This Rebar-tier featuring new mechanisms which make it the most efficient rebar tying tool on the market. In addition, This tying tool weighs in at only 2.3kgs making it light weight as well. With an included belt hook reinforcement workers easily can move around and carry the tool with less operator fatigue. The KYA-660B is designed with durability and efficiency in mind. Easily load dual tie wire coils with the quick load magazine design. With an easy push gear release you are able to quickly feed wire when loading the tool. After that, the dual wire feeding mechanism of the KYA-660B helps complete each tie in about a half second. As a result of the faster speeds you spend less man hours per job. In addition, the large jaw of the TwinTier ties rebar sizes up to #7 x #7 with 19 gauge wire and the thinner arm allows for tight ties at 45 degrees. Finally, an enclosed design provides greater protection against dust and debris getting in the tool.
Shorter Tie Height:
Last but not least, the shorter tie height of the KYA-660B means that you need less concrete to fully cover your tie wire. Each tie is about 50% shorter than previous models.
1) One hand operation-easy to handle
2) Faster than normal tying machine, shorten tie height, cost savings
3) 18V Li-ion higher capacity battery
4) Brushless twisting motor-long service life
5) Light weight & compact body
6) 1.0mm twin wires
Similar Tool:MAX RB611T Rebar Tier.
| Automatic rebar tying machine | ||
| Model No. | KYA-460(Li-ion) | KYA-660B(Li-ion) |
| Max Tying Diameter | 46mm | 66mm |
| Voltage & Capacity | DC18V(5.0AH) | DC18V(5.0AH) |
| Charge Time | Approx.70mins | Approx.70mins |
| Tying speed per knot | 0.6 seconds | 0.6 seconds |
| Ties per Charge | Over 4600ties | Over 4600 ties |
| Ties per Coil | Approx. 260ties(1turn) | Approx.260ties(1turns) |
| Turns per Tie | 1 turn | 1 turn |
| Wire Type | 1.0mm Black annealed wire or Galvanized wire | 1.0mm Black annealed wire or Galvanized wire |
| Net Weight | 2.3kgs | 2.3kgs |
| Dimension(L)X(W)X(H) | 350mmX120mmX300mm | 350mmX120mmX300mm |
Rebar Tying Wire 1.0mm
The KYA TwinTier completes about 4000 ties per charge with a full charge completed in 70 minutes.
DOUBLE THE SPEED
WIder range to tie from 16mm x 16mm to 38mm x 16mm x 16mm. The Dual Wire Feeding Mechanism increases productivity.
COST SAVINGS
The Wire Pull Back Mechanism dispenses the precise amount of wire needed to form a tie reducing wire usage.
THE TWINTIER
The TwinTier can tie 4000 ties per battery charge and up to 240 ties per coil of wire (on 13mm x 13mm rebar).
SHORTER TIE HEIGHT
The TwinTier's Wire Bending Mechanism produces a shorter tie height. Less concrete is needed to fully cover a wire tie.
A LARGE JAW
A large jaw enables the TwinTier to tie up to a 32mm x 29mm rebar.
SLIM ARM FITS
Slim arm fits easily at a 45 degree angle for tight ties.
AN EASY PUSH GEAR
An easy push gear release effortlessly opens gears to quickly feed wire when loading the tool.
Precast Plants.
Road and Bridge Construction.
Tilt-Up Concrete Walls.
Concrete Foundations.
Retaining Walls.
Electrical Conduits.
Swimming Pools.
This Rebar-tier featuring new mechanisms which make it the most efficient rebar tying tool on the market. In addition, This tying tool weighs in at only 2.3kgs making it light weight as well. With an included belt hook reinforcement workers easily can move around and carry the tool with less operator fatigue. The KYA-660B is designed with durability and efficiency in mind. Easily load dual tie wire coils with the quick load magazine design. With an easy push gear release you are able to quickly feed wire when loading the tool. After that, the dual wire feeding mechanism of the KYA-660B helps complete each tie in about a half second. As a result of the faster speeds you spend less man hours per job. In addition, the large jaw of the TwinTier ties rebar sizes up to #7 x #7 with 19 gauge wire and the thinner arm allows for tight ties at 45 degrees. Finally, an enclosed design provides greater protection against dust and debris getting in the tool.
Shorter Tie Height:
Last but not least, the shorter tie height of the KYA-660B means that you need less concrete to fully cover your tie wire. Each tie is about 50% shorter than previous models.
1) One hand operation-easy to handle
2) Faster than normal tying machine, shorten tie height, cost savings
3) 18V Li-ion higher capacity battery
4) Brushless twisting motor-long service life
5) Light weight & compact body
6) 1.0mm twin wires
Similar Tool:MAX RB611T Rebar Tier.
| Automatic rebar tying machine | ||
| Model No. | KYA-460(Li-ion) | KYA-660B(Li-ion) |
| Max Tying Diameter | 46mm | 66mm |
| Voltage & Capacity | DC18V(5.0AH) | DC18V(5.0AH) |
| Charge Time | Approx.70mins | Approx.70mins |
| Tying speed per knot | 0.6 seconds | 0.6 seconds |
| Ties per Charge | Over 4600ties | Over 4600 ties |
| Ties per Coil | Approx. 260ties(1turn) | Approx.260ties(1turns) |
| Turns per Tie | 1 turn | 1 turn |
| Wire Type | 1.0mm Black annealed wire or Galvanized wire | 1.0mm Black annealed wire or Galvanized wire |
| Net Weight | 2.3kgs | 2.3kgs |
| Dimension(L)X(W)X(H) | 350mmX120mmX300mm | 350mmX120mmX300mm |
Rebar Tying Wire 1.0mm
The KYA TwinTier completes about 4000 ties per charge with a full charge completed in 70 minutes.
DOUBLE THE SPEED
WIder range to tie from 16mm x 16mm to 38mm x 16mm x 16mm. The Dual Wire Feeding Mechanism increases productivity.
COST SAVINGS
The Wire Pull Back Mechanism dispenses the precise amount of wire needed to form a tie reducing wire usage.
THE TWINTIER
The TwinTier can tie 4000 ties per battery charge and up to 240 ties per coil of wire (on 13mm x 13mm rebar).
SHORTER TIE HEIGHT
The TwinTier's Wire Bending Mechanism produces a shorter tie height. Less concrete is needed to fully cover a wire tie.
A LARGE JAW
A large jaw enables the TwinTier to tie up to a 32mm x 29mm rebar.
SLIM ARM FITS
Slim arm fits easily at a 45 degree angle for tight ties.
AN EASY PUSH GEAR
An easy push gear release effortlessly opens gears to quickly feed wire when loading the tool.
Precast Plants.
Road and Bridge Construction.
Tilt-Up Concrete Walls.
Concrete Foundations.
Retaining Walls.
Electrical Conduits.
Swimming Pools.
