Home / Wire / Rebar Tie Wire / KYA-210B Automatic Rebar Tier Gun
This product is no longer available
KYA-210B Automatic Rebar Tier Gun
KYA-210B Automatic Rebar Tier Gun KYA-210B Automatic Rebar Tier Gun
KYA-210B Automatic Rebar Tier Gun KYA-210B Automatic Rebar Tier Gun
KYA-210B Automatic Rebar Tier Gun KYA-210B Automatic Rebar Tier Gun

loading

KYA-210B Automatic Rebar Tier Gun

Share to:
sharethis sharing button
The KYA-210B rebar tying tool is lightweight and has a compact, easy to hold grip. The tool is well balanced and is designed to tie rebars as fast as you can pull the trigger. Included with the tool are two lithium-ion batteries. The tool comes with three spools of 21 gauge tie wire.
  • 210B

  • KYA

  • KYA-210B

  • 295mm x 120mm x 275mm

  • 1.8 kgs

  • 6-21mm

  • DC14.4V(4.4AH)

  • Approx .70mins

  • 0.75 seconds

  • Over 2700 knots

  • 100m

  • 0.80mm

  • Approx .195ties(3 wraps)

  • 2 wraps / 3 wraps

  • Rebar Tier Instructions.pdf

Availability:
automatic rebar tier210B automatic rebar tier-7210B rebar tier tool

Product Overview:

KYA-210B Automatic Rebar Tier Tying Machine

The KYA-210B rebar tying tool is lightweight and has a compact, easy to hold grip. The tool is well balanced and is designed to tie rebars as fast as you can pull the trigger. Included with the tool are two lithium-ion batteries. The tool comes with three spools of 21 gauge tie wire. 

● Lightweight and compact body.

● Li-Ion higher capacity battery.

● Brushless twisting motor.

● Reduced tying time.

● Reduce the risk of health problems.

● Simple one-handed operation.

Similar Tool:MAX RB398 Rebar Tier, MAX RB397 Rebar Tier, etc.

Product Description
Model: KYA-210B Automatic Rebar Tier Tying Machine
Air Tool Type: Rebar Tier
Tool Diamensions: 295mmx120mmx275mm
Net Tool Weight: 1.80kgs
Tying Rebar Diameter: 6-21mm
Voltage & Capacity: DC14.4V(4.4AH)
Charge Time: Approx.70mins
Tying Speed Per Knot: 0.75 seconds
Ties Per Charge: Over 2700knots
Length Of Wire Coil: 100M
Diamater Of Wire: 0.80mm
Ties Per Coil: Approx.195ties(3 wraps)
Wraps Per Tie: 2 wraps /3 wraps
Length of Wire For Tying: 380mm/2 wraps
550mm/3 wraps
210B automatic rebar tier-4

210B automatic rebar tier-8

0.80mm Rebar Tying Wire

Length:100m

Tying Strength:0.50KG/CM⊃2;

Tensile Strength:42-47KG/CM⊃2;

Wire Tensile Strength:480m/Pa

Wire Yield Strength:330m/Pa

Elongation:17%

Material Code:Q195 Galvanized Wire

Net weight:0.4kg/reel

rebar tie wire

Features

 Ergonomic rubberized soft handle for increased comfort.

 Make ties in under 1 second 2-mode operation provides 2 or 3 wraps.

 Fast and easy-load wire reel loading with protective cover.

 Brushless Motor eliminates carbon brushes, enabling run cooler , efficiently for longer life.

 Delivers up to 130 ties per wire reel allowing for maximum productivity.

 Trigger power switch with lock-off feature requires two actions to power the tool.

 Ergonomic rubberized soft handle for increased comfort Weighs only 4.19 lbs.

 With battery for reduced operator fatigue.

Application

Delivered a cordless tying solution for rebar and steel rod.automatic rebar tier tying machine

Our Services
No Normal Common   faults Warning   voice Possible   reason Inspecting   items Solution
1 Power ON The Tip
    Axis is initialized
    and the wire-cutter
    operates
    automatically.
No operation   takes
    place
No sound   emitted Battery   completely empty Confirm   the battery is charged. Perform   normal charge.
Electrode plate has been oxidized Take   out the battery and see if the
    electrode has been brown.
Polish   terminal part of battery pack with dry cloth, etc
Continuous short beeps(Pi,pi,pi…) Curl   guide is open Open/close   curl guide. Fully   close curl guide.
Binding wire has been entangled around Twist section. Turn   off power and take out the battery to confirm if binding wire has been   entangled inside curl guide. Turn   off power, remove binding wire inside curl guide
Two long beeps Battery   Is empty Confirm   the battery is charged Perform   normal charge
2 Trigger ON
   
Wire is sent out.
No wire is sent out Continuous short Curl guide is open Open/close curl guide Fully close curl guide
Three   short beeps
    repeated(Pi,pi,pi,Pi,pi,pi,
    …)
Tie-wire has been run out Check if the Tie-wire has been run Set the new tie wire
Wire caught inside reel Check if wire inside reel has been loosened and   caught Remove fray on reel
Cutter section is blocked with   foreign substance Confirm functioning of Cutter section Either wipe Cutter section with dry cloth or   blow it with air
A wire is caught in the cutter   section or Wire guide A Check if any wire is caught. Diassemble the cutter section and remove the   caught wire
3 Binding   wire draws a circle. Curl is disordered and steps out of curl No sound emitted Wire, by hitting reinforcing bars, was repelled check if wire hits reinforcing bars at binding Pay attention so that wire does not hit   reinforcing bars at binding
4 Wire   is subject to
    cutting
No wire cutting takes
    place.
No sound emitted Cutter section is blocked with foreign
    substance
Confirm function of Cutter section. Either wipe Cutter section with dry cloth or   blow it with air
5 Wire twisting
    takes place
Wire gets
    entangled
No sound emitted Wire, by hitting reinforcing bars,was repelled Check if wire hits reinforcing bars at binding Pay attention so that wire does not hit   reinforcing bars at binding.
Binding   power is week No sound emitted Reinforcing bars is not of designated size. Confirm size of reinforcing bars to be bound Use approriate diameter scope
Erroneous handling such as   improper application of machine Confirm how to apply machine to reinforcing   bars Adjust the Torque to a higher lever and insert   in vertical direction. Use as tilting at45°
Twisting-off   takes
    place
No sound emitted Reinforcing bars is not of
    designated size
Confirm size of reinforcing bars to be bound Use approriate diameter scope
Erroneous handling such as   improper application of machine Confirm how to apply machine to   reinforcing
    bars
Adjust the Torque to a lower lever and insert   in vertical direction. Use as tilting at45°
Works   properly Two long beeps repeated(Pi-pi, pi-pi,...) Low power remains in the battery pack Confirm the battery is fully charged. Perform normal charge
Four short beeps   repeated(Pipipipi,
    Pipipipi,…)
The tool is used at high temperature. Check the temperature at the job site. Leave the tool and the battery pack at normal   temperature in the room for some time. and then continue the operation.


Previous: 
Next: 
Apply Our Best Quotation

TOOLS

FASTENERS

FURNITURE ACCESSORIES

OFFICE SUPPLIES

PACKAGING MATERIAL

WIRE

QUICK LINKS

Copyright ©  2024 Changzhou KYA Fasteners Co.,Ltd. All rights reserved.