JCF Series Corrugated Fasteners Corrugated Fasteners is widely applied in the corner frame frame connection, the joining together of wood, solid wood furniture tenon reinforcement, crack wood repair purposes.Corrugated nail edge to chisel, and can be easily into the wood, and form a certain Angle between the wave, can put the wood clamping, eliminate the gap, is the other nail could not do it! Corrugated fastener is a thin strip of metal, with a pattern of alternating grooves and one sharp end along its length, used to make wood joints. It’s these grooves that give this fastener is surprisingly high holding power and durability. Mainly used for docking board, splicing, corner connection, such as sofa framework skeleton, real wood door, solid wood, furniture, etc |
| Item: | JCF Series Corrugated Fasteners |
| Thickness: | 0.5mm |
| Crown: | 35mm |
| Material: | Steel Sheet |
| Surface Finishing: | Bright, Galvanized, Phosphate coated. |
Fit tools of HAUBOLD WN25X,and most 35mm crown corrugated tools in the market.
| JCF Type | ||||||
| Item No. | Length (mm) | Height (inch) | Width (mm) | Pcs/Box | Boxes/Ctn | Thickness(mm) |
| JCF12 | 12.2 | 1/2 | 35 | 1000 | 8 | 0.5 |
| JCF15 | 14.4 | 5/8 | 35 | 1000 | 8 | 0.5 |
| JCF18 | 17.4 | 3/4 | 35 | 1000 | 6 | 0.5 |
| JCF25 | 25 | 1 | 35 | 1000 | 6 | 0.5 |
A remedy for damaged adjacent timbers caused by nails or screws.
Versatile for indoor & outdoor mitre joints.
Alternating grooves for strong and hidden holding power.
High rust resistance and retention force.
Complete styles, gauges and sizes are available.
● Cabinet and furniture frames.
● Decking board.
● Real wood door.
● Truss construction.
● Picture frames.
● Wood boxes.
● Upholstery bed frames.
● Repair splits in pallet stringers.
● Windows.
JCF Series Corrugated Fasteners Corrugated Fasteners is widely applied in the corner frame frame connection, the joining together of wood, solid wood furniture tenon reinforcement, crack wood repair purposes.Corrugated nail edge to chisel, and can be easily into the wood, and form a certain Angle between the wave, can put the wood clamping, eliminate the gap, is the other nail could not do it! Corrugated fastener is a thin strip of metal, with a pattern of alternating grooves and one sharp end along its length, used to make wood joints. It’s these grooves that give this fastener is surprisingly high holding power and durability. Mainly used for docking board, splicing, corner connection, such as sofa framework skeleton, real wood door, solid wood, furniture, etc |
| Item: | JCF Series Corrugated Fasteners |
| Thickness: | 0.5mm |
| Crown: | 35mm |
| Material: | Steel Sheet |
| Surface Finishing: | Bright, Galvanized, Phosphate coated. |
Fit tools of HAUBOLD WN25X,and most 35mm crown corrugated tools in the market.
| JCF Type | ||||||
| Item No. | Length (mm) | Height (inch) | Width (mm) | Pcs/Box | Boxes/Ctn | Thickness(mm) |
| JCF12 | 12.2 | 1/2 | 35 | 1000 | 8 | 0.5 |
| JCF15 | 14.4 | 5/8 | 35 | 1000 | 8 | 0.5 |
| JCF18 | 17.4 | 3/4 | 35 | 1000 | 6 | 0.5 |
| JCF25 | 25 | 1 | 35 | 1000 | 6 | 0.5 |
A remedy for damaged adjacent timbers caused by nails or screws.
Versatile for indoor & outdoor mitre joints.
Alternating grooves for strong and hidden holding power.
High rust resistance and retention force.
Complete styles, gauges and sizes are available.
● Cabinet and furniture frames.
● Decking board.
● Real wood door.
● Truss construction.
● Picture frames.
● Wood boxes.
● Upholstery bed frames.
● Repair splits in pallet stringers.
● Windows.
ASIA-PACIFIC SOURCING 2023 
Feicon Batimat 2023
