resistance to withdrawal. Depending on the head design, an installed nail screw may also be tightened, adjusted or removed using a matching screwdriver bit when the drive recess remains accessible.
Actual fastening performance depends on the thread profile, fastener dimensions, wood species, installation depth, joint design and working conditions. A nail-screw hybrid should not be confused with an ordinary spiral-shank or screw-shank nail that lacks a removable drive head.
KYA offers two principal collation formats within this product category. Both are designed for compatible coil-fed pneumatic fastening equipment, but their carriers and feeding requirements differ.
15° wire coil nail screws use wire-welded collation to connect individual threaded fasteners into a coil. They are intended for compatible wire coil nailers used in repetitive wood fastening operations.
KYA lists wire coil nail screws with several combinations of length, diameter and drive style, including 2-1/4" × .113" Torx models, 2-1/2" × .113" nail screws, 3.05 × 65 mm square-drive models and 3" × .131" Torx-drive versions.
Depending on the model, these fasteners can be considered for subflooring, fencing, timber construction, sheathing, pallets, crates and other wood assemblies. Verify the tool's approved wire collation, magazine capacity, fastener diameter and length before use.
15° plastic sheet coil nail screws use a plastic carrier to hold the threaded fasteners in a coil. This configuration is intended for compatible plastic-sheet coil nailers and must be matched to the equipment's feed mechanism and magazine specifications.
KYA lists galvanized plastic sheet coil nail screws in sizes including 2.1 × 20 mm, 2.1 × 30 mm, 3.5 × 30 mm and 3.5 × 40 mm. Selected Torx-drive stainless steel versions are also available within the product range, including a listed 2.8 × 50 mm model.
These fasteners may be used in compatible wood decking, fencing, siding, panel assembly, outdoor furniture and industrial packaging applications. Select the material and finish according to the environment and project requirements.
The following comparison helps buyers identify the appropriate collation format when sourcing coil nail screws for existing fastening equipment.
| Feature | Wire Coil Nail Screws | Plastic Sheet Coil Nail Screws |
|---|---|---|
| Collation | Wire-welded coil | Plastic sheet coil |
| Listed Angle | 15° | 15° |
| Installation Equipment | Compatible wire coil nailer | Compatible plastic-sheet coil nailer |
| Drive Options | Torx, Phillips, Square, Pozi and Versa options across listed models | Torx and other listed model-specific options |
| Material and Finish | Steel with model-specific finishes | Galvanized steel and selected stainless steel models |
| Typical Applications | Subflooring, fencing, sheathing and wood packaging | Decking, siding, fencing and wood assemblies |
| Compatibility Check | Wire collation, diameter, length, head and magazine | Plastic carrier, diameter, length, head and magazine |
Wire-collated and plastic-sheet-collated nail screws are not automatically interchangeable, even when they share a 15-degree angle and similar fastener dimensions. Check the complete specification and exact nailer model.
KYA lists both imperial and metric sizes to accommodate different purchasing specifications. The following table shows representative coil nail screw products. Select an item to review its individual specifications and request a quotation.
| Product | Size | Collation | Product Details |
|---|---|---|---|
| Torx Head Nail Screws | 2-1/4" × .113" | 15° Wire Coil | View Product |
| Galvanized Torx Nail Screws | 2.1 × 20 mm | 15° Plastic Sheet Coil | View Product |
| Galvanized Coil Nail Screws | 3.5 × 30 mm | 15° Plastic Sheet Coil | View Product |
| Galvanized Coil Nail Screws | 3.5 × 40 mm | 15° Plastic Sheet Coil | View Product |
| Stainless Steel Torx Nail Screws | 2.8 × 50 mm | 15° Plastic Sheet Coil | View Product |
| Wire Coil Nail Screws | 2-1/2" × .113" | 15° Wire Coil | View Product |
These examples do not represent every available combination. Confirm the precise head diameter, thread profile, drive recess, coating, coil count and tool compatibility for the required product.
Different drive configurations serve different fastening and removal requirements. KYA lists several drive styles across its coil nail screw range.
| Drive Type | Description | Selection Considerations |
|---|---|---|
| Torx / Star | Six-lobe drive recess | Use a correctly sized matching bit for adjustment or removal. |
| Phillips | Cross-shaped drive recess | Confirm the recess size and compatible driver. |
| Square | Square drive recess | Match the drive size to the driver bit. |
| Pozi / Pozidriv | Pozidriv-type cross recess | Use the correct Pozidriv driver rather than assuming Phillips compatibility. |
| Versa | Model-specific drive configuration | Confirm the required driver and recess specification. |
Drive availability varies by diameter, length, head design and collation type. For projects requiring future fastener removal, verify that the selected product has a removable drive recess and that the installed head will remain accessible.
Material selection and surface treatment affect corrosion resistance and long-term suitability. KYA's wider coil nail screw range includes steel with different finishes and selected stainless steel configurations.
Galvanized nail screws use a zinc-based protective coating to help reduce corrosion. Depending on the product, finish options may include electro-galvanized, hot-dip galvanized or mechanical galvanized treatments. Buyers should specify the required finish rather than assuming that all galvanized products provide the same corrosion protection.
Selected KYA nail-screw configurations are offered in stainless steel. The product range references 304 and 316 stainless steel options, which should be selected based on exposure conditions, timber compatibility and the project specification.
For coastal, marine or other chloride-exposed locations, additional corrosion-resistance requirements may apply. Confirm the exact stainless grade, product availability and suitability for the intended environment before ordering.
Selected coil nail screws can be used for timber decking and related outdoor wood assemblies. Pneumatic installation supports repetitive fastening, while threaded shanks provide withdrawal resistance. Drive-head configurations that permit removal can help when boards need replacement or adjustment.
