| Material: | |
|---|---|
| Surface Treatment: | |
| Quantity: | |
Plastic collated coil nails, also known as plastic sheet coil nails, are most commonly used for outdoor work such as siding, subfloors, and roof sheathing. During nailing, the nails are easily detached from the plastic strip connecting them, so the direction of nailing remains unchanged. Working with such nails becomes much simpler and cleaner because there are no extra scraps of plastic left. Such a coil can typically hold from 50 to 300 nails.
Plastic sheet collated nails can be angled at 0° or 15°, counterclockwise or clockwise, upon customer request.These nails redefine durability. Collated with a strong, flexible plastic, they effortlessly adapt to the demands of your projects, ensuring every nailing operation is a success. With on-center nail heads that reduce jamming and amplify drivability, these nails are built to keep you productive.
High grade corrosion resistant nail to use in soft wood and non-treated applications;
Virgin plastic sheet collation process;
Available in 0 and 15 degree in plastic coils.
NAIL POINT
NAIL SHANK
NAIL HEAD
Nail Point:
- Diamond 34°~66°
- Clinch
- Round
- Chisel Blunt
- Blunt
Nail Shank:
- Smooth
- Screw
- Ring
Nail Degree
- 0 degree in plastic coils
- 15 degree in plastic coils
Stainless Steel Nails
• The highest durable nail in all climate conditions, especially in humid environments;
• Available in 304 and 316 grades and in many collated formats.
Hot Dip Galvanized Nails
• Highly resistant to corrosion from the zinc immersion, high temperature molten process
Electro Galvanized Nails
• Electro Galvanized have a layer of Zinc that offers some corrosion protection.
Aluminum Nails
• High grade corrosion resistant nail to use in soft wood and non-treated applications;
• Virgin plastic sheet collation process.
Bright Nails
• Bright fasteners have no coating to protect the steel and are susceptible to corrosion if exposed to high humidity or water.
• They are not recommended for exterior use or in treated lumber, and only for interior applications where no corrosion
protection is needed.
#45 steel electro galvanized
• The nails have high hardness and can penetrate 2mm steel plate.
• Electro galvanized finish helps resist corrosion and rust.
• Siding
• Fencing
• Crate
• Decking
• Sheathing
Nails can be seen as a commodity but they are not. The selection must be thoughtful to make sure that the selected nails correspond well to the type of work or type of wood and the climate environment.
Nails need to be reliable, precise, durable and rust free. The perfect nail needs to have all of its three parts, heads, shanks and points, well designed and well integrated.
KYA Fasteners manufactures its nails with a craftsmanship mindset and the best design and quality to reach high precision nails and to surpass the usual standards with durable nails.
KYA Fasteners produces stainless steel, aluminum, hot dipped galvanized nails and bright nails. With the choices of degrees, finishes, points and shanks,
KYA Fasteners offers a wide range of products and options.
Stainless Steel Nails
- The highest durable nail in all climate conditions, especially in humid environments;
- Increase substantially time life of fences, sidings and all woodwork whether treated or non- treated wood;
- High grade corrosion-resistant material;
- Available in packages of 10 lbs to 2000 lbs in bulk in 304 and 316 grades and in many collated formats.
Hot Dip Galvanized Nails
- Meet ASTM A 153 Class D;
- Highly resistant to corrosion from the zinc immersion, high temperature molten process;
- Recommended for exterior wood construction;
- Available in all formats of collated as well as bulk.
Aluminum Nails
- High grade corrosion resistant nail to use in soft wood and non-treated applications;
- Virgin plastic sheet collation process;
- Available in 0 and 15 degree in plastic coils.
Bright Nails
- Available in diameters from .080 “ to 0.148 “ and from1 ½ “ to 4 “ in both collated and bulk.
Plastic collated coil nails, also known as plastic sheet coil nails, are most commonly used for outdoor work such as siding, subfloors, and roof sheathing. During nailing, the nails are easily detached from the plastic strip connecting them, so the direction of nailing remains unchanged. Working with such nails becomes much simpler and cleaner because there are no extra scraps of plastic left. Such a coil can typically hold from 50 to 300 nails.
Plastic sheet collated nails can be angled at 0° or 15°, counterclockwise or clockwise, upon customer request.These nails redefine durability. Collated with a strong, flexible plastic, they effortlessly adapt to the demands of your projects, ensuring every nailing operation is a success. With on-center nail heads that reduce jamming and amplify drivability, these nails are built to keep you productive.
High grade corrosion resistant nail to use in soft wood and non-treated applications;
Virgin plastic sheet collation process;
Available in 0 and 15 degree in plastic coils.
NAIL POINT
NAIL SHANK
NAIL HEAD
Nail Point:
- Diamond 34°~66°
- Clinch
- Round
- Chisel Blunt
- Blunt
Nail Shank:
- Smooth
- Screw
- Ring
Nail Degree
- 0 degree in plastic coils
- 15 degree in plastic coils
Stainless Steel Nails
• The highest durable nail in all climate conditions, especially in humid environments;
• Available in 304 and 316 grades and in many collated formats.
Hot Dip Galvanized Nails
• Highly resistant to corrosion from the zinc immersion, high temperature molten process
Electro Galvanized Nails
• Electro Galvanized have a layer of Zinc that offers some corrosion protection.
Aluminum Nails
• High grade corrosion resistant nail to use in soft wood and non-treated applications;
• Virgin plastic sheet collation process.
Bright Nails
• Bright fasteners have no coating to protect the steel and are susceptible to corrosion if exposed to high humidity or water.
• They are not recommended for exterior use or in treated lumber, and only for interior applications where no corrosion
protection is needed.
#45 steel electro galvanized
• The nails have high hardness and can penetrate 2mm steel plate.
• Electro galvanized finish helps resist corrosion and rust.
• Siding
• Fencing
• Crate
• Decking
• Sheathing
Nails can be seen as a commodity but they are not. The selection must be thoughtful to make sure that the selected nails correspond well to the type of work or type of wood and the climate environment.
Nails need to be reliable, precise, durable and rust free. The perfect nail needs to have all of its three parts, heads, shanks and points, well designed and well integrated.
KYA Fasteners manufactures its nails with a craftsmanship mindset and the best design and quality to reach high precision nails and to surpass the usual standards with durable nails.
KYA Fasteners produces stainless steel, aluminum, hot dipped galvanized nails and bright nails. With the choices of degrees, finishes, points and shanks,
KYA Fasteners offers a wide range of products and options.
Stainless Steel Nails
- The highest durable nail in all climate conditions, especially in humid environments;
- Increase substantially time life of fences, sidings and all woodwork whether treated or non- treated wood;
- High grade corrosion-resistant material;
- Available in packages of 10 lbs to 2000 lbs in bulk in 304 and 316 grades and in many collated formats.
Hot Dip Galvanized Nails
- Meet ASTM A 153 Class D;
- Highly resistant to corrosion from the zinc immersion, high temperature molten process;
- Recommended for exterior wood construction;
- Available in all formats of collated as well as bulk.
Aluminum Nails
- High grade corrosion resistant nail to use in soft wood and non-treated applications;
- Virgin plastic sheet collation process;
- Available in 0 and 15 degree in plastic coils.
Bright Nails
- Available in diameters from .080 “ to 0.148 “ and from1 ½ “ to 4 “ in both collated and bulk.
