15 Degree Coil Roofing Nails 1-1/2 in. x 0.120 in. are wire-collated roofing nails designed for asphalt shingles, fiberglass shingles, composition roofing, waterproof tar paper, roofing felt, underlayments, insulation board, siding and sheathing. With a 1-1/2 inch / 38mm length and 0.120 inch / 3.05mm shank diameter, these nails provide reliable fastening performance for professional roofing and exterior construction applications.
These smooth shank electro-galvanized coil roofing nails are designed for compatible 15 degree coil roofing nailers. The wire-collated coil format supports fast loading and continuous fastening, while the smooth shank allows efficient driving in roofing materials and soft construction substrates. For harsher outdoor environments, hot dip galvanized and stainless steel options are available.
1-1/2 inch / 38mm length and 0.120 inch / 3.05mm diameter for secure roofing fastening.
15 degree wire-collated format for compatible coil roofing nailers.
Smooth shank design supports fast driving in shingles, underlayments, siding and soft materials.
Electro-galvanized finish provides basic corrosion resistance for roofing applications.
Suitable for asphalt shingles, fiberglass shingles, roofing felt, tar paper and insulation board.
Available in electro-galvanized, hot dip galvanized and stainless steel options.
Smooth and ring shank options are available for different holding power requirements.
Bulk packing supports roofing contractors, distributors, wholesalers and importers.
| Specification | Details |
|---|---|
| Product Name | 15 Degree Coil Roofing Nails 1-1/2 in. x 0.120 in. |
| Fastener Type | Wire Collated Coil Roofing Nails |
| Degree | 15 Degree |
| Material | Steel |
| Diameter | 0.120 inch / 3.05mm |
| Length | 1-1/2 inch / 38mm |
| Shank Type | Smooth Shank |
| Finish | Electro-Galvanized |
| Collation | Wire Collated |
| Compatible Tools | Compatible 15 degree coil roofing nailers. Confirm nail length, shank diameter, collation and magazine specification before ordering. |
| Main Applications | Composition roofing, asphalt shingles, fiberglass shingles, underlayments, roofing felt, waterproof tar paper, siding, framing, sheathing and insulation board |
| Finish | Length inch | Shank Type | Pcs/Box M |
|---|---|---|---|
| Electro-Galvanized | 3/4, 7/8, 1, 1-1/4, 1-1/2, 1-3/4 | Smooth | 7.2 |
| Electro-Galvanized | 3/4, 1-1/4, 1-1/2 | Ring | 7.2 |
| Hot Dip Galvanized | 1, 1-1/4, 1-1/2, 1-3/4 | Smooth | 7.2 |
| Stainless Steel 304 | 3/4, 7/8, 1, 1-1/4, 1-1/2, 1-3/4 | Smooth | 3.6, 7.2 |
| Stainless Steel 316 | 3/4, 7/8, 1, 1-1/4, 1-1/2, 1-3/4 | Ring | 3.6 |
These 15 Degree Coil Roofing Nails are optimized for roofing and soft material fastening. Contact KYA Fasteners for bulk orders, custom specifications, different finishes, shank options and private-label packaging.
| Shank Type | Recommended Use | Main Benefit |
|---|---|---|
| Smooth Shank | Composition roofing, shingles, underlayments, tar paper, roofing felt and siding. | Fast driving and efficient installation in soft roofing materials. |
| Ring Shank | High-wind areas, stronger hold requirements, sheathing and selected exterior fastening. | Improved pull-out resistance and stronger holding power. |
| Screw Shank | Hard wood or dense construction materials where stronger grip is required. | Creates tighter grip and helps resist loosening. |
| Annular Thread Shank | Wood panels, sheetrock and selected board fastening applications. | Helps reduce pull-out and improves holding strength. |
| Finish | Recommended Use |
|---|---|
| Bright Finish | Dry indoor or temporary applications where corrosion resistance is not required. |
| Electro-Galvanized EG | General roofing and siding applications requiring basic zinc protection. |
| Hot Dip Galvanized HDG | Outdoor roofing, siding and weather-exposed construction applications. |
| Stainless Steel 304 / 316 | Coastal, humid, high-salt and high-corrosion environments. |
1-1/2 inch x 0.120 inch coil roofing nails are commonly used in roofing jobs that require longer penetration than 1 inch or 1-1/4 inch nails. They are suitable for shingle roofing, re-roofing, insulation board fastening and soft material fastening where tool compatibility and project specifications allow this size.
