| Quantity: | |
|---|---|
15 Degree Galvanized Screw Shank Coil Siding Nails 2-1/4 Inch x .099 are wire-collated full round head nails designed for siding, sheathing, fencing, framing, fiber cement board, underlayment, cabinet frames and furniture frame applications. The 2-1/4 inch / 57mm length and .099 inch / 2.5mm diameter provide reliable fastening strength for exterior and construction materials.
These 15 degree coil siding nails are made from carbon steel with an electro-galvanized finish. The screw shank improves grip in harder woods and dense materials, while the wire-collated coil format supports efficient loading in compatible 15 degree coil nailers. For outdoor, humid or coastal environments, hot dip galvanized or stainless steel options can also be selected according to project requirements.
2-1/4 inch / 57mm length and .099 inch / 2.5mm diameter for siding and construction fastening.
Screw shank design helps improve grip in hard woods and dense materials.
Electro-galvanized finish provides basic corrosion resistance for general construction use.
Wire-collated format is designed for compatible 15 degree coil nailers.
Full round head provides reliable surface holding power.
Suitable for siding, sheathing, fencing, framing, underlayment and fiber cement board applications.
Bright, electro-galvanized, hot dip galvanized and stainless steel options are available.
Smooth, ring and screw shank options can be supplied for different fastening requirements.
| Specification | Details |
|---|---|
| Product Name | 15 Degree Galvanized Screw Shank Coil Siding Nails 2-1/4 Inch x .099 |
| Fastener Type | Wire Collated Coil Siding Nails / Coil Framing Nails |
| Collation Angle | 15 Degree |
| Material | Carbon Steel |
| Diameter | 0.099 inch / 2.5mm |
| Length | 2-1/4 inch / 57mm |
| Shank Type | Screw Shank |
| Finish | Electro-Galvanized |
| Collation | Wire Collated |
| Head Type | Full Round Head |
| Compatible Tools | Compatible 15 degree wire coil siding nailers, coil framing nailers and coil pallet nailers. Confirm angle, collation, diameter and length before ordering. |
| Main Applications | Siding, sheathing, ply bracing, fencing, timber framing, composition roofing, underlayments, fiber cement boards, cabinet frames and furniture frames |
| Finish | Length mm | Diameter mm | Shank Type |
|---|---|---|---|
| Bright | 25-150 | 2.0-3.76 | Smooth, Ring, Screw |
| Electro-Galvanized | 25-150 | 2.0-3.76 | Smooth, Ring, Screw |
| Hot Dip Galvanized | 25-150 | 2.0-3.76 | Smooth, Ring, Screw |
| Stainless Steel 304 / 316 | 25-150 | 2.0-3.76 | Smooth, Ring, Screw |
These 15 Degree Galvanized Screw Shank Coil Siding Nails are optimized for siding and framing projects requiring reliable holding strength. Contact KYA Fasteners for bulk orders, screw shank nails, ring shank nails, hot dip galvanized nails, stainless steel nails and custom packaging.
| Shank Type | Recommended Use | Main Benefit |
|---|---|---|
| Smooth Shank | General construction, framing, trim and temporary wood fastening. | Fast driving and economical fastening. |
| Ring Shank | Siding, sheathing, fencing, softwood framing and high-wind applications. | Improved pull-out resistance and stronger holding power. |
| Screw Shank | Hard woods, dense boards, crates, exterior siding and applications requiring stronger grip. | Creates a tighter groove in material and resists backing out. |
| Annular Thread Shank | Wood panels, sheetrock, underlayment and selected board fastening applications. | Enhances grip and helps reduce loosening. |
| Finish | Recommended Use |
|---|---|
| Bright Finish | Dry indoor framing, cabinet frames, furniture frames and non-corrosion applications. |
| Electro-Galvanized EG | General construction and light humidity applications requiring basic corrosion resistance. |
| Hot Dip Galvanized HDG | Outdoor siding, fencing, framing and weather-exposed applications. |
| Stainless Steel 304 / 316 | Coastal, humid, high-salt and high-corrosion environments. |
15 degree galvanized screw shank coil siding nails are suitable for exterior fastening and construction work where coil loading, full round head holding power and screw shank grip are required. They are used by siding installers, fencing contractors, framing crews, furniture factories and fastener distributors.
Siding installation and exterior trim fastening
Sheathing and wall panels
Ply bracing and underlayments
Fencing fixation and decking-related fastening
Timber framing and softer pine framing
Composition roofing and roof-related fastening
Fiber cement boards and cementitious board products
Cabinet frames, furniture frames, pallets and crates
Explore Related Wire Coil Nails
| Buyer Concern | Recommended Check |
|---|---|
| Nailer Compatibility | Confirm the tool accepts 15 degree wire-collated coil nails with .099 inch diameter and 2-1/4 inch length. |
| Collation Type | Do not mix 15 degree wire coil nails with 0 degree plastic coil siding nails unless the tool is designed for both formats. |
| Shank Type | Choose screw shank for harder wood and better withdrawal resistance; choose ring shank when extra grip in siding or sheathing is required. |
| Finish Selection | Use EG for general applications, HDG for outdoor exposure and stainless steel for coastal or high-corrosion environments. |
| Application Material | Test penetration and holding power on siding, fiber cement board, sheathing, fencing or framing material before bulk purchase. |
| Bulk Order | Confirm size, shank type, finish, coil count, carton packing, pallet packing, lead time and private-label requirements. |
| Shank Type | Holding Method | Recommended Use |
|---|---|---|
| Screw Shank | Spins into the material and forms a tight groove to resist backing out. | Hard woods, dense boards, siding, crates and applications requiring strong withdrawal resistance. |
| Ring Shank | Wood fibers lock into the ring grooves along the shank. | Siding, sheathing, fencing, high-wind areas and softwood applications. |
KYA Fasteners supplies coil siding nails, wire coil nails, coil framing nails, roofing nails, brad nails, staples and industrial fasteners for global buyers. For siding contractors, construction suppliers, fencing companies, wholesalers, importers and OEM packaging buyers, KYA can support nail size selection, shank selection, finish selection, compatible tool confirmation and export supply.
Factory supply for 15 degree galvanized screw shank coil siding nails.
2-1/4 inch x .099 specification for siding, sheathing, fencing and framing applications.
Smooth, ring, screw and annular thread shank options available.
Bright, EG, HDG and stainless steel 304 / 316 finish options available.
Bulk order support for siding nails, framing nails, fencing nails and wire coil nails.
They are used for siding, sheathing, ply bracing, fencing, timber framing, composition roofing, underlayments, fiber cement boards, cabinet frames and furniture frames.
This product is 2-1/4 inch / 57mm long with a .099 inch / 2.5mm diameter.
They are designed for compatible 15 degree wire coil nailers. Buyers should confirm tool angle, wire collation, nail diameter, nail length and head type before ordering.
Screw shank nails spin into the material while being driven, creating a tighter grip and improving withdrawal resistance in harder wood and dense materials.
Electro-galvanized nails provide basic corrosion resistance. For stronger outdoor protection, hot dip galvanized nails are recommended. For coastal or high-salt environments, stainless steel 304 or 316 nails are recommended.
15 degree wire coil nails and 0 degree plastic coil siding nails use different collation systems and are not automatically interchangeable. Always match the nail angle and collation type to the nailer specification.
They can be used for fiber cement board applications when the nail size, finish, shank type and tool compatibility match the project requirement. Always test fastening performance before bulk use.
Yes. KYA can supply coil siding nails in different lengths, diameters, shank types, finishes, carton packing and private-label packaging for bulk orders.
