This Rebar-tier featuring new mechanisms which make it the most efficient rebar tying tool on the market. In addition, This tying tool weighs in at only 2.3kgs making it light weight as well. With an included belt hook reinforcement workers easily can move around and carry the tool with less operator fatigue. The KYA-460 is designed with durability and efficiency in mind. Easily load dual tie wire coils with the quick load magazine design. With an easy push gear release you are able to quickly feed wire when loading the tool. After that, the dual wire feeding mechanism of the KYA-460 helps complete each tie in about a half second. As a result of the faster speeds you spend less man hours per job. In addition, the large jaw of the TwinTier ties rebar sizes up to #7 x #7 with 19 gauge wire and the thinner arm allows for tight ties at 45 degrees. Finally, an enclosed design provides greater protection against dust and debris getting in the tool.
Shorter Tie Height:
Last but not least, the shorter tie height of the KYA-460 means that you need less concrete to fully cover your tie wire. Each tie is about 50% shorter than previous models.
1) One hand operation-easy to handle
2) Faster than normal tying machine, shorten tie height, cost savings
3) 18V Li-ion higher capacity battery
4) Brushless twisting motor-long service life
5) Light weight & compact body
6) 1.0mm twin wires
Similar Tool:MAX RB441T Rebar Tier.
| Automatic rebar tying machine | ||
| Model No. | KYA-460(Li-ion) | KYA-660B(Li-ion) |
| Max Tying Diameter | 46mm | 66mm |
| Voltage & Capacity | DC18V(5.0AH) | DC18V(5.0AH) |
| Charge Time | Approx.70mins | Approx.70mins |
| Tying speed per knot | 0.6 seconds | 0.6 seconds |
| Ties per Charge | Over 4600ties | Over 4600 ties |
| Ties per Coil | Approx. 260ties(1turn) | Approx.260ties(1turns) |
| Turns per Tie | 1 turn | 1 turn |
| Wire Type | 1.0mm Black annealed wire or Galvanized wire | 1.0mm Black annealed wire or Galvanized wire |
| Net Weight | 2.3kgs | 2.3kgs |
| Dimension(L)X(W)X(H) | 350mmX120mmX300mm | 350mmX120mmX300mm |
Rebar Tying Wire 1.0mm
The KYA TwinTier completes about 4000 ties per charge with a full charge completed in 70 minutes.
Double Tying Speed increases productivity.
Cost Saving – Mechanism dispenses precise amount of wire.
Shorter Tie Height.
Large Jaw – up to #7 x #7 rebar.
Long Battery Life up to 4,000 ties.
Easy Push Gear Release.
Fast Load Wire.
Precast Plants.
Road and Bridge Construction.
Tilt-Up Concrete Walls.
Concrete Foundations.
Retaining Walls.
Electrical Conduits.
Swimming Pools.
This Rebar-tier featuring new mechanisms which make it the most efficient rebar tying tool on the market. In addition, This tying tool weighs in at only 2.3kgs making it light weight as well. With an included belt hook reinforcement workers easily can move around and carry the tool with less operator fatigue. The KYA-460 is designed with durability and efficiency in mind. Easily load dual tie wire coils with the quick load magazine design. With an easy push gear release you are able to quickly feed wire when loading the tool. After that, the dual wire feeding mechanism of the KYA-460 helps complete each tie in about a half second. As a result of the faster speeds you spend less man hours per job. In addition, the large jaw of the TwinTier ties rebar sizes up to #7 x #7 with 19 gauge wire and the thinner arm allows for tight ties at 45 degrees. Finally, an enclosed design provides greater protection against dust and debris getting in the tool.
Shorter Tie Height:
Last but not least, the shorter tie height of the KYA-460 means that you need less concrete to fully cover your tie wire. Each tie is about 50% shorter than previous models.
1) One hand operation-easy to handle
2) Faster than normal tying machine, shorten tie height, cost savings
3) 18V Li-ion higher capacity battery
4) Brushless twisting motor-long service life
5) Light weight & compact body
6) 1.0mm twin wires
Similar Tool:MAX RB441T Rebar Tier.
| Automatic rebar tying machine | ||
| Model No. | KYA-460(Li-ion) | KYA-660B(Li-ion) |
| Max Tying Diameter | 46mm | 66mm |
| Voltage & Capacity | DC18V(5.0AH) | DC18V(5.0AH) |
| Charge Time | Approx.70mins | Approx.70mins |
| Tying speed per knot | 0.6 seconds | 0.6 seconds |
| Ties per Charge | Over 4600ties | Over 4600 ties |
| Ties per Coil | Approx. 260ties(1turn) | Approx.260ties(1turns) |
| Turns per Tie | 1 turn | 1 turn |
| Wire Type | 1.0mm Black annealed wire or Galvanized wire | 1.0mm Black annealed wire or Galvanized wire |
| Net Weight | 2.3kgs | 2.3kgs |
| Dimension(L)X(W)X(H) | 350mmX120mmX300mm | 350mmX120mmX300mm |
Rebar Tying Wire 1.0mm
The KYA TwinTier completes about 4000 ties per charge with a full charge completed in 70 minutes.
Double Tying Speed increases productivity.
Cost Saving – Mechanism dispenses precise amount of wire.
Shorter Tie Height.
Large Jaw – up to #7 x #7 rebar.
Long Battery Life up to 4,000 ties.
Easy Push Gear Release.
Fast Load Wire.
Precast Plants.
Road and Bridge Construction.
Tilt-Up Concrete Walls.
Concrete Foundations.
Retaining Walls.
Electrical Conduits.
Swimming Pools.
