15 Degree Galvanized Plastic Sheet Coil Nail Screw 3.5x40mm

Product Description

Overview



15 Degree Galvanized Plastic Sheet Coil Nail Screw 3.5x40mm



Twice as fast as ordinary collated screws

● Can be used in most popular nailers

● Compatable with Bostitch, Hitachi, Senco

● Fine thread or Coarse Threaded.

● Can be used for very many different applications, both outdoors and indoors, due to the residue-free processing.


Product Description

15 Degree Galvanized Plastic Sheet Coil Nail Screw 3.5x40mm


Collation type: Plastic Sheet Coil
Inner diameter: 2.5 - 3.2 mm | 0.099 - 0.126"
Outer diameter: 2.8 - 3.9 mm | 0.113 - 0.153"
Length: 25 - 90 mm | 1 - 3 1/2"
Thread type: Fine Thread, Coarse Thread, Steelthread,
Surface treatment : Electro galvanized,Hot dip galvanized,Bright,Mechanical galvanized
Drive type phillips®, pozi (Pozidriv®), Torx®, square, versa
Coil capacity : 200 - 325
Material : Standard steel, Stainless Steel 304 / A2, Stainless Steel 316 / A4
Collation degrees : 0° & 15°

Screw Head

Screw Point

Screw Shank


These fasteners come in five different styles:



Features


Speed and Flexibilit

Improve work efficiency with Screw fasteners. These products perform two times quicker than collated screws and eight times faster than bulk screws. Because they work with existing pneumatic nailers, you don't have to invest in new equipment to enjoy their efficient functionality.


In addition, Screws fasteners aren't just quickly driven; they're adjustable and removable after you place them. Unlike collated screws, you get reliable flexibility that's suited to a wide array of applications.

Application

  • Commercial metal roofing

  • Residential roofing

  • Siding installation

  • Subflooring

  • Pallet and crate construction

  • Fencing

  • Outdoor furniture assembly and more

  • Screws are more dependable than other screws. Their holding power gives you greater peace of mind than you'd enjoy with other less powerful fasteners.

Finishing

Bright Finish

Bright fasteners have no coating to protect the steel and are susceptible to corrosion if exposed to high humidity or water. They are not recommended for exterior use or in treated lumber, and only for interior applications where no corrosion protection is needed. Bright fasteners are often used for interior framing, trim and finish applications.


Hot Dip Galvanized (HDG)

Hot dip galvanized fasteners are coated with a layer of Zinc to help protect the steel from corroding. Although hot dip galvanized fasteners will corrode over time as the coating wears, they are generally good for the lifetime of the application. Hot dip galvanized fasteners are generally used for outdoor applications where the fastener is exposed to daily weather conditions such as rain and snow. Areas near the coasts where the salt content in rain water is much higher, should consider Stainless Steel fasteners as salt accelerates the deterioration of the galvanization and will accelerate corrosion. 


Electro Galvanized (EG)

Electro Galvanized fasteners have a very thin layer of Zinc that offers some corrosion protection. They are generally used in areas where minimal corrosion protection is needed such as bathrooms, kitchens and other areas that are susceptible to some water or humidity. Roofing nails are electro galvanized because they are generally replaced before the fastener begins to wear and are not exposed to harsh weather conditions if installed properly. Areas near the coasts where salt content in rain water is higher should consider a Hot Dip Galvanized or Stainless Steel fastener. 


Stainless Steel (SS)

Stainless steel fasteners offer the best corrosion protection available. The steel may oxidize or rust over time but it will never lose its strength from corrosion. Stainless Steel fasteners can be used for exterior or interior applications and generally come in 304 or 316 stainless steel. 


2 in. x .099 in. 15° Wire Coil Square Head Collated Nail Screw

2-1/4 in. x .120 in. 15° Wire Coil Torx Head Nail Screw

15 Degree Wire Coil Philips Head Nail Screw

3" x .113" 15 Degree Wire Coil Philips Head Screw Nails

1-3/8" x .113" 15 Degree Wire Coil Philips Head Screw Nails

1-1/2" x .120" 15 Degree Wire Coil Philips Head Screw Nails

15 Degree Stainless Steel Plastic Self Tapping Screws Phillips Head

15 Degree Aluminum Plastic Coil Nails Smooth Shank 2.4x50mm

15 Degree Stainless Steel Plastic Coil Nails Ring Shank 2.5x40mm

15 Degree Galvanized Plastic Sheet Coil Nail Screw 3.5x30mm