Asphalt shingles and fiberglass shingles
Composition roofing and new roof installation
Re-roofing and roof repair work
Waterproof tar paper and roofing felt
Underlayments and insulation board
Siding and exterior soft material fastening
Wood or vinyl framing and sheathing applications
| Buyer Concern | Recommended Check |
|---|---|
| Nailer Compatibility | Confirm the tool accepts 15 degree wire-collated coil roofing nails with 0.120 inch diameter and 1-1/2 inch length. |
| Nail Length | Use 1-1/2 inch nails when deeper penetration is required by roofing materials or project specifications. |
| Shank Type | Choose smooth shank for fast general roofing installation and ring shank when stronger pull-out resistance is required. |
| Finish Selection | Use EG for general roofing, HDG for stronger outdoor corrosion protection and stainless steel for coastal or high-corrosion areas. |
| Application Test | Test feeding, penetration, holding power and surface finish on shingles, underlayments, insulation board or siding before bulk purchase. |
| Bulk Order | Confirm size, finish, shank type, pcs/box, carton packing, pallet packing, lead time and private-label requirements. |
| Finish | Corrosion Protection | Best Use |
|---|---|---|
| Electro-Galvanized | Basic zinc protection. | General roofing and light exposure applications. |
| Hot Dip Galvanized | Stronger zinc coating for outdoor exposure. | Weather-exposed roofing, siding and exterior fastening. |
| Stainless Steel 304 | High corrosion resistance. | Humid exterior areas and long-service roofing projects. |
| Stainless Steel 316 | Best corrosion resistance among listed options. | Coastal, salt-air and harsh corrosion environments. |
KYA Fasteners supplies coil roofing nails, roofing nails, wire coil nails, siding nails, staples, brad nails and industrial fasteners for global buyers. For roofing contractors, construction distributors, importers, wholesalers and OEM packaging buyers, KYA can support nail size selection, finish selection, shank selection, compatible tool confirmation and export supply.
Factory supply for 15 degree coil roofing nails 1-1/2 in. x 0.120 in.
Smooth shank and ring shank roofing nail options available.
Electro-galvanized, hot dip galvanized and stainless steel options available.
Bulk order support for roofing, re-roofing, underlayment, siding and sheathing applications.
Custom carton packing, pallet packing and private-label packaging available for distributors.
They are used for asphalt shingles, fiberglass shingles, composition roofing, waterproof tar paper, roofing felt, underlayments, siding, framing, sheathing and insulation board.
This product is 1-1/2 inch / 38mm long with a 0.120 inch / 3.05mm shank diameter.
These nails are designed for compatible 15 degree coil roofing nailers. Buyers should confirm collation angle, wire collation, nail length and shank diameter before ordering.
1-1/2 inch roofing nails are used when deeper penetration is required by shingles, insulation board, underlayment or project specifications.
Electro-galvanized nails provide basic corrosion resistance. For stronger outdoor protection, hot dip galvanized nails are recommended. For coastal or high-salt areas, stainless steel roofing nails are recommended.
Smooth shank nails are fast to drive and suitable for general roofing. Ring shank nails provide stronger pull-out resistance and are useful where higher holding power is required.
Yes. They can be used for re-roofing when the nail length, finish, shank type and local project requirements are suitable for the roof assembly.
Yes. KYA can supply different lengths, shank types, finishes, carton packing, pallet packing and private-label packaging for bulk roofing nail orders.