For decking, confirm timber species, board thickness, fastener diameter and length, corrosion resistance, head design and the applicable installation requirements.
Coil nail screws may be used in specified subfloor and wood panel assemblies where threaded fastening and pneumatic installation are desirable. Suitable fastener selection depends on the panel material, substrate thickness, penetration depth and approved fastening schedule.
Where structural performance, floor movement or noise reduction is a project consideration, fastener selection and installation must follow the relevant design requirements. Performance should be verified for the actual assembly.
Selected nail screws are suitable for compatible timber fencing, cladding and siding installations. The required head style, thread engagement and protective finish depend on the wood material, exposure conditions and fastening requirements.
Coil nail screws can be considered for wooden pallet, crate and industrial packaging assembly where the joint design allows threaded fasteners installed by pneumatic equipment. Buyers should evaluate joint strength, installation productivity, packaging dimensions and any applicable industry or customer requirements.
Selected nail-screw hybrid fasteners may also be used in benches, timber furniture components and other wooden assemblies. If future repair or disassembly is required, specify an accessible drive recess and confirm removal performance with the actual substrate.
For accurate product selection, evaluate the fastener and fastening equipment as a complete system.
| Specification | What to Confirm |
|---|---|
| Collation Angle | Confirm the listed 15° configuration against the equipment requirements. |
| Collation Type | Select wire coil or plastic sheet coil to match the tool's feeding system. |
| Fastener Diameter | Match the shank diameter and thread geometry to the application and tool specifications. |
| Fastener Length | Consider material thickness, required penetration and allowable tool length. |
| Thread Type | Confirm the thread profile required for the timber and joint design. |
| Head and Drive | Check head dimensions, seating requirements and driver compatibility. |
| Material and Coating | Specify corrosion-resistance requirements for indoor or outdoor installation. |
| Coil Capacity | Confirm the number of fasteners per coil and magazine capacity. |
| Nailer Model | Provide the exact manufacturer and tool model for compatibility review. |
KYA offers coil nail screw products for distributors and industrial buyers sourcing construction fasteners in volume. Packing quantities vary by fastener size and collation configuration.
Selected 15° wire coil products list 250 fasteners per coil for .113" diameter models and 225 fasteners per coil for certain .120" diameter models. Plastic sheet coil quantities also vary by model. The exact coil count, carton quantity and packaging specification should be confirmed during quotation.
When requesting wholesale pricing, provide the following information:
Product name, model number or reference drawing
Fastener diameter and length
Thread, head and drive configuration
15° wire coil or plastic sheet coil format
Material and required surface finish
Coil count and carton packing requirements
Nailer brand and exact model
Application and timber or substrate information
Required order quantity and destination country
For replacement fasteners, supply the existing product specification or sample details to help identify a suitable equivalent. Compatibility and fastening performance should be validated before volume use.
Request a Wholesale Coil Nail Screws Quote
A coil nail screw is a threaded nail-screw hybrid fastener connected in a coil for use with compatible pneumatic coil nailers. It combines rapid collated installation with screw-like thread engagement. Selected drive-head models can also be adjusted or removed after installation.
Coil nail screws use threaded fastener designs and may include a recessed head drive for adjustment or removal. Ordinary coil nails may use smooth, ring or spiral shanks without a screw-drive recess. Their holding characteristics and removability differ according to the specific fastener design.
KYA lists multiple imperial and metric dimensions, including 2-1/4" × .113", 2-1/2" × .113", 2.1 × 20 mm, 2.1 × 30 mm, 2.8 × 50 mm, 3.5 × 30 mm and 3.5 × 40 mm. Available sizes and configurations depend on the individual product.
Yes. KYA coil nail screws are designed for compatible pneumatic coil nailers. Check the collation type, angle, fastener diameter, length, head geometry and magazine requirements. Not every coil nailer is suitable for every nail-screw model.
Only if the specific nailer is approved for both feeding formats and the exact fastener dimensions. Wire coil and plastic sheet coil collation systems are not automatically interchangeable. Refer to the tool manufacturer's specifications.
Selected models feature Torx, Phillips, Square or other suitable drive recesses that allow the fastener to be backed out with a matching driver. Removal depends on the condition and accessibility of the head, thread engagement and surrounding material.
Threaded nail-screw fasteners can provide higher withdrawal resistance than certain comparable smooth-shank nails. However, withdrawal strength, shear behavior and overall joint capacity depend on the specific fasteners, substrates and installation conditions. A universal strength comparison should not be assumed without test data.
Some galvanized configurations may be suitable for specified outdoor applications, but the level of corrosion protection depends on the coating and exposure environment. Buyers should confirm the appropriate galvanized treatment or stainless steel grade for the timber and project requirements.
Yes. KYA lists stainless steel coil nail screw products, including a 15° plastic sheet coil Torx model in 2.8 × 50 mm. The broader product range references 304 and 316 stainless steel options. Confirm the exact grade and availability for the required size before ordering.
Coil capacity varies by diameter, length and collation format. Selected KYA wire coil specifications list 250 fasteners per coil for .113" products and 225 fasteners per coil for certain .120" products. Confirm the exact quantity for the required model.
Selected coil nail screw products can be considered for compatible subfloor, fencing and wood panel applications. Choose the diameter, length, thread, finish and head design according to the substrate, joint design and specified installation requirements.
Provide the required size, thread, head and drive, material, coating, wire or plastic sheet collation, nailer model, quantity, packaging requirements, intended application and destination market. KYA can review the requested specifications and provide product and quotation information.
Contact KYA for Coil Nail Screws
FURNITURE ACCESSORIES
OFFICE SUPPLIES
PACKAGING MATERIAL
